14 August 2024 in Science Robotics
Wheels have been commonly used for locomotion in mobile robots and transportation systems because of their simple structure and energy efficiency. However, the performance of wheels in overcoming obstacles is limited compared with their advantages in driving on normal flat ground. Here, we present a variable-stiffness wheel inspired by the surface tension of a liquid droplet. In a liquid droplet, as the cohesive force of the outermost liquid molecules increases, the net force pulling the liquid molecules inward also increases. This leads to high surface tension, resulting in the liquid droplet reverting to a circular shape from its distorted shape induced by gravitational forces. Similarly, the shape and stiffness of a wheel were controlled by changing the traction force at the outermost smart chain block. As the tension of the wire spokes connected to each chain block increased, the wheel characteristics reflected those of a general circular-rigid wheel, which has an advantage in high-speed locomotion on normal flat ground. Conversely, the modulus of the wheel decreased as the tension of the wire spoke decreased, and the wheel was easily deformed according to the shape of obstacles. This makes the wheel suitable for overcoming obstacles without requiring complex control or sensing systems. On the basis of this mechanism, a wheel was applied to a two-wheeled wheelchair system weighing 120 kilograms, and the state transition between a circular high-modulus state and a deformable low-modulus state was realized in real time when the wheelchair was driven in an outdoor environment.
26 August 2022 in IEEE/ASME Transactions on Mechatronics
Predicting the nonlinear torsional stiffness of harmonic drives is important not only for system control but also for the further development of the drive. However, it is difficult to predict the torsional stiffness because of the elastic deformation of the flexspline and the many contacts involved. Furthermore, nonlinear dynamic contact simulations between the elastic components of the harmonic drive are disadvantaged by high computational burden and convergence problems. To address these challenges, we establish a flexible multibody modeling process using augmented formulations of a floating reference frame to simulate the operation of the harmonic drive. The elastic deformation of the flexspline and the dynamic contacts between the main components are considered in the reproduction of the contact mechanism of the drive. Coordinate reduction techniques are used to properly replicate an elastic shaft, enabling the effective simulation of flexible multibody dynamics, including nonlinear elastic tooth contact analysis. The performance of the proposed modeling process is evaluated using catalog and experimental data on two types of standard harmonic drives (SHG-25-100-UH and SHG-40-100-UH). The hysteresis curve is predicted through flexible multibody dynamics simulation and the accuracy of parameters of torsional stiffness is approximately 91.7% on average. The proposed modeling method can be improved to predict other measures of performance and it remains a potential research topic.
25 October 2024 in IEEE Transactions on Industrial Electronics
In this article, a tactile sensor integrated into the fingertip of a robotic gripper was proposed for delicate object manipulation. The sensor was designed to measure both the precise concentrated contact force and the distributed force, enabling in-hand manipulation of robotic grippers. The surface of the fingertip has an inverse-truncated cone-shaped structure. A sensing method was developed to detect the distributed force and precise contact force location through theoretical analysis and simulation of the kinematic relationship between the inverse-truncated cone-shaped surface and the capacitance sensor. In addition, a significant advantage of this sensor lies in its suitability for robotic integration, which is achieved by minimizing the complexity of the measurement electronics. Furthermore, it is easy to manufacture, resulting in cost-effective production. Through several experimental setups, the performance of distributed force sensing and concentrated contact force sensing was evaluated by achieving a maximum force range of 30 N, an average repeatability error of 1.28% of the FSO, and a resolution of 6 mN in that force range. Furthermore, the developed sensor was integrated into a robotic gripper, and its applicability was verified through object-grasping tests.
20 November 2024 in IEEE/ASME Transactions on Mechatronics
To advance research and industrial applications of robotic systems, enhancing object manipulation capabilities is crucial. This study introduces the INDEX gripper, an industrial dexterous robotic gripper designed to efficiently grasp objects of various shapes and precisely manipulate their orientations. The gripper features a 3-finger, 9-degree-of-freedom (DOF) linkage-driven mechanism. Its kinematic structure incorporates four four-bar linkages, enabling active 3-DOF motion for each finger. Developed through kinematic analysis, the INDEX gripper is capable of performing multiple grasping postures and accurately manipulating objects in all orientations within its grasp. Experimental results demonstrated a maximum fingertip force of 40.6 N, a payload capacity of 12.2 kg, and a repeatability error of less than 0.0244 mm. The gripper successfully grasped 15 objects of different shapes and manipulated a spherical object by 27.6 $^\circ$ along the x -axis, 34.2 $^\circ$ along the y -axis, and 98.3 $^\circ$ along the z -axis. In addition, the gripper was tested in two industrial tasks: installing a light bulb and performing a bolting process using a driver. These tasks validated the gripper's effectiveness and reliability in industrial applications.
27 February 2024 in IEEE Access
Stair climbing is necessary to improve the convenience of electric wheelchairs. An important issue in developing a climbable wheelchair is stability and speed during climbing. In this work, tri-wheel and supporting leg were adopted in the stair climbing method for high speed and stable posture. Based on the mechanical and static analyses of the climbing mechanism, the design method of the wheel cluster system was expressed as equations. These equations were proposed considering the design parameters that ensure the continuity and stability of the climbing motion. Moreover, the collision information between the stairs and the cluster system during the climbing motion was included in those equations. A validation test of the stair climbing mechanism was performed by manufacturing a prototype of 750 ( W ) x 800( D ) x 1,000( H ) mm 3 and 120 kg . The experimental verification proved that the electric wheelchair can stably go up and down the stairs under extreme conditions (stair width = 300 mm , stair height = 180 mm ) at a speed of 10 steps/min.