Hyperspectral imaging technology holds great potential for various stages of the mining life cycle, both in active and abandoned mines, from exploration to reclamation. The technology, however, has yet to achieve large-scale industrial implementation and acceptance. While hyperspectral satellite imagery yields high spectral resolution, a high signal-to-noise ratio (SNR), and global availability with breakthrough systems like EnMAP, EMIT, GaoFen-5, PRISMA, and Tanager-1, limited spatial and temporal resolution poses challenges for the mining sectors, which require decimetre-to-centimetre-scale spatial resolution for applications such as reconciliation and environmental monitoring and daily temporal revisit times, such as for ore/waste estimates and geotechnical assessments. Hyperspectral imaging from drones (Uncrewed Aerial Systems; UASs) offers high-spatial-resolution data relevant to the pit/mine scale, with the capability for frequent, user-defined re-visit times for areas of limited extent. Areas of interest can be defined by the user and targeted explicitly. Collecting data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions offers the detection of different minerals and surface alteration patterns, potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. This is related to but not exclusive to detecting deleterious minerals for different processes (e.g., clays, iron oxides, talc), secondary iron oxides indicating the leakage of acid mine drainage for rehabilitation efforts, swelling clays potentially affecting rock integrity and stability, and alteration minerals used to vector toward economic mineralisation (e.g., dickite, jarosite, alunite). In this paper, we review applicable instrumentation, software components, and relevant studies deploying hyperspectral imaging datasets in or appropriate to the mining sector, with a particular focus on hyperspectral VNIR-SWIR UASs. Complementarily, we draw on previous insights from airborne, satellite, and ground-based imaging systems. We also discuss common practises for UAS survey planning and ground sampling considerations to aid in data interpretation.

The mineral-mapping capability of three spaceborne sensors with different spatial and spectral resolutions, the Environmental Mapping and Analysis Program (EnMap), Sentinel-2, and World View-3 (WV3), is assessed regarding bauxite mining wastes in Amphissa, Greece, with validation based on ground samples. We applied the well-established Linear Spectral Unmixing (LSU) and Spectral Angle Mapping (SAM) classification techniques utilizing endmembers of two established spectral libraries and incorporated ground data through geochemical and mineralogical analyses, X-ray fluorescence (XRF), Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS), and X-ray Diffraction (XRD), to assess classification performance. The main lithologies in this area are bauxites and limestones; therefore, aluminum oxyhydroxides, calcite, and iron oxide minerals were the dominant phases as indicated by the XRF/XRD results. Almost all target minerals were mapped with the three sensors and both methods. The performance of EnMap is affected by its coarser spatial resolution despite its higher spectral resolution using these methods. Sentinel-2 is most effective for mapping iron-bearing minerals, particularly hematite, due to its higher spatial resolution and the presence of diagnostic iron oxide absorption features in the VNIR. World View 3 Shortwave Infrared (WV3-SWIR) performs better when mapping calcite, benefiting from its eight SWIR spectral bands and very high spatial resolution (3.7 m). Hematite and calcite yield the highest accuracy, especially with SAM, indicating 0.80 for Sentinel-2 (10 m) for hematite and 0.87 for WV3-SWIR (3.7 m) for calcite. AlOOH shows higher accuracy with SAM, ranging from 0.57 to 0.80 across the sensors, while LSU shows lower accuracy, ranging from 0.20 to 0.73 across the sensors. This study showcases each sensor’s ability to map minerals while also demonstrating that spectral coverage and the spatial and spectral resolution, as well as the characteristics of the selected endmembers, exert a critical influence on the accuracy of mineral mapping in mine waste.

Mine wastes, including tailings (the by-products of mineral processing), are subject to weathering, leading to environmental issues. During the last decades, the traditional, cost-effective, and time-consuming field methods are replaced by remote sensing (RS), which is based on multispectral and hyperspectral data for mining monitoring. In this case study, we investigate the waste material of an inactive bauxite mine in Greece. We select satellite data with different spatial and spectral resolutions to map mining wastes.The goal of this study is to classify mine waste based on mineral indicators using the Spectral Angle Mapper (SAM) with hyperspectral and multispectral data. Moreover, spectral signatures of minerals from two different spectral libraries are used, namely the United States Geological Survey (USGS) Spectral Library and the Jet Propulsion Laboratory (JPL) Spectral Library. The spectral signatures related to the objective of this study are resampled to the Environmental Mapping and Analysis Program (EnMap), Sentinel-2, and World View 3 (WV3) spectral bands.We present the results of all datasets. We also describe each satellite sensor's capability to map and discriminate the specified mineral indicators and refer to their detected differences. This study demonstrates that RS exhibits varying levels of effectiveness based on data spatial and spectral resolution to identify and map mineral indicators.

Hyperspectral imaging data holds great potential for the different stages of the mining life cycle in active and post-mining environments. However, the technology has yet to reach the stage of large-scale industrial implementation and acceptance. While hyperspectral satellite imagery can achieve high spectral resolution, signal-to-noise ratio (SNR) and global availability with break-through satellite systems like EnMAP, EMIT and PRISMA, limited spatial resolution poses chal-lenges for sectors like mining, which require decimetre to centimetre scale resolution for applica-tions such as reconciliation, ore/waste estimates, geotechnical assessments and environmental monitoring. Hyperspectral imaging from drones (referred to herein as Uncrewed Aerial Systems; UASs) offers high spatial resolution data relevant to the camp/ mine scale, with the capability for frequent, user-defined re-visit times. This has been made possible by the miniaturization of hy-perspectral imaging systems. Collection of data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions enables the detection of different minerals and surface altera-tion patterns potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. In this paper, we provide a review of relevant studies de-ploying hyperspectral imaging in or applicable to the mining sector, especially for the use of hy-perspectral VNIR-SWIR Uncrewed Aerial Systems. Where required, we draw on previous in-sights derived from satellite or ground-based systems. We also discuss UAS survey planning, and sampling considerations for validation and interpretation.

Hyperspectral imaging data holds great potential for various stages of the mining life cycle in active and abandoned mines. The technology, however, has yet to achieve large-scale industrial implementation and acceptance. While hyperspectral satellite im-agery yields high spectral resolution, high signal-to-noise ratio (SNR), and global availability with breakthrough satellite sys-tems like EnMAP, EMIT, and PRISMA, limited spatial resolution poses challenges for mining sectors, which require decimeter- to centimeter-scale spatial resolution for applications such as reconciliation, ore/waste estimates, geotechnical assessments, and en-vironmental monitoring. Hyperspectral imaging from drones (Uncrewed Aerial Systems; UASs) offers high spatial resolution data relevant to the pit/ mine scale, with the capability for frequent, user-defined re-visit times. Collecting data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions offers to detect different minerals and surface alteration patterns, potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. In this paper, we review of applicable instrumentation, software components, and relevant studies deploying hyperspectral imaging in or appropriate to the mining sector, especially for hyperspectral VNIR-SWIR UASs. If directly applicable, draw on previous insights derived from airborne, satellite, and ground-based imaging systems. We also discuss common practices for UAS survey planning and sampling considerations for interpretation.