A frequency selective surface for spatial filtering in the standardized Ultra-Wide Band (UWB) frequency range is proposed. A very large stop-band of 1.75–15.44 GHz has been obtained, with good polarization insensitivity and an angular stability of more than 60 and more than 50 in TE and TM incidence, respectively. Circuit models have been devised. The structure has been assessed by electromagnetic simulation and implemented on an FR4 substrate of 1.6 mm thickness, with an edge of the square-shaped unit cell of 15 mm. Tests in an anechoic chamber demonstrated good matching between simulation and experimental results and proper operation of the device.
Tunable/switchable devices are more and more required in modern communication systems. However, the realization of the tuning requires the presence of active devices, which in turn must be biased. The current paper comes up with a solution for designing and experimentally validating such a switchable Frequency Selective Surface. Two different metallic structures are simulated and measured, having incorporated the same topology control network (CN). In this scenario, the main innovation of this paper is the presence of the feeding part, namely the control network. In this work, the main FSS structure is flanked by three parallel CN microstrip lines and several via holes that allow biasing the active elements, namely PIN diodes. The switchability of the proposed structure is achieved through PIN diodes, whose bias determines the values of the elements in the equivalent circuit. At different biases, the response of the FSS changes accordingly. From all possible values of the bias, the extreme cases when the diodes act as (almost) short- and open-circuits are considered in the submitted manuscript for the sake of brevity. These cases are modeled by the main and cut-slot structures, respectively. The proposed structures have been evaluated using electromagnetic simulation and implemented on an FR4 substrate having a thickness of 1.58 mm. With the periodicity of the square-shaped unit cell of 18 mm edge length, different filtering bands are obtained below 12 GHz. Another novelty that has received very little consideration in the existing literature is the use of a finite array of unit cells instead of an infinite one. And finally, tests in an anechoic chamber have proved that there is a good agreement between practical and simulation results and also demonstrated the proper performance of the devices for wide angular incidence for both TE and TM polarizations.
A single metal layer, multifunctional frequency selective surface with a very simple pattern of the unit cell, containing a U-shaped metal resonator on FR4 substrate, and working in the low GHz frequency range is proposed. The structure realizes dual linear polarization filtering at frequencies of 1.83 and 4.14 GHz with fractional bandwidths of 34.15% and 22.51% respectively, and linear-to-circular polarization conversion at 2.68 GHz, with 3.2 dB insertion loss (IL), 30-45° angular stability depending on the direction of arrival of the incident wave, and 22.01% axial ratio bandwidth. The dimension of the unit cell corresponds to 0.09, 0.13 and 0.21 fractions of wavelength at the three operational frequencies. The functionality of the proposed structure is assessed by simulation, circuital model, and experiment in anechoic chamber. Scalability is demonstrated by designs that work at different frequencies, tested by simulation.
Breast cancer histopathological classification remains a challenging task due to small patch resolution, staining inconsistencies, magnification variability, and class imbalance in datasets such as BreakHis and IDC, which hinder accurate malignancy detection. This paper proposes AttFKAN-DEQ, a novel framework that integrates Fourier Kolmogorov-Arnold Networks (FKANs) with Deep Equilibrium Models (DEQs) for binary benign-versus-malignant classification. Unlike spline-based formulations, FKANs model univariate edge functions using finite trigonometric series with trainable sine and cosine coefficients, enabling robust multi-scale spectral representations of heterogeneous tissue morphology. To enhance feature discrimination, a Lightweight Convolutional Block Attention Module (LCBAM) is incorporated within the FKAN residual block to perform channel-wise and spatial feature recalibration during each DEQ iteration using depthwise separable convolutions. This mechanism emphasizes diagnostically relevant regions while suppressing irrelevant background variations. Furthermore, the DEQ mechanism implicitly models infinite network depth through fixed-point iterations at constant memory cost, allowing stable and progressive latent feature refinement. The proposed framework was evaluated using five-fold stratified cross-validation with standard data augmentation. AttFKAN-DEQ achieved 96.60% accuracy and 98.44% AUC on the BreakHis dataset and 94.52% accuracy with 97.31% AUC on the IDC dataset. Experimental results demonstrate that the proposed model outperforms DEQ-KAN, ResNet variants, DenseNet-121, EfficientNet-B0, Vision Transformer, Swin Transformer, ConvNeXt, and MobileViT across multiple evaluation metrics. Ablation studies further confirm the individual and combined contributions of Fourier parameterization, lightweight attention, and equilibrium-based feature refinement to the overall performance. Despite containing only 6.0M parameters and requiring 0.60 GFLOPs, AttFKAN-DEQ achieves high diagnostic accuracy with strong computational efficiency, highlighting its potential for deployment in real-world clinical histopathology applications.
This paper presents a new SiGe HBT-based high dynamic range double-balanced down-conversion differential mixer. Operating within the 0.5 GHz to 1.8 GHz range, the suggested mixer is appropriate for a variety of applications, such as cellular base stations, satellite communication (SATCOM), and military radar. The down-conversion mixer is made up of a single-ended to a differential-balanced radiofrequency (RF) stage, a dual feedback linearization for the RF stage, a local oscillator (LO) balun, LO mixing cores, and a fixed intermediate frequency (IF)-tuned circuit connected between two outputs to serve as a load at 145 MHz. Compared to earlier research in the literature, the measured SSB noise figure is approximately 7 dB ± 0.4 dB, and the measured conversion gain is approximately 12 dB ± 1 dB for a full band of operation. The mixer achieves a good return loss of over 8 dB for an RF and LO port in the desired band and a measured return loss of over 18 dB at 145 MHz and IF frequency. Furthermore, the design achieved an RF-to-IF isolation of greater than 35 dB, LO feedthrough, and an LO leakage isolation of better than 50 dB. Lastly, the measured third-order intercept point was found to be +4.7 dBm, and the 1 dB compression point was approximately −8 dBm. These results demonstrate good linearity performance.
Screening applications of a frequency selective surface (FSS) built on a FR4 substrate with two metal periodic patterns are reported. The square shaped unit cell contains a Jerusalem Cross (J cross) metal pattern on one face and a circular ring one on the other. Broadband, X band and WLAN filters are proposed and assessed for TE and TM plane wave incidence up to an angle of 45 ° The operation of the FSS is demonstrated by computer simulation. Two commercial solvers are used to verify the consistency of the results.