Aiming Wang

Dr. Aiming Wang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 December 2022 in Sensors
Verified
Journal Article
Open access
PDF file
WCWei Cui
Wei Cui
GMGuoying Meng
Guoying Meng
TGTingxi Gou
Tingxi Gou
AWAiming Wang
Aiming Wang
芮肖芮 肖
芮 肖
XZXinge Zhang
Xinge Zhang
Rolling bearings are a vital component of mechanical equipment. It is crucial to implement rolling bearing fault diagnosis research to guarantee the stability of the long-term action of mechanical equipment. Conversion of rolling bearing vibration signals into images for fault diagnosis research has been a practical diagnostic approach. The current paper presents a rolling bearing fault diagnosis method using symmetrized dot pattern (SDP) images and a deep residual network with convolutional block attention module (CBAM-DRN). The rolling bearing vibration signal is first visualized and transformed into an SDP image with distinct fault characteristics. Then, CBAM-DRN is utilized to derive characteristics directly and detect faults from the input SDP images. In order to prevent conventional time-frequency images from being limited by their inherent flaws and avoid missing the fault features, the SDP technique is employed to convert vibration signals into images for visualization. DRN enables adequate extraction of rolling bearing fault characteristics and prevents training difficulties and gradient vanishing in deep level networks. CBAM assists the diagnostic model in concentrating on the image’s more distinctive parts and preventing the interference of non-featured parts. Finally, the method’s validity was tested with a composite fault dataset of motor bearings containing multiple loads and fault diameters. The experimental results reflect that the presented approach can attain a diagnostic precision of over 99% and good stability and generalization.

18 August 2023 in Entropy
Verified
Journal Article
Open access
PDF file
WCWei Cui
Wei Cui
JDJun Ding
Jun Ding
GMGuoying Meng
Guoying Meng
ZLZhengyan Lv
Zhengyan Lv
YFYahui Feng
Yahui Feng
XWXingwei Wan
Xingwei Wan
Rolling bearings are crucial parts of primary mine fans. In order to guarantee the safety of coal mine production, primary mine fans commonly work during regular operation and are immediately shut down for repair in case of failure. This causes the sample imbalance phenomenon in fault diagnosis (FD), i.e., there are many more normal state samples than faulty ones, seriously affecting the precision of FD. Therefore, the current study presents an FD approach for the rolling bearings of primary mine fans under sample imbalance conditions via symmetrized dot pattern (SDP) images, denoising diffusion probabilistic models (DDPMs), the image generation method, and a convolutional neural network (CNN). First, the 1D bearing vibration signal was transformed into an SDP image with significant characteristics, and the DDPM was employed to create a generated image with similar feature distributions to the real fault image of the minority class. Then, the generated images were supplemented into the imbalanced dataset for data augmentation to balance the minority class samples with the majority ones. Finally, a CNN was utilized as a fault diagnosis model to identify and detect the rolling bearings’ operating conditions. In order to assess the efficiency of the presented method, experiments were performed using the regular rolling bearing dataset and primary mine fan rolling bearing data under actual operating situations. The experimental results indicate that the presented method can more efficiently fit the real image samples’ feature distribution and generate image samples with higher similarity than other commonly used methods. Moreover, the diagnostic precision of the FD model can be effectively enhanced by gradually expanding and enhancing the unbalanced dataset.

7 August 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YLYue Liu
Yue Liu
GMGuoying Meng
Guoying Meng
Shuangfu joseph SuoShuangfu joseph Suo
Shuangfu joseph Suo
DLDong Li
Dong Li
AWAiming Wang
Aiming Wang
JYJie Yang
Jie Yang
Spring failure is one of the critical causes of the structural damage and low screening efficiency of mining vibrating screens. Therefore, spring failure diagnosis is necessary to prompt maintenance for the safety and reliability of mining vibrating screens. In this paper, a spring failure diagnosis approach is developed. A finite element model of mining vibrating screens is established. Simulations are carried out and the spring failure influence rules of spring failure on the dynamic characteristics of mining vibrating screens are obtained. These influence rules indicate that the amplitude variation coefficients (AVCs) of the four spring seats in the x, y, and z directions can reveal two kinds of single spring failure and four kinds of double spring failure, which are useful for diagnosing spring failure. Furthermore, experiments are conducted. Comparison analyses of the experimental results and simulation results indicate that the proposed approach is capable of revealing various kinds of spring failure. Therefore, this approach provides useful information for diagnosing spring failure and guiding technical staff to routinely maintain mining vibrating screens.

