Malte Schmidt

Mr. Malte Schmidt


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2014 in The Journal of Physical Chemistry C
Verified
Journal Article
Open access
MAMahdieh Aghamohammadi
Mahdieh Aghamohammadi
AFAnton Fernández
Anton Fernández
MSMalte Schmidt
Malte Schmidt
ARAna Pérez Rodríguez
Ana Pérez Rodríguez
AGAlejandro Rodolfo Goñi
Alejandro Rodolfo Goñi
EBEsther Barrena
Esther Barrena
We address the impact of the relative orientation between donor (D) and acceptor (A) molecules at the D/A heterojunction on the exciton dissociation. For this purpose, two-dimensional heterojunctions of diindenoperylene (DIP) and N,N'-dioctyl-3,4,9,10-perylene tetracarboxylicdiimide (PTCDI-C8) deposited onto SiO2/Si are grown, which exemplify two model interfaces with the π-staking direction either perpendicular or parallel to the interface. Aspects related to the morphology of the heterojunctions and charge photogeneration are studied by scanning probe force methods and photoluminescence (PL) spectroscopy. Results from PL spectroscopy indicate that the exciton dissociation is influenced by the different relative molecular orientations of A and D. For the configuration with stronger orbital overlap between A and D at the interface, the exciton dissociation is dominated by recombination from an interfacial charge-transfer state.Financial support by the Spanish Government (projects MAT2010-20020 and NANOSELECT CSD2007-00041) and by the German Research Foundation (DFG) within the priority program SPP1355 is acknowledged.Peer Reviewe

6 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
MSMalte Schmidt
Malte Schmidt
PHPhilipp Huke
Philipp Huke
Christoph GerhardChristoph Gerhard
Christoph Gerhard
KPKnut Partes
Knut Partes
Direct metal deposition (DMD) can be used for the cladding of surfaces as well as repairing and additive manufacturing of parts and features. Process monitoring and control methods ensure a consistent quality during manufacturing. Monitoring by optical emission spectroscopy of the process radiation can provide information on process conditions and the deposition layer. The object of this work is to measure optical emissions from the process using a spectrometer and identify element lines within the spectra. Single spectra have been recorded from the process. Single tracks of Co-based powder (MetcoClad21) were clad on an S235 base material. The influence of varying process parameters on the incidence and intensity of element lines has been investigated. Moreover, the interactions between the laser beam, powder jet, and substrate with regard to spectral emissions have been examined individually. The results showed that element lines do not occur regularly. Therefore, single spectra are sorted into spectra including element lines (type A) and those not including element lines (type B). Furthermore, only non-ionised elements could be detected, with chromium appearing frequently. It was shown that increasing the laser power increases the incidence of type A spectra and the intensity of specific Cr I lines. Moreover, element lines only occurred frequently during the interaction of the laser beam with the melt pool of the deposition layer.

17 January 2023 in Lasers in Manufacturing and Materials Processing
Verified
Journal Article
Open access
PDF file
MSMalte Schmidt
Malte Schmidt
RKRobert Köhler
Robert Köhler
Christoph GerhardChristoph Gerhard
Christoph Gerhard
KPKnut Partes
Knut Partes
For Directed Energy Deposition processes (DED) lasers in the near infrared (NIR) as well as in the infrared (IR) range are predominantly used. Recent developments have also made high-power lasers in the visible spectrum available. As the DED process is used for cladding of surfaces, repairing and additive manufacturing of components, process monitoring and control methods are necessary to ensure a consistent manufacturing quality. Optical emission spectroscopy (OES) of the process radiation can provide information on process conditions and the deposition layer during DED processes. However, DED processes are in the heat conduction regime and superimposed broad spectral emissions dominate the wavelength specific signals. The object of this work is to compare the process behavior using a NIR and blue diode laser separately as well as in combination. The influence of the laser wavelength on the cladding result as well as on the emitted process radiation is to be determined. Therefore, single tracks of Co-based powder (MetcoClad21) were clad on an S235 base material by using each laser source separately as well as in combination. Both laser beams were combined within a single hybrid optic. While the scan speed and powder feed rate remained constant, the laser power was varied. Single spectra have been recorded from the process using a spectrometer. Single spectra are sorted and element lines were identified. Only non-ionised elements could be detected, with chromium appearing frequently. It was shown that comparable results in terms of cladding quality can be produced independently from the laser wavelength. In fact, less laser power (app. 30% less, 1 kW at 980 nm (NIR) compared to 0.7 kW at 450 nm (blue)) was needed aiming for comparable results in geometrical factors (as dilution, height, depth, width) and homogeneity (chemical composition distribution) by using blue laser irradiation. Furthermore, more spectrometric signals (approx. 2–28 times more) were detected compared to experiments using only NIR irradiation with the same laser power. This effect is particularly high at low laser powers and decreases with increasing power. Hence, it is possible to enable in-line process analysis by adding blue laser irradiation to the mix of the beam.

