Mohamed Hssan Hassan Abdelhafez

Prof. Mohamed Hssan Hassan Abdelhafez

University of Ha'il, Ha'il, Saudi Arabia
+1
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 May 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Ahmed AbdelradyAhmed Abdelrady
Ahmed Abdelrady
Mohamed Hssan Hassan AbdelhafezMohamed Hssan Hassan Abdelhafez
Mohamed Hssan Hassan Abdelhafez
Ayman RagabAyman Ragab
Ayman Ragab
Building insulation based on nanomaterials is considered one of the most effective means of reducing energy consumption in the hot desert climate. The application of an energy-efficient insulation system can significantly decrease the energy consumed via a building’s air-conditioning system during the summer. Hence, building insulation has become an interesting research topic, especially with regards to the use of insulation based on nanomaterials due to their low U-values. In the present study, the use of nano vacuum insulation panels (VIPs) or polystyrene foam in the walls enabled a significant reduction in the annual energy consumption, a savings of 23% compared to the uninsulated wall in a study in New Aswan City. The application of nanogel glazing to the windows (two layers of clear glass filled with the nanogel) achieved approximately 11% savings in annual energy. This savings, twice that obtained by using double-glazed windows, could be due to the low U-value of nanogel compared to the U-values of argon or air. The embedded nanogel layer between two layers of argon and two layers of single clear glass showed a significant reduction in annual energy consumption, saving 26% compared to the use of a single layer of glass. Moreover, the integration between this window and embedded walls with 50 mm of polystyrene foam exhibited a significant improvement of energy efficiency by 47.6% while presenting the lowest value of simple payback period (SPP). This research provides a way for buildings to be insulated to make them more energy efficient as well as attractive from the economic standpoint.

8 February 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Mohamed Hssan Hassan AbdelhafezMohamed Hssan Hassan Abdelhafez
Mohamed Hssan Hassan Abdelhafez
MTMabrouk Touahmia
Mabrouk Touahmia
Emad NoaimeEmad Noaime
Emad Noaime
GAGhazy Albaqawy
Ghazy Albaqawy
KEKalled Elkhayat
Kalled Elkhayat
MBMustapha Boukendakdji
Mustapha Boukendakdji
In recent years, most cities have faced great demand for electricity supply due to rapid population growth and industrialization. Supplying sufficient electrical energy, while reducing greenhouse gas emissions, is one of the major concerns of policymakers and scientists all over the world. In Saudi Arabia, local authorities are increasingly aware of the necessity of reducing the environmental impact of nonrenewable energy by exploring alternative sustainable energy sources and improving buildings’ energy efficiency. Recently, building-integrated photovoltaic (BIPV) technology has been regarded as a promising technology for generating instantaneous sustainable energy for buildings. To achieve a substantial contribution regarding zero energy buildings, solar energy should be widely used in residential buildings within the urban context. This paper examines how to achieve an appropriate model for integrating photovoltaics on the rooftop of residential buildings in Hail city to provide alternative energy sources. The estimated rooftop areas in Hail city, utilizable for PV application were calculated. Using PV*SOL simulation software, the performance ratio and the system efficiency, as well as the annual energy output in several tilt angles, were determined and presented. The amount of energy expected when using all effective roof area in the city was also calculated. The amount of CO2 emissions that could be reduced as a result of using a PV system was estimated. The results show a significant area of rooftop suitable for PV system in residential buildings in Hail city, which exceeds 9 million square meters. On the other hand, the performance ratio and the system efficiency are affected by the tilt angle of the PV module, where the efficiency increases with higher tilt angle, this is due to the PV module temperature, where, with the decrease in the PV module temperature its efficiency increases. The results indicate that the 30° tilt PV produced the highest amount of energy, whereas the 75° tilt PV records the smallest one although it achieves the best possible efficiency. There is a significant amount of energy produced from the use of all residential rooftops in Hail, and there is also a significant reduction in the amount of CO2 emissions. It is expected that this research would develop innovative building design strategies and specifications allowing for better climate and energy efficiency as well.

15 May 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
ATEF AHRIZATEF AHRIZ
ATEF AHRIZ
Abdelhakim MesloubAbdelhakim Mesloub
Abdelhakim Mesloub
LDLeila Djeffal
Leila Djeffal
Badr AlsolamiBadr Alsolami
Badr Alsolami
Aritra GhoshAritra Ghosh
Aritra Ghosh
Mohamed Hssan Hassan AbdelhafezMohamed Hssan Hassan Abdelhafez
Mohamed Hssan Hassan Abdelhafez
Engineers use double-skin façades (DSF) to lower the energy consumption of buildings as they can potentially control incoming wind speeds and the amount of solar heat gain. The purpose of this present study was to (1) evaluate the use of DSFs, (2) its efficacy in improving the energy performance of high-rise office buildings in the hot, dry summer climate of the Mediterranean, and (3) to develop an optimum DSF model for this climate based on industry standards and recommendations for high-performance DSF parameters. In order to determine the efficiency of DSFs, two distinct variables, building orientation and the number of DSFs used, were taken into consideration. This study adopted an experimental (generate and test) research design and used Autodesk® Ecotect® Analysis software to develop computer simulations with which to assess 15 single façades, juxtaposed façades, three façades, and four façades on cardinal orientations. The recorded energy consumption and savings were then compared with that of the reference model. The results indicated that the three DSF model, i.e., the S14 model, reduced energy consumption during heating by 28% and by 53.5% when cooling a high-rise office building located in the hot, dry summer climate of the Mediterranean (Csa).

