From the very start of their use until today, processes in Additive Manufacturing (AM) have found a way to grow from prototype production to individual and small-series production. Improvements in machinery, materials and other challenges in AM development have improved product quality, its mechanical properties and dimensional accuracy. Research in the field of dimensional accuracy must be focused on achieving better tolerances. From the beginning of AM, there has been a big issue in assuring dimensional repeatability and reproducibility of a part being printed over the course of several days. In order to examine that, a test plate was designed and built repeatedly with PolyJet technology over the course of several weeks. Measurements of dimensional accuracy and shape deviations of several typical features were carried out using X-ray Computed Tomography. Measurement results were analysed and presented in order to indicate the repeatability and reproducibility of PolyJet AM technology. Results show that PolyJet technology consistently produces parts within ±100 μm, at a 95% confidence interval, under reproducibility conditions of over a 1-month period. Accuracy for measurands (distance) in the x and y axis was significantly better than it was for the z axis which was from 56 to 197 µm, i.e., in the x and y axis, it was from −8 to 76 µm. Shape errors (i.e., cylindricity) were larger than positional or dimensional errors; this can be attributed to relatively large surface roughness and small feature sizes on the test plate that was used.

Plastic films utilized as greenhouse coverings play a vital role in safeguarding plantations from diverse weather conditions like sunlight, rain, hail, and wind. It is essential for these films to preserve their properties even after extended exposure to sunlight and water, while also maintaining transparency to support the unhindered growth of plants. The purpose of the study was to compare the properties of three types of plastic films: low density polyethylene diffuse film, low density polyethylene clear film, and ethylene tetrafluoroethylene film, before and after their ageing in weather test chamber with xenon-arc light in the presence of moisture. Two distinct types of PE films were chosen based on their suitability for specific regions in Croatia, whereas ETFE film was chosen as a potential new material that is gaining popularity across various industries, including agriculture. The properties investigated were tensile properties, transmittance by spectral analysis, and viscoelastic properties by dynamic mechanical analysis. Also, untreated films and the ones exposed to artificial ageing were compared by means of Fourier-transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. The administered tests revealed a certain level of property degradation due to ageing in all three films. However, none of the films showed a substantial level of deterioration, indicating their suitability as greenhouse coverings.

In recent years biodegradable plastic films have been increasingly used for various purposes, most often as grocery bags and for collecting bio-waste. Typically, the biodegradation of these films should take place in industrial compost facilities where the biodegradation process occurs under controlled conditions. Nevertheless, many of these films are often disposed of in home composting bins, so the aim of this study was to examine the course of biodegradation of compostable plastic films under uncontrolled conditions in garden composting sites during a period of four months. Mechanical properties were tested on seven different commercially available biodegradable films and bags that were placed in a garden composting bin from February to May. Both tensile properties and tensile-impact strength showed some unexpected results in terms of increase of the properties after the first, second, and third month for some films and bags. The same unpredictability was seen in FTIR and TG analyses.

In selective laser sintering (SLS) of polymer products the price of material is not the most important factor, but it does play a significant role when analysing the overall i.e. final price of the product, and therefore recycling of material is becoming an increasingly important factor, as well as the ratio of the shares in combining the original and the already used materials. In practice it is inevitable to use the products in various atmospheric conditions (UV radiation and humid environment), intentionally or unintentionally. UV light, with sun being its most common source, and average humidity in different parts of the world can be approximately from 20% to 90%, depending on time, day and geographic location. Therefore, it is necessary to determine how UV light after a longer period of time of exposure affects the product properties. The properties of the final product are also affected by the orientation in the working area of the machine. In the paper an analysis has been performed of the impact of three different types of product orientation in the machine working area and three different ratios of the used polyamide material (100% original, combined in 50:50 ratio of original and recycled and 100% recycled material after the third cycle of usage) on hardness of the polyamide product made by selective laser sintering.

When growing plants, it is important to ensure good protection from weather conditions (hail, frost, wind…) and from animals (birds, insects, wild pigs…) to imp When growing plants, it is important to ensure good protection from weather conditions (hail, frost, wind…) and from animals (birds, insects, wild pigs…) to imp