The anti-reflection properties of hard material surfaces are of great significance in the fields of infrared imaging, optoelectronic devices, and aerospace. Femtosecond laser processing has drawn a lot of attentions in the field of optics as an innovative, efficient, and green micro-nano processing method. The anti-reflection surface prepared on hard materials by femtosecond laser processing technology has good anti-reflection properties under a broad spectrum with all angles, effectively suppresses reflection, and improves light transmittance/absorption. In this review, the recent advances on femtosecond laser processing of anti-reflection surfaces on hard materials are summarized. The principle of anti-reflection structure and the selection of anti-reflection materials in different applications are elaborated upon. Finally, the limitations and challenges of the current anti-reflection surface are discussed, and the future development trend of the anti-reflection surface are prospected.

Photodetectors converting optical signals into electrical signals have been widely utilized and have received more and more attention in scientific research and industrial fields including optical interconnection, optical communication, and environmental monitoring. Herein, we summarize the latest development of photodetectors with different micro-nano structures and different materials and the performance indicators of photodetectors. Several photodetectors, such as flexible, ultraviolet two-dimensional (2D) microscale, and dual-band photodetectors, are listed in this minireview. Meanwhile, the current bottleneck and future development prospects of the photodetector are discussed.

Stimulated Brillouin scattering (SBS) lasers based on silicon waveguides with large SBS gain have been widely used in frequency tunable laser emissions, mode-locked pulse lasers, low-noise oscillators, optical gyroscopes and other fields. However, among SBS lasers, the realization of Brillouin laser output often requires a longer waveguide length, which not only increases waveguide loss but also increase the size of the device. As a new medium, lithium niobate has been fabricated into a new type of hybrid structure. Meanwhile, the width of a suspended waveguide is adjusted to tune the phonon frequency of an SBS laser based on lithium niobate substrate. Simulation results show that the tunable forward SBS effect is realized in a lithium niobate-suspended optical waveguide, showing a larger forward stimulated Brillouin scattering gain of 0.31 W⁻¹m⁻¹. The tunable phonon frequency ranges from 1 to 15 GHz. Therefore, utilizing the photon–phonon conversion effect, the waveguide system with LiNbO₃ will pave a new way forward with better integration.

Infrared lasers have an extensive range of applications in sensing, detection, communication, medicine, and other fields. The principle of directly pumping solid-state lasers is simple, and it can easily achieve high-power and high-efficiency laser output, which is one of the important means to obtain infrared lasers. Incorporating rare earth ions into the substrate as the gain medium for directly pumping solid-state lasers can alter their optical performance and further enhance the performance of the laser. Lasers based on rare earth ion doping have a small volume, high conversion efficiency, good beam quality, wide tuning range, and multiple operating modes. Therefore, the proportion of rare earth ions doped as the gain medium for activating ions is currently very large. In this review, Ho³⁺, Tm³⁺, and Er³⁺ are selected as the representative rare earth ions, and their optical properties, such as luminous power and fluorescence lifetime, when doped in different substrates, such as crystals, ceramics, and fibers, are introduced, respectively, to illustrate their feasibility as infrared laser gain media. In addition, we show the different optical properties when doped with two ions, three ions, and four ions, demonstrating their great potential as infrared laser gain media.

An optical waveguide is the basic structure of quantum optics, which has a strong confinement effect on light. It can complete the low-loss transmission of light and the enhancement of the nonlinear effect. Direct writing of optical waveguide structures in transparent crystals can enhance the electro-optic, acousto-optic, and nonlinear optical properties of crystals, making them widely used in the optical field. Femtosecond laser direct writing technology is a non-contact processing technology without thermal damage. The direct writing accuracy is high, and it is easy to fabricate the three-dimensional optical waveguide structure in the crystal. It is the best choice of a direct writing optical waveguide structure in a transparent crystal. This paper reviews the recent progress of femtosecond laser direct writing of transparent crystal materials to form optical waveguide structures. The basic mechanism of optical waveguide fabrication by femtosecond laser direct writing in transparent crystal, the methods of waveguide fabrication combined with different techniques, and the obtained optical waveguide structures are introduced, including single-line waveguides, double-line waveguides, depressed-cladding waveguides, ridge waveguides, and photonic crystal waveguides. The applications of optical waveguide structures in lasers, quantum memories, and quantum telecommunication devices are also presented.

Lasers are increasingly used in the biomedical field because of their concentrated energy, good stability, ease of use, and other advantages, promoting the development of precision medicine to a higher level. Medical laser equipment has transformed from a single therapeutic tool in an intelligent and precise diagnostic system. Existing clinical laser equipment has significant technical bottlenecks regarding soft-tissue ablation precision and multimodal diagnostic compatibility, which seriously restricts its clinical application. High-power thulium-doped fiber lasers with operating wavelengths of 1.9–2.1 μm provide a revolutionary solution for minimally invasive surgery due to their high compatibility with the absorption peaks of water molecules in biological tissues. This study reviews recent advances in high-power thulium-doped fiber lasers for minimally invasive therapies in the biomedical field. Breakthrough results in four major clinical application scenarios, namely, urological lithotripsy, tumor precision ablation, disfiguring dermatological treatment, and minimally invasive endovenous laser ablation, are also summarized. By systematically evaluating its potential for multimodal diagnostic and therapeutic applications and thoroughly exploring the technical challenges and strategies for clinical transformation, we aim to provide a theoretical basis and practical guidance for the clinical transformation and industrialization of new-generation medical laser technology.