A vast majority of heat exchangers suffer from unwanted deposition of material on the surface, which severely inhibits their performance and thus marks one of the biggest challenges in heat transfer. Despite numerous scientific investigations, prediction and prevention of fouling remain unresolved issues in process engineering and are responsible for large economic losses and environmental damage. This review article focuses specifically on crystallization fouling, providing a comprehensive overview of the state-of-the-art of fouling in heat exchangers. The fundamentals of the topic are discussed, as the term fouling resistance is introduced along with distinct fouling behaviour, observed in laboratory and industrial environments. Insight into subsequent phases of the fouling process is provided, along with the accompanying microscale events. Furthermore, the effects of fluid composition, temperature, flow velocity, surface condition, nucleate boiling and composite fouling are comprehensively discussed. Fouling modelling is systematically reviewed, from the early work of Kern and Seaton to recently used artificial neural networks and computational fluid dynamics. Finally, the most common fouling mitigation approaches are presented, including design considerations and various on-line strategies, as well as off-line cleaning. According to our review, several topics require further study, such as the initial stage of crystal formation, the effects of ageing, the interplay of two or more fouling mechanisms and the underlying phenomena of several mitigation strategies.

Growing world population and increasing population density are leading to increasing waste production with biological waste amounting to several billion tonnes annually. Together with the increasing need for renewable energy sources, waste-to-biogas conversion as a prime example of waste-to-energy technology represents a facile way of solving two problems simultaneously. This review aims to address the recent progress in the field of waste-to-biogas technology, which is lately facing intensive research and development, and present the current status of this waste treatment method both in technological and legislative terms. The first part provides an overview of waste and waste management issues. This is followed by a detailed description of applicable waste-to-energy (WtE) technologies and their current implementation in selected European countries. Moreover, national energy and climate plans (NECPs) of selected EU Member States are reviewed and compared with a focus on implementation of WtE technologies. In a further section, biogas production from waste around the world is reviewed and compared country wise. Finally, an outlook into the future of WtE technologies is provided alongside the conclusions based upon the reviewed data.

Increasing heat dissipation requirements of small and miniature devices demands advanced cooling methods, such as application of immersion cooling via boiling heat transfer. In this study, functionalized copper surfaces for enhanced heat transfer are developed and evaluated. Samples are functionalized using a chemical oxidation treatment with subsequent hydrophobization of selected surfaces with a fluorinated silane. Pool boiling tests with water, water/1-butanol mixture with self-rewetting properties and a novel dielectric fluid with low GWP (Novec™ 649) are conducted to evaluate the boiling performance of individual surfaces. The results show that hydrophobized functionalized surfaces covered by microcavities with diameters between 40 nm and 2 µm exhibit increased heat transfer coefficient (HTC; enhancements up to 120%) and critical heat flux (CHF; enhancements up to 64%) values in comparison with the untreated reference surface, complemented by favorable fabrication repeatability. Positive surface stability is observed in contact with water, while both the self-rewetting fluids and Novec™ 649 gradually degrade the boiling performance and in some cases also the surface itself. The use of water/1-butanol mixtures in particular results in surface chemistry and morphology changes, as observed using SEM imaging and Raman spectroscopy. This seems to be neglected in the available literature and should be focused on in further studies.

The enhancement of boiling heat transfer has been extensively shown to be achievable through surface texturing or fluid property modification, yet few studies have investigated the possibility of coupling both enhancement approaches. The present work focuses on exploring the possibility of concomitant enhancement of pool boiling heat transfer by using TiO₂-water nanofluid in combination with laser-textured copper surfaces. Two mass concentrations of 0.001 wt.% and 0.1 wt.% are used, along with two nanoparticle sizes of 4–8 nm and 490 nm. Nanofluids are prepared using sonification and degassed distilled water, while the boiling experiments are performed at atmospheric pressure. The results demonstrate that the heat transfer coefficient (HTC) using nanofluids is deteriorated compared to using pure water on the reference and laser-textured surface. However, the critical heat flux (CHF) is significantly improved at 0.1 wt.% nanoparticle concentration. The buildup of a highly wettable TiO₂ layer on the surface is identified as the main reason for the observed performance. Multiple subsequent boiling experiments using nanofluids on the same surface exhibited a notable shift in boiling curves and their instability at higher concentrations, which is attributable to growth of the nanoparticle layer on the surface. Overall, the combination of nanofluids boiling on a laser-textured surface proved to enhance the CHF after prolonged exposure to highly concentrated nanofluid, while the HTC was universally and significantly decreased in all cases.

We present the results of a study aimed at investigating the effects of electric fields on quasi-static bubble departure dynamics during pool boiling of perfluorohexane (FC-72) in microgravity conditions. Analysis was performed through an alternative formulation of the bubble momentum balance in which the contribution of non-uniform electric stress distributions at the bubble interface can be quantified through high-speed video measurements without having to numerically solve the laws of electrostatics. Data used in this study were obtained in the scope of the Multiscale Boiling Project, which included advanced single bubble growth experiments performed aboard the International Space Station. Our results confirm that bubble departure counterintuitively begins before the force resulting from electric stresses starts to pull the bubble up from the wall. When this occurs, it is shown that the shrinking process of the contact line accelerates, in agreement with known theoretical results. It is concluded that the electric force is essentially determined by the electric stress distribution at the bubble cap above the contact area. Furthermore, we show that the electric stress at the bubble interface is also responsible for the increase in bubble internal overpressure, which explains the early departure of the bubble while increasing the intensity of the electric field. The results of this study provide an important step in achieving a more comprehensive understanding of the bubble behavior at the heated surface in the presence of an electric field, which is essential to optimally design electrodes and two-phase heat transfer devices for future space applications.