Predicting the nonlinear torsional stiffness of harmonic drives is important not only for system control but also for the further development of the drive. However, it is difficult to predict the torsional stiffness because of the elastic deformation of the flexspline and the many contacts involved. Furthermore, nonlinear dynamic contact simulations between the elastic components of the harmonic drive are disadvantaged by high computational burden and convergence problems. To address these challenges, we establish a flexible multibody modeling process using augmented formulations of a floating reference frame to simulate the operation of the harmonic drive. The elastic deformation of the flexspline and the dynamic contacts between the main components are considered in the reproduction of the contact mechanism of the drive. Coordinate reduction techniques are used to properly replicate an elastic shaft, enabling the effective simulation of flexible multibody dynamics, including nonlinear elastic tooth contact analysis. The performance of the proposed modeling process is evaluated using catalog and experimental data on two types of standard harmonic drives (SHG-25-100-UH and SHG-40-100-UH). The hysteresis curve is predicted through flexible multibody dynamics simulation and the accuracy of parameters of torsional stiffness is approximately 91.7% on average. The proposed modeling method can be improved to predict other measures of performance and it remains a potential research topic.
20 November 2024 in IEEE/ASME Transactions on Mechatronics
To advance research and industrial applications of robotic systems, enhancing object manipulation capabilities is crucial. This study introduces the INDEX gripper, an industrial dexterous robotic gripper designed to efficiently grasp objects of various shapes and precisely manipulate their orientations. The gripper features a 3-finger, 9-degree-of-freedom (DOF) linkage-driven mechanism. Its kinematic structure incorporates four four-bar linkages, enabling active 3-DOF motion for each finger. Developed through kinematic analysis, the INDEX gripper is capable of performing multiple grasping postures and accurately manipulating objects in all orientations within its grasp. Experimental results demonstrated a maximum fingertip force of 40.6 N, a payload capacity of 12.2 kg, and a repeatability error of less than 0.0244 mm. The gripper successfully grasped 15 objects of different shapes and manipulated a spherical object by 27.6 $^\circ$ along the x -axis, 34.2 $^\circ$ along the y -axis, and 98.3 $^\circ$ along the z -axis. In addition, the gripper was tested in two industrial tasks: installing a light bulb and performing a bolting process using a driver. These tasks validated the gripper's effectiveness and reliability in industrial applications.
We establish a robust algorithm to analyze the influence of system uncertainties on the transmission error of a spur gear pair under 2D simplification. The algorithm provides a way of generating smooth cutter profiles with machining uncertainties and measuring the thermal deformation through the uncertainties in material properties. Then, it produces realizations of gear tooth profiles based on the analytical method for accuracy and computational efficiency. Numerical investigations show the statistical analysis on the tooth contact analysis by comparing steel and plastic gears. It is worthwhile remarking that the plastic gear is susceptible to the geometric error caused by thermal deformation. Moreover, although the impact of thermal deformation on steel gear may seem slim, it can have a noticeable influence when it exists with mechanical uncertainties together.
Direct-drive robot arms, often utilized in manipulators and humanoid robots, face challenges related to increased distal mass and reduced backdrivability due to motors being placed at each joint. This paper presents a 4-DOF elbow-wrist mechanism for a robot arm driven by wires. The design includes the upper arm, elbow, upper forearm, lower forearm, and wrist, with all actuators concentrated in the upper arm to minimize distal mass. To achieve this, the mechanism employs rolling-contact joints, forearm rotator idlers, and agonist-antagonist wire pairs. Additionally, a differential mechanism is integrated at the wrist, allowing for yaw rotation at the forearm while enabling roll and pitch rotations at a single point, thereby eliminating inter-axis offset and mimicking human wrist motion. A prototype was fabricated and evaluated, achieving an elbow flexion of 107°, forearm yaw exceeding 90° in both directions, wrist roll of 63° and 50° in each direction, and wrist pitch of 33° in both directions. The independence of each degree of freedom was validated, and torque efficiency from the upper arm to the wrist tip was measured and analyzed.