Multifunctional structures like the structural energy storage are investigated for enhanced lightweight design. Polymer electrolyte coated carbon fibres (PeCCF) function as a battery half-cell, combining negative electrode and structural electrolyte of the energy storage. The new material combination results in unknown mechanical and multiphysical effective characteristics. Looking forward to future multifunctional CFRP structures made from PeCCF, an influence of the multiphysical PeCCF properties on the CFRP laminate characteristics is expected. This paper presents experimental work, focusing on the first multiphysical characterization of state of the art PeCCF. Thereby, physical effects like the thermo-mechanical coupling in a temperature domain of 193 K < T < 720 K and the temperature induction by resistive heating are characterized. Important finding is a temperature dependent complex modulus of the material compound, which is related to the temperature dependent mechanical behaviour of the polymer coating. In addition, the ability to adapt and to predict the materials temperature, which is influenced by resistive heating, is shown. Furthermore, first indications of durability of the coating after cyclic mechanical loading are presented. In addition, new experimental methods for PeCCF investigation are proposed, e.g. the application of conductive epoxy resin for electrical connections.
Polymer electrolyte coated carbon fibres embedded in polymeric matrix materials represent a multifunctional material with several application scenarios. Structural batteries, thermal management materials as well as stiffness adaptive composites, made from this material, are exposed to significant joule heat, when electrical energy is transferred via the carbon fibres. This leads to a temperature increase of up to 100 K. The thermal behaviour of this composite material is characterized in this numerical study based on a RVE representation for the first time. Compared to classical fibre reinforced plastics, this material comprises a third material phase, the polymer electrolyte coating, covering each individual fibre. This material has not been evaluated for effective thermal conductivity, specific heat and thermal behaviour on the microscale before. Therefore, boundary conditions, motivated from applications, are applied and joule heating by the carbon fibres is included as heat source by an electro-thermal coupling. The resulting temperature field is discussed towards its effect on the mechanical behaviour of the material. Especially the temperature gradient is pronounced in thickness direction, leading to a temperature drop of , which needs to be included in thermal stress analysis in future thermo-mechanically coupled models. Another important emphasis is the identification of suitable homogenization and model reduction strategies in order to reduce the numerical effort spent on the thermal problem. Therefore, traditional analytical homogenization methods as well as a newly proposed “Two-Level Lewis-Nielsen” approach are discussed in comparison to virtually measured effective quantities. This extensive comparison of analytical and numerical methods is original compared to earlier works dealing with PeCCF composites. In addition, the accuracy of the new Two-Level Lewis-Nielsen method is found to fit best compared to classical methods. Finally, a first efficient and accurate 2D representation of the thermal behaviour of the PeCCF composite is shown, which reduces computational cost by up to 97%. This benefit comes with a different Temperature drop prediction in thickness direction of . In the context of future modelling of multifunctional PeCCF composite materials with multiphysical couplings, this deviation is acceptable with respect to the huge benefit for computational cost.
1 March 2021 in Functional Composites and Structures
Multifunctional composites including polymer electrolyte coated carbon fibres and polymer matrix systems gained recent interest in light-weight design related research areas. Compared to classical fibre reinforced plastics, the interphase, made by electropolymerisation on the fibre surface, represents a new, third material phase. The coating serves as ion-conducting separator in structural batteries and as insulating layer in energy transmitting multifunctional composites. The importance of this study is related to the fact, that multifunctional applications, based on such composites, are exposed to temperature changes in many cases. The coating material, acting as thin interphase, shows a significant temperature dependant Young’s modulus, determining the overall macroscopic behaviour under thermal loads. The new influences on the effective elastic properties of the composite are determined in this work in a 3D microstructural simulation approach based on a unit cell geometry. For the first time, the resulting effective properties are discussed towards the state of research and future work. First, the effective elastic stiffness is computed by isothermal virtual material testing, applying unit strain modes on the unit cell. Second, a uniform temperature change is applied and the effective thermal expansion coefficients are computed. The results show that a change of stiffness in the coating domain has a great influence on the effective stiffness in the transversal isotropic plane. The effective thermal expansion of the composite is also highly sensitive to the thermal expansion behaviour of the coating phase. Main conclusions are drawn towards multiphysical material simulation: Influences of the coating material properties have to be taken into account to compute effective properties. In particular, it is necessary to include the temperature dependant stiffness and the coefficients of thermal expansion of the interphase, which affect effective properties significantly. A thermo-mechanic coupled microscale model is needed to represent in-situ properties of such composites for applications with heat exposure.
A combined experimental and numerical approach for the analysis of convective heat transfer from a multifunctional flat plate specimen under aircraft icing conditions is presented. The experimental setup including a heat control and measurement system that is installed in a de-icing test bed. The ambient temperature (), air velocity (), and angle of attack () are varied, and their influence on heat transfer during local Joule heating is discussed. The numerical approach utilises the results to compute the convective heat transfer coefficients (HTC) based on Newton’s convective heat transfer condition. Results indicate that the numerical model represents the heat transfer behaviour with high accuracy. The HTC for free convection was found to hold and for forced convection conditions with minor scattering. The increase in HTC under forced convection conditions has a significant effect on the overall heat transfer behaviour, resulting in high temperature gradients within the material. The functional optimisation of multifunctional structures will benefit from including application related convection conditions, dealing with resulting temperature fields by structural design. It is expected that multifunctional structures for de-icing as well as for structural energy storage, morphing structures, or stiffness adaptive structures with similar material constituents will benefit from this recognition.