Thirty groundwater samples were taken from Assiut’s northern outskirts. The physicochemical properties of these samples were investigated. For the evaluation of water–rock interaction, the saturation index (SI), chloro-alkaline indices (CAI1 and CAI2), Gibbs ratios for cations and anions (GC and GA), principal component analysis (PCA), and hierarchical cluster analysis (HCA) were used. (1) With the exception of five samples that were supersaturated, the rest of the groundwater samples were under-saturated with carbonate mineral dissolution (calcite, dolomite, and aragonite) and evaporite mineral dissolution (anhydrite, gypsum, halite, and sylvite). (2) The presence of ion exchange between alkali elements (Na⁺ + K⁺) and earth alkaline elements (Ca²⁺ + Mg²⁺) is explained by the positive values of the chloro-alkaline indices. (3) In four groundwater samples, negative chloro-alkaline indices suggest reverse ion exchange and an increasing alkali element content. (4) The Gibbs diagram demonstrates that, with the exception of four samples that reflect saline groundwater, the majority of the groundwater samples are freshwater recharging from the fresh surface water in the research area. (5) Groundwater types include Ca-HCO₃ (11%), Mg-HCO₃ (48%), Na-HCO₃ (23%), Mg-Cl (13%), and Na-Cl (3%). (6) The alkali, earth alkaline elements, and sulphate are the key controls on groundwater salinity, according to PCA and HCA. (7) The somewhat saline groundwater in the research area’s western desert margins should not be used since it poses a health danger to people.

Energy consumption for cooling purposes has increased significantly in recent years, mainly due to population growth, urbanization, and climate change consequences. The situation can be mitigated by passive climate solutions to reduce energy consumption in buildings. This study investigated the effectiveness of the green roof concept in reducing energy demand for cooling in different climatic regions. The impact of several types of green roofing of varying thermal conductivity and soil depth on energy consumption for cooling school buildings in Egypt was examined. In a co-simulation approach, the efficiency of the proposed green roof types was evaluated using the Design-Builder software, and a cost analysis was performed for the best options. The results showed that the proposed green roof types saved between 31.61 and 39.74% of energy, on average. A green roof featuring a roof soil depth of 0.1 m and 0.9 W/m-K thermal conductivity exhibited higher efficiency in reducing energy than the other options tested. The decrease in air temperature due to green roofs in hot arid areas, which exceeded an average of 4 °C, was greater than that in other regions that were not as hot. In conclusion, green roofs were shown to be efficient in reducing energy consumption as compared with traditional roofs, especially in hot arid climates.

Building insulation based on nanomaterials is considered one of the most effective means of reducing energy consumption in the hot desert climate. The application of an energy-efficient insulation system can significantly decrease the energy consumed via a building’s air-conditioning system during the summer. Hence, building insulation has become an interesting research topic, especially with regards to the use of insulation based on nanomaterials due to their low U-values. In the present study, the use of nano vacuum insulation panels (VIPs) or polystyrene foam in the walls enabled a significant reduction in the annual energy consumption, a savings of 23% compared to the uninsulated wall in a study in New Aswan City. The application of nanogel glazing to the windows (two layers of clear glass filled with the nanogel) achieved approximately 11% savings in annual energy. This savings, twice that obtained by using double-glazed windows, could be due to the low U-value of nanogel compared to the U-values of argon or air. The embedded nanogel layer between two layers of argon and two layers of single clear glass showed a significant reduction in annual energy consumption, saving 26% compared to the use of a single layer of glass. Moreover, the integration between this window and embedded walls with 50 mm of polystyrene foam exhibited a significant improvement of energy efficiency by 47.6% while presenting the lowest value of simple payback period (SPP). This research provides a way for buildings to be insulated to make them more energy efficient as well as attractive from the economic standpoint.

Every day, mining corporations grow and develop over Egypt’s Eastern Desert in search of gold, silver, and other metals. Mineral resources in Egypt are a powerful tool for increasing national income. In this study, we are interested in mineral exploration, such as gold and porphyry deposits, using aeromagnetic data, applying various processing techniques such as First Vertical Derivative, Total Horizontal Gradient, Analytical Signal, Tilt Derivative, and the center of exploration targeting (CET). The study area is located at the Central Eastern Desert, which includes the Barramiya, Abu Marwa, and Abu Mireiwah regions. The analysis of the delineated structural trends shows that the N–S, NW–SE, and NE–SW are the most effective directions for managing deposits in the investigated area. A minor trend is also shown in the E–W direction and corresponds to the alteration zones reported by geology and prior investigations. Mineralization zones occur most frequently at the contact between ophiolitic serpentinite, sediments, and other rock types. This study intends to add more about the use of the recently developed technology of CET grid analysis for mineral exploration and structural interpretation across the Central Eastern Desert. The CET porphyry analysis map shows locations where several occurrences of porphyry deposits are probable. The newly discovered spots are similar to the area’s usual deposit sites. This study proves that aeromagnetic data are significant in mineral exploration since they are useful for the discovery of the structure and shear zones controlling the mineralization zones.

Saudi Arabia is seeking fresh groundwater resources to face the increase in anthropogenic activities. The groundwater storage variations and occurrence were investigated and the surface and subsurface structures influencing the groundwater resources in the research area were defined using a combined study of Gravity Recovery and Climate Experiment, aeromagnetic data, and electrical resistivity data with other relevant datasets. Results are: The groundwater storage fluctuation is calculated at −0.34 ± 0.01 mm/yr during the period 04/2002-12/2021. The area is receiving an average annual rainfall rate of 117.6 mm during the period 2002 to 2019. Three structural trends, defined in the directions of NS, NNW, and NNE are cutting the sedimentary cover and the basement rocks. The sedimentary cover ranges from 0 to 1.2 km thick. Vertical electrical sounding results indicate three main geoelectric layers: the surface geoelectrical layer of higher resistivity values (428-9626 Ω. m) is made up of unconsolidated Quaternary sediments; the water-bearing layer of saturated sands with a resistivity range between 5.1 and 153 Ω. m and with depths vary from 1 to 94 m, and highly fractured basement rocks with resistivity values ranging from 813 to 6030 Ω. m. The integrated results are useful in providing a comprehensive image of the study area’s surface and subsurface structures, as well as groundwater potential in the southwestern part of Saudi Arabia. Our integrated approach provides a reproducible model for assessing groundwater potential in arid and semiarid areas.