Developing bioactive implants with strong mechanical properties and biomineralization activity is critical in bone repair. In this work, modified cellulose nanofiber (mCNF)-reinforced bioactive glass (BG)-polycaprolactone (PCL) hybrids (mCNF–BP) with strong biomechanics and good apatite formation ability were reported. Incorporating mCNFs shortens the forming duration of the hybrid films and enhances the biomechanical performance and in vitro apatite-formation capability. The optimized biomechanical performance of the optimal hybrid materials is produced at a relatively high mCNF content (1.0 wt%), including a considerably higher modulus of elasticity (948.65 ± 74.06 MPa). In addition, the biomineralization activity of mCNF–BP hybrids is also tailored with the increase in the mCNF contents. The mCNF–BP with 1.5 wt% and 2.0 wt% mCNFs demonstrate the best biomineralization activity after immersing in simulated body fluid for 3 days. This study suggests that mCNFs are efficient bioactive additive to reinforce BG-based hybrids’ mechanical properties and biomineralization activity.
With the gradual miniaturization of electronic devices, the thermal conductivity of electronic components is increasingly required. Epoxy (EP) resins are easy to process, exhibit excellent electrical insulation properties, and are light in weight and low in cost, making them the preferred material for thermal management applications. In order to endow EPs with better dielectric and thermal conductivity properties, bromo-oxygen-bismuth (BiOBr) prepared using the hydrothermal method was used as a filler to obtain BiOBr/EP composites, and the effect of BiOBr addition on the properties of the BiOBr/EP composites was also studied. The results showed that the addition of a small amount of BiOBr could greatly optimize the dielectric properties and thermal conductivity of EP resin, and when the content of BiOBr was 0.75 wt% and 1.00 wt%, the dielectric properties and thermal conductivity of the composite could reach the optimum, respectively. The high dielectric constant and excellent thermal conductivity of BiOBr/EP composites are mainly due to the good layered structure of BiOBr, which can provide good interfacial polarization and thermal conductivity.
Conventional bioactive ceramic implants possess high osteogenic ability but exhibit poor machinability and brittleness, which limit their wide applications. In this study, we report an elastomeric machinable bioactive nanoceramic-based hybrid membrane that is formed by nanohydroxyapatite-reinforced hybrid matrix (poly(dimethylsilicone)-bioactive glass-poly(caprolactone) (nHA-PBP)) using a modified sol-gel process. The hybrid matrix is composed of elastomeric polydimethylsiloxane and bioactive glass nanogel. The effect of the nHA contents (0, 20, 30, 40 and 50 wt%) on the physicochemical structure and biomineralization activity of PBP hybrid membranes is investigated systematically. The results show that nHA-PBP hybrid membranes containing more than 20 wt% nHA exhibit the highest apatite-forming bioactivity due to the optimized hydroxyapatite crystalline phase. NHA-PBP implants with nHA also show good elastomeric mechanical behavior and foldable mechanical properties. Furthermore, the study of the in vitro cellular biocompatibility suggests that the nHA-PBP hybrid monoliths can enhance osteoblast (MC3T3-E1) attachment and proliferation. The biomimetic hybrid composition, crack-free monolith structure, and high biological activity of apatite formation make the nHA-PBP hybrid membrane a prospective candidate in the application of bone tissue regeneration.
With the rapid development of modern electronic technology, electronic equipment tends to be dense and miniaturized, which puts forward higher thermal management requirements for epoxy resins (EP). In this paper, Al2O3 with different morphologies and different contents was used as the fillers, silane coupling agent γ-glycidyl ether oxypropyl trimethoxy-silane (KH560) was selected as the modifier to modify their surface, and the modified Al2O3/EP resin composites system were finally prepared. The effects of Al2O3 addition amount on thermal conductivity and dielectric constant of Al2O3/EP composites were investigated. The results show that the smaller size of Al2O3 has a positive effect on the thermal conductivity and dielectric properties of EP, while the modified Al2O3 can be uniformly dispersed in the EP matrix, forming a thermal conductivity network, the thermal conductivity of modified Al2O3/EP composite is significantly increased. The good thermal conductivity can meet the requirements of the field of microelectronics components for thermal conductivity.