Ferroelectric BaTiO3/SrTiO3 with optimized c-axis-oriented multilayered thin films were epitaxially fabricated on (001) MgO substrates. The microstructural studies indicate that the in-plane interface relationships between the films as well as the substrate are determined to be (001)SrTiO3//(001)BaTiO3//(001)MgO and [100]SrTiO3//[100]BaTiO3//[100]MgO. The microwave (5 to 18 GHz) dielectric measurements reveal that the multilayered thin films have excellent dielectric properties with large dielectric constant, low dielectric loss, and high dielectric tunability, which suggests that the as-grown ferroelectric multilayered thin films can be developed for room-temperature tunable microwave elements and related device applications.
Adaptive coded aperture (diffraction) sensing, an emerging technology enabling real-time, wide-area IR/visible sensing and imaging, could benefit from new high performance biologically inspired image processing architectures. The memristor, a novel two terminal passive device can enable significantly powerful biologically inspired processing architectures. This device was first theorized by Dr. Leon Chua in 1971. In 2008, HP Labs successfully fabricated the first memristor devices. Due to its unique properties, the memristor can be used to implement neuromorphic functions as its dynamics closely model those of a synapse, and can thus be utilized in biologically inspired processing architectures. This paper uses existing device models to determine how device parameters can be tuned for the memristor to be used in neuromorphic circuit design. Specifically, the relation between the different models and the number of states the device can hold are examined.
Metallic transition-metal dichalcogenides are emerging as promising electrode materials for applications such as 2D electronic devices owing to their good electrical conductivity. In this study, a high-performance humidity sensor based on NbTe2 electrode material and an indium-doped SnO2 thin film sensing layer was fabricated using a pulsed laser deposition system. The morphology, structural, elemental compositions, and electrical properties of the as-deposited samples were characterized. Additionally, the humidity sensing response of the fabricated sensor with In-doped SnO2 (8:92 wt%) sensing film was evaluated in a wide range of relative humidity at room temperature. The results demonstrated that the humidity sensor based on In-doped SnO2 exhibited a high sensitivity of 103.1 Ω/%RH, fast response and recovery times, a low hysteresis value, good linearity, and repeatability. In addition, the sensor had good long-term stability, with a variation in impedance of less than 3%. The results indicated that the humidity sensor could be suitable for practical humidity sensing applications.
SnO2-based gas sensors have been widely synthesized and used for the detection of various hazardous gases. However, the use of doped SnO2 in sensing applications has recently attracted increased interest due to the formation of a synergistic effect between the dopant and the host. Moreover, in the case of a surface acoustic wave (SAW) sensor, the piezoelectric material used in the fabrication of the sensor plays a crucial role in defining the response of the SAW sensor. As a ferroelectric material, barium strontium titanate (Ba0.6Sr0.4TiO3) has recently been studied due to its intriguing dielectric and electromechanical properties. Its high acoustic velocity and coupling coefficient make it a promising candidate for the development of acoustic devices; however, its use as a piezoelectric material in SAW sensors is still in its infancy. In this paper, we present the design, fabrication and validation of an indium doped SnO2-based SAW gas sensor on Ba0.6Sr0.4TiO3 thin film for room temperature (RT) applications. Pulsed laser deposition was used to deposit thin films of Ba0.6Sr0.4TiO3 and indium-doped SnO2. Different characterization techniques were employed to analyze the morphology and crystallization of the films. The performance of the fabricated sensor was validated by exposing it to different concentrations of ethanol and then analyzing the recorded frequency shift. The sensor exhibited fast response (39 s) and recovery (50 s) times with a sensitivity of 9.9 MHz/Δ. Moreover, the sensor had good linear response and reproducibility. The fabricated indium-doped SnO2-based SAW gas sensor could be suitable for practical room temperature applications.
Ba0.5Sr0.5TiO3 (BST-0.5) thin films (600 nm) were deposited on single crystal MgO, SrTiO3 (STO), and LaAlO3 (LAO) substrates by pulsed laser deposition at an oxygen partial pressure of 80 mTorr and temperature of 720 °C. X-ray diffraction and in situ reflection high-energy electron diffraction routinely ascertained the epitaxial quality of the (100)-oriented nanocrystalline films. The broadband microwave (1–40 GHz) dielectric properties were measured using coplanar waveguide transmission line test structures. The out-of-plane relative permittivity exhibited strong substrate-dependent dielectric (relaxation) dispersions with their attendant peaks in loss tangent (tanδ), with the former dropping sharply from tens of thousands to ~1000 by 10 GHz. Although homogeneous in-plane strain , enhances with at lower frequencies, two crossover points at 8.6 GHz and 18 GHz eventually change the trend to: . The dispersions are qualitatively interpreted using (a) theoretically calculated (T)− phase diagram for single crystal and single domain BST-0.5 film, (b) theoretically predicted -dependent, anomaly that does not account for frequency dependence, and (c) literature reports on intrinsic and extrinsic microstructural effects, including defects-induced inhomogeneous strain and strain gradients. From the Vendik and Zubko model, the defect parameter metric, , was estimated to be 0.51 at 40 GHz for BST-0.5 film on STO.