Ultrafast fiber lasers have gained rapid advances in last decades for their intrinsic merits such as potential of all-fiber format, excellent beam quality, superior power scalability, and high single-pass gain, which opened widespread applications in high-field science, laser machining, precision metrology, optical communication, microscopy and spectroscopy, and modern ophthalmology, to name a few. Performance of an ultrafast fiber laser is well defined by the laser parameters including repetition rate, spectral bandwidth, pulse duration, pulse energy, wavelength tuning range, and average power. During past years, these parameters have been pushed to an unprecedented level. In this paper, we review these enabling technologies and explicitly show that the nonlinear interaction between ultrafast pulses and optical fibers plays the essential role. As a result of rapid development in both active and passive fibers, the toolbox of ultrafast fiber lasers will continue to expand and provide solutions to scientific and industrial problems.

We demonstrate, to the best of our knowledge, the first double-pass pre-chirp managed fiber amplifier. The double-pass fiber amplifier exhibits high gain allowing us to amplify chirped picosecond pulses from 20 mW to 113 W in a rod-type Yb-fiber corresponding to 38 dB gain. We study the dependence of static mode degradation (SMD) on the nonlinear phase shift (NPS) accumulated by the amplified pulse. Our results indicate that a larger nonlinear phase shift results in stronger nonlinear polarization evolution of the fundamental mode and leads to a lower threshold for SMD. After optimization, our pre-chirp managed amplifier seeded by 80 mW pulses delivers 102 W amplified power from the main output. The amplified pulses are compressed to 37 (55) fs with 90 (100) W average power by a grating pair (chirped mirrors). The double-pass configuration significantly simplifies the implementation of pre-chirp managed fiber amplifiers leading to an extremely compact system.

We demonstrate multimodal label-free nonlinear optical microscopy in human skin enabled by a fiber-based two-color ultrafast source. Energetic femtosecond pulses at 775 nm and 1250 nm are simultaneously generated by an Er-fiber laser source employing frequency doubling and self-phase modulation enabled spectral selection. The integrated nonlinear optical microscope driven by such a two-color femtosecond source enables the excitation of endogenous two-photon excitation fluorescence, second-harmonic generation, and third-harmonic generation in human skin. Such a 3-channel imaging platform constitutes a powerful tool for clinical application and optical virtual skin biopsy.

We demonstrate a high-power offset-free ultrafast mid-infrared (IR) laser source based on difference-frequency generation (DFG). Powerful signal pulses are obtained by filtering the rightmost spectral lobe of the optical spectra broadened by fiber-optic nonlinearities dominated by self-phase modulation. The resulting mid-IR pulses are tunable from 7 to 18 μm with up to 5.4 mW average power. We experimentally and numerically investigate power scaling of this DFG source and demonstrate that increasing the signal power is an efficient approach for generating high-power mid-IR pulses.

We incorporate two techniques into pre-chirp managed amplification (PCMA) to achieve high-energy ultrashort pulses with the duration well below 100 fs. Numerical simulations confirmed by our experimental results demonstrate that seeding PCMA with circularly polarized pulses instead of linearly polarized pulses can increase the amplified pulse energy by 1.5 times. We also employ high-dispersion chirped mirrors to compress the amplified pulses with the throughput efficiency as high as 98%. These two techniques allow us to demonstrate an Yb-fiber PCMA system that emits 50-MHz, 47-fs pulses with 101.2-W average power.