1 April 2025 in Frontiers of Architectural Research
Verified
Journal Article
Open access
KEKhaled Elkhayat
Khaled Elkhayat
Mohamed Hssan Hassan AbdelhafezMohamed Hssan Hassan Abdelhafez
Mohamed Hssan Hassan Abdelhafez
FAFatmaelzhraa Altaf
Fatmaelzhraa Altaf
Steve SharplesSteve Sharples
Steve Sharples
MAMohammad A. Alshenaifi
Mohammad A. Alshenaifi
Ayman RagabAyman Ragab
Ayman Ragab

30 August 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Mohamed Hssan Hassan AbdelhafezMohamed Hssan Hassan Abdelhafez
Mohamed Hssan Hassan Abdelhafez
FAFatmaelzhraa medhat Altaf
Fatmaelzhraa medhat Altaf
MAMohammad Alshenaifi
Mohammad Alshenaifi
OHOmar Hamdy
Omar Hamdy
Ayman RagabAyman Ragab
Ayman Ragab
Outdoor thermal comfort is one of the essential characteristics of effective urban planning. The aspect ratio and orientation of the street canyon influence the thermal performance. Regulations standardize construction rules without accounting for regional climatic variations or the effect of these limits on pedestrian thermal comfort. The purpose of this paper is to provide an understanding of the effects of aspect ratios and street canyon orientations on thermal comfort in Alexandria, representing the North Coast Region of Egypt, and Aswan, representing the Southern Egypt Region, using ENVI-met and RayMan software for various aspect ratios and street canyon orientations scenarios. As a result, the aspect ratio (AR = 2.5) gives the best thermal conditions in all the scenarios evaluated in both cities, whereas the aspect ratio (AR = 1) provides the worst. Despite having the highest PET value among the investigated scenarios, the Northeast-Southwest street canyon in Aswan City has the least uncomfortable thermal hours. The North-South street canyon in Alexandria City has the best thermal performance, followed by the Northwest-Southeast street canyon. Finally, it was shown that the aspect ratio and the orientation of the street canyons in the North Coast and Southern Egypt regions can support pedestrian thermal comfort.

13 March 2023 in Buildings
Verified
Journal Article
Open access
PDF file
Mohamed Hssan Hassan AbdelhafezMohamed Hssan Hassan Abdelhafez
Mohamed Hssan Hassan Abdelhafez
AAAli Abdulmohsen Aldersoni
Ali Abdulmohsen Aldersoni
Mohammed M GomaaMohammed M Gomaa
Mohammed M Gomaa
Emad NoaimeEmad Noaime
Emad Noaime
Mohammed Mashary AlnaimMohammed Mashary Alnaim
Mohammed Mashary Alnaim
Ayman RagabAyman Ragab
Ayman Ragab
Most new housing designs in Saudi Arabia are created to meet the client’s needs with minimal regard for environmental or energy-related considerations, resulting in buildings’ poor thermal performance and a growing reliance on artificial means. Polycarbonate windows have recently acquired popularity. Yet, there is a rising interest in combining polycarbonate windows with nanomaterials to reduce energy consumption, especially during the summer months when air conditioning use is at its peak. To improve building insulation, this research concentrated on the use of polycarbonate windows with nanogel, which has a low U-value. This study utilized polycarbonate windows with nanogel (two layers of polycarbonate panes filled with nanogel) in Hail City, Saudi Arabia, using DesignBuilder simulation software, resulting in a 14.3% reduction in annual energy consumption. The low U-value of nanogel compared to argon or air may be the cause of these savings, which are roughly double those gained by using double-paned polycarbonate windows. The incorporated nanogel layer between two layers of argon and two layers of polycarbonate panes decreased annual energy consumption by 29% compared to utilizing only one polycarbonate layer. Moreover, compared to a single 3 mm polycarbonate pane, the nanogel layer placed between two layers of argon and two layers of single polycarbonate panes demonstrated the lowest level of CO2 emissions, with an improvement of around 22.23%. This study reveals a method for insulating buildings that cuts energy use and CO2 emissions. This study’s conclusion supports the notion that sustainable design is the future. Sustainable construction can dramatically reduce building cooling costs and thermal loads.