With the continuous progress of modern industry, rotating machinery is gradually developing toward complexity and intelligence. The fault diagnosis technology of rotating machinery is one of the key means to ensure the normal operation of equipment and safe production, which has very important significance. Deep learning is a useful tool for analyzing and processing big data, which has been widely used in various fields. After a brief review of early fault diagnosis methods, this paper focuses on the method models that are widely used in deep learning: deep belief networks (DBN), autoencoders (AE), convolutional neural networks (CNN), recurrent neural networks (RNN), generative adversarial networks (GAN), and transfer learning methods are summarized from the two aspects of principle and application in the field of fault diagnosis of rotating machinery. Then, the commonly used evaluation indicators used to evaluate the performance of rotating machinery fault diagnosis methods are summarized. Finally, according to the current research status in the field of rotating machinery fault diagnosis, the current problems and possible future development and research trends are discussed.
Rolling bearings are a vital component of mechanical equipment. It is crucial to implement rolling bearing fault diagnosis research to guarantee the stability of the long-term action of mechanical equipment. Conversion of rolling bearing vibration signals into images for fault diagnosis research has been a practical diagnostic approach. The current paper presents a rolling bearing fault diagnosis method using symmetrized dot pattern (SDP) images and a deep residual network with convolutional block attention module (CBAM-DRN). The rolling bearing vibration signal is first visualized and transformed into an SDP image with distinct fault characteristics. Then, CBAM-DRN is utilized to derive characteristics directly and detect faults from the input SDP images. In order to prevent conventional time-frequency images from being limited by their inherent flaws and avoid missing the fault features, the SDP technique is employed to convert vibration signals into images for visualization. DRN enables adequate extraction of rolling bearing fault characteristics and prevents training difficulties and gradient vanishing in deep level networks. CBAM assists the diagnostic model in concentrating on the image’s more distinctive parts and preventing the interference of non-featured parts. Finally, the method’s validity was tested with a composite fault dataset of motor bearings containing multiple loads and fault diameters. The experimental results reflect that the presented approach can attain a diagnostic precision of over 99% and good stability and generalization.
Rolling bearings are crucial parts of primary mine fans. In order to guarantee the safety of coal mine production, primary mine fans commonly work during regular operation and are immediately shut down for repair in case of failure. This causes the sample imbalance phenomenon in fault diagnosis (FD), i.e., there are many more normal state samples than faulty ones, seriously affecting the precision of FD. Therefore, the current study presents an FD approach for the rolling bearings of primary mine fans under sample imbalance conditions via symmetrized dot pattern (SDP) images, denoising diffusion probabilistic models (DDPMs), the image generation method, and a convolutional neural network (CNN). First, the 1D bearing vibration signal was transformed into an SDP image with significant characteristics, and the DDPM was employed to create a generated image with similar feature distributions to the real fault image of the minority class. Then, the generated images were supplemented into the imbalanced dataset for data augmentation to balance the minority class samples with the majority ones. Finally, a CNN was utilized as a fault diagnosis model to identify and detect the rolling bearings’ operating conditions. In order to assess the efficiency of the presented method, experiments were performed using the regular rolling bearing dataset and primary mine fan rolling bearing data under actual operating situations. The experimental results indicate that the presented method can more efficiently fit the real image samples’ feature distribution and generate image samples with higher similarity than other commonly used methods. Moreover, the diagnostic precision of the FD model can be effectively enhanced by gradually expanding and enhancing the unbalanced dataset.
Permanent magnet coupling is extensively studied owing to its economic efficiency and stability. In this study, a computational model for cylindrical permanent magnet coupling (CPMC) was designed using the magnetic field division method to divide an air gap magnetic field. An equivalent magnetic circuit model was also designed based on the equivalent magnetic circuit method. The novelty of this study is that both the skin effect and the working point of the permanent magnet are taken into consideration to obtain the magnetic circuit and induce eddy current characteristics of permanent magnet coupling. Furthermore, a computational model was obtained for the transmission torque of the CPMC based on the principles of Faraday’s and Ampere’s laws. Additionally, the accuracy of the model was verified using a finite element simulation model and a test bench.
Bearings are key transmission parts that are extensively used in rolling mechanical and equipment. Bearing failures can affect the regular running of machines, in serious cases, can cause enormous losses in economy and personnel casualties. Therefore, it is important to implement the research of diagnosing bearing faults. In this paper, a bearing faults diagnosis method was developed based on multiple image inputs and deep convolutional neural network. Firstly, the 1-Dvibration signal is transformed into three different types of two-dimensional images: time-frequency image, vibration grayscale image and symmetry dot pattern image, respectively. Enter them into multiple DCNNs separately. Finally, Finally, the nonlinear features of multiple DCNN outputs are fused and classified to achieve bearing fault diagnostics. The experimental results indicate that the diagnosis accuracy of this proposed method is 98.8%, it can extract the fault features of vibration samples well, and it is an effective bearing fault diagnosis methodology.