1 November 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
MSMalte Schmidt
Malte Schmidt
KPKnut Partes
Knut Partes
RRRohan Rajput
Rohan Rajput
GPGiorgi Phochkhua
Giorgi Phochkhua
HKHenry Köhler
Henry Köhler
Controlling heat transfer in casting tools is a key quality aspect. It can be improved by selectively applying volumetric aluminum bronze (CuAl9.5Fe1.2) sections in the core of the tools and subsequently depositing these cores with hard-facing H13 tool steel. Directed energy deposition (DED) can be used for both additive manufacturing of aluminum bronze and hard-facing by depositing the filler material onto a substrate surface or previously manufactured bodies. A sufficient metallurgical bonding of the deposited filler material and the underlying layer must be ensured. Hence, the dilution is a key factor for quality assurance. However, high dilution of the underlying layer and the filler material negatively affects the desired properties and must be monitored. Optical emission spectroscopy of the DED process emissions is investigated by comparing the emission lines of the individual elements comprising the base and the filler materials. Multiple single tracks using aluminum bronze as the filler material are laser-cladded with varying power, onto the two different types of substrates, i.e., mild steel S355 (1.0570) and hot working tool steel H11 (1.2343). Additionally, single tracks of H13 (1.2344) are deposited with varying laser powers onto an additively manufactured core of aluminum bronze. Both resulting in deposition tracks with varying dilution values. Multiple emission lines of Cr, Fe, Cu, Al, and Mn are detected and measured (line intensity). Line intensity ratios using the element emission lines are calculated and correlated with the respective metallographic results of the deposition tracks (dilution and chemical composition). Deposition tracks with a higher dilution (CuAl9.5Fe1.2 onto S355/H11 as well as H13 onto CuAl9.5Fe1.2) showed an increased line intensity ratio of the underlying material to the filler material. Moreover, this technology was transferred in a multilayer industrial application.

7 December 2022 in Journal of Thermal Spray Technology
Verified
Journal Article
Open access
PDF file
MSMalte Schmidt
Malte Schmidt
SGSven Gorny
Sven Gorny
NRNick Rüssmeier
Nick Rüssmeier
KPKnut Partes
Knut Partes
Process monitoring and control methods during direct metal deposition (DMD) ensure consistent manufacturing quality of the product. Naturally occurring optical process emissions provide selective and specific element lines, which can be investigated by optical spectrometers. However, DMD processes are mainly characterized by thermal conduction. Hence, the resulting optical emission lines have low intensities. The aim of this work is to investigate the spectral lines and determine the required resolution of the spectrometer. Two spectrometers coupled by a bifurcated optical fiber were used simultaneously (resolution = approx. 47 pm FWHM at 522 nm and 55 pm FWHM at 407.5 nm and resolution = 0.73 nm FWHM). A parameter study with varying process parameters using Co-Cr-based (MetcoClad21) powder on low-alloyed tool steel C45W (1.1730) substrate material was conducted. Peaks occurring in spectral data were assigned to specific element emission lines by using data from the NIST atomic spectra database. All identified element lines were non-ionized elements. Cr I, Fe I and Mn I lines in particular were frequently observed. The occurrence of element emission lines as well as the peak intensity ratios for specific elements was compared with the cross-sectional dimensions including height, weld depth and dilution. It has been shown that the occurrence and intensity of emission lines correlate with the process parameters, especially the laser power. Furthermore, the dilution of a deposition track correlates with the occurrence and intensity of an identified Fe I emission line, represented by a Fe-Cr peak intensity ratio.

20 September 2024 in Optics & Laser Technology
Verified
Journal Article
Open access
MSMalte Schmidt
Malte Schmidt
HNHimani Naesstroem
Himani Naesstroem
JVJörg Volpp
Jörg Volpp
KPKnut Partes
Knut Partes