TanBaohai Tan

Dr. TanBaohai Tan

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2021 in Sensors
Verified
Journal Article
Open access
PDF file
KZkai zhang
kai zhang
TTTanBaohai Tan
TanBaohai Tan
WZWenxiu Zhang
Wenxiu Zhang
YSYuntao Sun
Yuntao Sun
JZJian Zheng
Jian Zheng
SXShoutao Xin
Shoutao Xin
To obtain qualified logging while drilling (LWD) data, a new acoustic LWD tool was designed. Its overall design is introduced here, including the physical construction, electronic structure, and operation flowchart. Thereafter, core technologies adopted in this tool are presented, such as dominant exciting wave bands of dipole source, a sine wave pulse excitation circuit, broadband impedance matching, and an intellectualized active reception transducer. Lastly, we tested this tool in the azimuthal anisotropy module well, calibration well, and normal well, working in the model of the cable, sliding eye, and logging while drilling. Experiments showed that the core technologies achieved ideal results and that the LWD tool obtained qualified data.

28 April 2017 in Sensors
Verified
Journal Article
Open access
PDF file
KZKai Zhang
Kai Zhang
TTTanBaohai Tan
TanBaohai Tan
XLXianping Liu
Xianping Liu
Array transducer and transducer combination technologies are evolving rapidly. While adapting transmitter combination technologies, the parameter consistencies between each transmitter are extremely important because they can determine a combined effort directly. This study presents a consistency evaluation and calibration method for piezoelectric transmitters by using impedance analyzers. Firstly, electronic parameters of transmitters that can be measured by impedance analyzers are introduced. A variety of transmitter acoustic energies that are caused by these parameter differences are then analyzed and certified and, thereafter, transmitter consistency is evaluated. Lastly, based on the evaluations, consistency can be calibrated by changing the corresponding excitation voltage. Acoustic experiments show that this method accurately evaluates and calibrates transducer consistencies, and is easy to realize.

23 May 2017 in Journal of Geophysics and Engineering
Verified
Journal Article
Closed access
PDF file
KZK Zhang
K Zhang
XJX D Ju
X D Ju
TTTanBaohai Tan
TanBaohai Tan
JLJ Q Lu
J Q Lu
BMB Y Men
B Y Men
JCJ Y Chen
J Y Chen
The traditional transducer coupled excitation method for acoustic logging tools has many disadvantages given its transformer characteristics. A new excitation method that uses a complex programmable logic device and vertical metal oxide semiconductor field effect transistor is proposed in this study. Theoretical calculations, finite element analyses and acoustic experiments are performed to compare the acoustic and electrical characteristics of the new and the traditional methods. Results show that the acoustic waves emitted by the new method have lower dominant frequencies and approximately four times more acoustic energy than those emitted by the transformer coupled method. Furthermore, the adjustment functions and channel consistencies of the new electrical circuit are better than those of the traditional method. All the results indicate that the logging tools that use the new method are more flexible and accurate with better detection depth and sensitivity. This method has already been used in logging tools and has improved their performance.

1 November 2022 in Sensors
Verified
Journal Article
Open access
PDF file
KZkai zhang
kai zhang
SLShengQing Li
ShengQing Li
YSYuanda Su
Yuanda Su
TTTanBaohai Tan
TanBaohai Tan
BZBo Zhang
Bo Zhang
Well logging is performed in oil and gas exploration wells to obtain the physical characteristics of underground formations. Thereafter, these wells are cased. Through-casing logging is important in mature fields and for wells that are cased without logging due to borehole stability issues. Acoustic through-casing logging is a challenging issue due to the strong interference of casing waves in formation waves, especially when the casing and formation are poorly bonded. An acoustic tool with dual-source transmitters is developed, in which an additional transducer is added to suppress casing waves. First, the operation principle and the overall design of the tool are carried out, including the span distance between the two transmitting transducers and the spacing distance between the transmitting transducer and the receiving transducers. Thereafter, a dual-source transmitting circuit is designed to send out two excitation signals of opposite polarities. These signals possess good consistency, high emission power, and precise signal adjustment. Lastly, the tool is tested in cased exploration wells in China. The experiment endings show that about 90% of the casing waves are canceled. By suppressing the casing wave amplitude, the cased-hole acoustic logging can be used commercially to obtain trustworthy formation information.

1 April 2019 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
YYY. C. Yao
Y. C. Yao
TTTanBaohai Tan
TanBaohai Tan
KZKai Zhang
Kai Zhang
Laboratory testing is a pre-requisite for the practical application of new methods and techniques, and it is crucial in the research and development of acoustic well-logging tools. Various tools have been developed based on different acoustic logging theories and methods. Thus, these tools are equipped with different acoustic sonde structures. To meet the test requirements of different tools in a laboratory environment, we designed a general experimental system that includes hardware platform, software platform, and model wells according to the common structure of actual logging tools. Similar to the internal electrical structure of downhole tools, the hardware platform consists of several main parts, such as power supply, control and telemetering, acoustic emission, and data acquisition. The functions of this hardware platform include controlling the working sequence of the experiment, exciting the transmitter sonde, and collecting the acoustic signals received by the receiver sonde. The software platform installed in the host computer provides a human–computer interface for the experimental system to complete the data transmission between the host computer and the hardware platform, store measured data, and process the data in real time. The model wells approximate the actual engineering environment and stratum condition for system testing. A series of practical laboratory experiments is conducted in the model wells by using this experimental system. The process proves that the hardware and software of the experimental system can work in coordination, and the experimental system meets the basic testing requirements of conventional acoustic logging tools.

7 February 2026 in Sensors
Verified
Journal Article
Open access
PDF file
KZkai zhang
kai zhang
XWXinyan Wang
Xinyan Wang
TTTanBaohai Tan
TanBaohai Tan
YSYuanda Su
Yuanda Su
Acoustic logging tools, deployed thousands of meters underground to detect geological structures and evaluate reservoir fluids, are essential for oil and gas exploration and development. These tools generate acoustic signals through piezoelectric ceramic transducers. The material properties of piezoelectric ceramics are significantly affected by the high-temperature downhole environment, leading to a failure in impedance matching between the transducer and its excitation circuit. This results in a substantial degradation of the tool’s performance. This paper experimentally obtains the electrical parameters and excitation energy of commonly used monopole transducers at different temperatures. Based on this data, the optimal matching inductance values at various temperatures are calculated. A temperature-adaptive transducer excitation circuit is then designed and implemented. This circuit can adjust the excitation frequency according to the measured temperature to compensate for resonant frequency drift and select the optimal inductor tap via a programmable multiplexer. Experimental results demonstrate that this circuit significantly enhances the transducer’s excitation energy at high temperatures. This technology is expected to markedly improve the operational stability of acoustic logging tools and facilitate the exploration and development of deep and ultra-deep oil and gas resources.