A frequency selective surface for spatial filtering in the standardized Ultra-Wide Band (UWB) frequency range is proposed. A very large stop-band of 1.75–15.44 GHz has been obtained, with good polarization insensitivity and an angular stability of more than 60 and more than 50 in TE and TM incidence, respectively. Circuit models have been devised. The structure has been assessed by electromagnetic simulation and implemented on an FR4 substrate of 1.6 mm thickness, with an edge of the square-shaped unit cell of 15 mm. Tests in an anechoic chamber demonstrated good matching between simulation and experimental results and proper operation of the device.
The radiated emissions (RE) measurement is one of the tests that are mandatory in a full qualification stage in order to validate an electronic or electric product for series production. The purpose of this paper is to present a near-field scan technique for mitigating RE levels in order to reduce the time to market for the product. The magnetic near-field data are measured by using an EHX+ system from EMSCAN and the results are validated with the far-field measurements data obtained in a semi-anechoic chamber. Acquired data are used for finding a solution to mitigate the emissions in radiated emissions testing in order to pass the limits imposed by the OEM (Original Equipment Manufacturer).
6 October 2011 in IEEE Antennas and Wireless Propagation Letters
The effect of the biasing network (BN), formed by coplanar transmission lines (CPWs) built into the ground plane itself, on the dispersion characteristics of a tunable unit cell (UC) is investigated. The UC consists of an elliptical patch and multiple vias placed inside a parallel plate waveguide. One of the vias attached to a patch positioned on the top surface of a dielectric substrate connects the patch to the ground plane. Another via, symmetrically positioned with respect to the patch center, can be connected to the same ground plane or let to float depending on the state of a diode positioned at its base. The effect of the different components of the BN is analyzed step by step. For each intermediate configuration, the corresponding dispersion diagram (DD) is computed, allowing extraction of fundamental information on the influence of each part of the CPW circuit on the band-gap characteristics. The orientation of the BN is also discussed. The presented results can guide the dispersion engineering process when a tunable electromagnetic band-gap (EBG) structure is designed for a specific guided-wave application.
The problem of intermodulation distortions introduced by ferromagnetic materials inclusions in the construction of equipment used for transmission and processing of GSM signals is addressed. A Rayleigh model is implemented for determination of the response of ferromagnetic materials to two-tone signals. Results of experiments performed on coaxial transmission lines built with ferromagnetic materials and fed with two-tone signals are reported and compared to the predictions of the models.
We study the Doppler shift in the frequency of an acoustic or light wave emitted by a source at rest with respect to an inertial reference frame and received by an accelerated observer, and the same problem for a light wave emitted by an accelerated source and received by an inertial observer. The non-locality in the frequency measurement by an accelerating observer is taken into account, noting that two successive zeros of the wave are received at two different points in space, where the velocities of the receiver or source are different.
6 August 2012 in Journal of Electromagnetic Waves and Applications
We introduce a novel structure of inhomogeneous parallel plate waveguide suitable for advanced applications requiring frequency tunability. The structure relies on microstrip technology and consists of a periodic metallic lattice embedded in dielectric materials. The basic metal pattern is connected to the upper layer by a metallic post in each unit cell, and can be in the same time selectively connected to the lower metallic plane through two vias. The presence or absence of the connection is determined by the states of two incorporated diodes. The frequency characteristics of the structure can be changed through a cost effective, two-way DC supplier, which sets the states of the two diodes positioned across two slots, which in turn avoid short-circuit between the two closing planes. The biasing network as a source of generation of spurious noise is completely eliminated since the control voltage is applied through the existing metal walls of the structure.