Hyperspectral imaging technology holds great potential for various stages of the mining life cycle, both in active and abandoned mines, from exploration to reclamation. The technology, however, has yet to achieve large-scale industrial implementation and acceptance. While hyperspectral satellite imagery yields high spectral resolution, a high signal-to-noise ratio (SNR), and global availability with breakthrough systems like EnMAP, EMIT, GaoFen-5, PRISMA, and Tanager-1, limited spatial and temporal resolution poses challenges for the mining sectors, which require decimetre-to-centimetre-scale spatial resolution for applications such as reconciliation and environmental monitoring and daily temporal revisit times, such as for ore/waste estimates and geotechnical assessments. Hyperspectral imaging from drones (Uncrewed Aerial Systems; UASs) offers high-spatial-resolution data relevant to the pit/mine scale, with the capability for frequent, user-defined re-visit times for areas of limited extent. Areas of interest can be defined by the user and targeted explicitly. Collecting data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions offers the detection of different minerals and surface alteration patterns, potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. This is related to but not exclusive to detecting deleterious minerals for different processes (e.g., clays, iron oxides, talc), secondary iron oxides indicating the leakage of acid mine drainage for rehabilitation efforts, swelling clays potentially affecting rock integrity and stability, and alteration minerals used to vector toward economic mineralisation (e.g., dickite, jarosite, alunite). In this paper, we review applicable instrumentation, software components, and relevant studies deploying hyperspectral imaging datasets in or appropriate to the mining sector, with a particular focus on hyperspectral VNIR-SWIR UASs. Complementarily, we draw on previous insights from airborne, satellite, and ground-based imaging systems. We also discuss common practises for UAS survey planning and ground sampling considerations to aid in data interpretation.

Mineral resource exploration and mining is an essential part of today's high-tech industry. Elements such as rare-earth elements (REEs) and copper are, therefore, in high demand. Modern exploration techniques from multiple platforms (e.g., spaceborne and airborne), to detect and map the spectral characteristics of the materials of interest, require spectral libraries as an essential reference. They include field and laboratory spectral information in combination with geochemical analyses for validation. Here, we present a collection of REE- and copper-related hyperspectral spectra with associated geochemical information. The libraries contain reflectance spectra from rare-earth element oxides, REE-bearing minerals, copper-bearing minerals and mine surface samples from the Apliki copper–gold–pyrite mine in the Republic of Cyprus. The samples were measured with the HySpex imaging spectrometers in the visible and near infrared (VNIR) and shortwave infrared (SWIR) range (400–2500 nm). The geochemical validation of each sample is provided with the reflectance spectra. The spectral libraries are openly available to assist future mineral mapping campaigns and laboratory spectroscopic analyses. The spectral libraries and corresponding geochemistry are published via GFZ Data Services with the following DOIs: https://doi.org/10.5880/GFZ.1.4.2019.004 (13 REE-bearing minerals and 16 oxide powders, Koerting et al., 2019a), https://doi.org/10.5880/GFZ.1.4.2019.003 (20 copper-bearing minerals, Koellner et al., 2019), and https://doi.org/10.5880/GFZ.1.4.2019.005 (37 copper-bearing surface material samples from the Apliki copper–gold–pyrite mine in Cyprus, Koerting et al., 2019b). All spectral libraries are united and comparable by the internally consistent method of hyperspectral data acquisition in the laboratory.

Growing awareness of the environmental cost of mining operations has led to increased research on monitoring and restoring legacy mine sites. Hyperspectral imaging (HSI) has emerged as a valuable tool in the mining life cycle, including post-mining environment. By detecting variations in crystal structure and physicochemical attributes on the surface of materials, HSI provides insights into site environmental and ecological conditions. Here, we explore the capabilities of drone-based HSI for mapping surface patterns related to contamination dispersal in a legacy uranium-rare earth element mine site. Hyperspectral data across the visible to near-infrared (VNIR) and short-wave infrared (SWIR) wavelength ranges (400–2500 nm) were collected over selected areas of the former Mary Kathleen mine site in Queensland, Australia. Analyses were performed using data-driven (Spectral Angle Mapper—SAM) and knowledge-based (Band Ratios—BRs) spectral processing techniques. SAM identifies contamination patterns and differentiates mineral compositions within visually similar areas. However, its accuracy is limited when mapping specific minerals, as most endmembers represent mineral groups or mixtures. BR highlights reactive surfaces and clay mixtures, reinforcing key patterns identified by SAM. The results indicate that drone-based HSI can capture and distinguish complex surface trends, demonstrating the technology’s potential to enhance the assessment and monitoring of environmental conditions at a mine site.

Mine wastes, including tailings (the by-products of mineral processing), are subject to weathering, leading to environmental issues. During the last decades, the traditional, cost-effective, and time-consuming field methods are replaced by remote sensing (RS), which is based on multispectral and hyperspectral data for mining monitoring. In this case study, we investigate the waste material of an inactive bauxite mine in Greece. We select satellite data with different spatial and spectral resolutions to map mining wastes.The goal of this study is to classify mine waste based on mineral indicators using the Spectral Angle Mapper (SAM) with hyperspectral and multispectral data. Moreover, spectral signatures of minerals from two different spectral libraries are used, namely the United States Geological Survey (USGS) Spectral Library and the Jet Propulsion Laboratory (JPL) Spectral Library. The spectral signatures related to the objective of this study are resampled to the Environmental Mapping and Analysis Program (EnMap), Sentinel-2, and World View 3 (WV3) spectral bands.We present the results of all datasets. We also describe each satellite sensor's capability to map and discriminate the specified mineral indicators and refer to their detected differences. This study demonstrates that RS exhibits varying levels of effectiveness based on data spatial and spectral resolution to identify and map mineral indicators.