10 November 2020 in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering
Verified
Journal Article
Closed access
PDF file
AWAiming Wang
Aiming Wang
PSPengfei Sun
Pengfei Sun
ZZZiwei Zhang
Ziwei Zhang
BHBaomei He
Baomei He
GMGuoying Meng
Guoying Meng
XCXiaohan Cheng
Xiaohan Cheng

20 September 2024 in Energies
Verified
Journal Article
Open access
PDF file
BSBinglin Song
Binglin Song
GMGuoying Meng
Guoying Meng
WHWei Huang
Wei Huang
AWAiming Wang
Aiming Wang
XCXiaoHan Cheng
XiaoHan Cheng
JYJie Yang
Jie Yang
Given that two-phase closed thermosiphons (TPCT) are a prevalent and efficacious means of heat transfer. However, non-condensable gas (NCG) may potentially impact the heat transfer performance of the aforementioned devices. Nevertheless, the theoretical analysis of heat transfer in TPCT containing NCG is not fully comprehensive and therefore requires further supplementation by means of relevant experiments. This paper presents the development and experimental investigation of a theoretical heat transfer model for a TPCT containing NCG. The research encompasses the optimal fluid-filling ratio of R22 and R410a working fluid and the impact of NCG on heat transfer in the condenser section of TPCT. Experimental findings indicate that TPCT with R22 and R410a working fluids at a fluid-filling ratio of 60% and 50%, respectively, demonstrate excellent isotherm and heat transfer efficiency. The presence of NCG affects the condenser section heat transfer process of the vapor, leading to a 2 °C decrease in the average temperature of the condenser section of the TPCT (Tca). In comparison with the TPCT without NCG, it was observed that an increase in the mass of NCG from 0.0097 to 0.0197 mol resulted in a reduction in the effective length of the condenser section (La) and effective heat transfer rate (κ) of R22 TPCT. The decrease in La was 75.1 mm, while the decrease in κ was 15.02%. Furthermore, at the same NCG mass, the effective heat transfer rate of R410a TPCT is evidently superior to that of R22 TPCT. The NCG in the TPCT can be removed by using a check valve. Nevertheless, this will result in a reduction in the fluid-filling ratio of the TPCT. The temperature of the R410a TPCT containing 0.0197 mol NCG with a fluid-filling ratio of 50% is comparable to that observed in fluid-filling ratio of 40% after the NCG is exhausted.

12 November 2025 in Energies
Verified
Journal Article
Open access
PDF file
BSBinglin Song
Binglin Song
GMGuoying Meng
Guoying Meng
AWAiming Wang
Aiming Wang
XCXiaoHan Cheng
XiaoHan Cheng
JYJie Yang
Jie Yang
In order to ensure the stability of the gravity heat pipe (GHP) heat exchanger in the mine return air waste heat recovery project and to explore the influence of the working fluid and filling ratio of the GHP on the heat transfer performance, this paper establishes a computational fluid dynamics (CFD) model of the GHP for mine return air waste heat recovery. The heat transfer characteristics and multiphase flow mechanism of the GHP with R22 and R410a working fluids at 30% to 80% filling ratios were studied using the VOF model from three aspects: two-phase flow, wall temperature, and thermal resistance. The validity of the model was verified through experimental data. The findings of the research indicate that the physical property parameters of the working fluid and the alterations in the filling ratio exert a substantial influence on the liquid-phase boiling heat transfer and the condensation process on the condenser wall. The CFD operation results demonstrate a high degree of congruence with the experimental data. The maximum deviation in the wall temperature is 2.9%. When the filling ratio is in the range of 50% to 60%, the axial distribution of the wall temperature tends to be flat. With regard to thermal resistance, both CFD and experimental results demonstrate a tendency of initially decreasing and subsequently increasing with increasing filling ratio. The average wall temperature of R410a GHP with a 50% filling ratio reached the highest value (20.3 °C), and the thermal resistance reached the lowest value (0.021 K/W), demonstrating superior heat transfer performance and excellent isothermal characteristics.