Thomas Kletschkowski

Prof. Dr. Thomas Kletschkowski

orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2021 in Applied Mechanics
Verified
Journal Article
Open access
PDF file
MSMaximilian Otto Heinrich Schutzeichel
Maximilian Otto Heinrich Schutzeichel
TKThomas Kletschkowski
Thomas Kletschkowski
HMHans Peter Monner
Hans Peter Monner
Polymer electrolyte coated carbon fibres embedded in polymeric matrix materials represent a multifunctional material with several application scenarios. Structural batteries, thermal management materials as well as stiffness adaptive composites, made from this material, are exposed to significant joule heat, when electrical energy is transferred via the carbon fibres. This leads to a temperature increase of up to 100 K. The thermal behaviour of this composite material is characterized in this numerical study based on a RVE representation for the first time. Compared to classical fibre reinforced plastics, this material comprises a third material phase, the polymer electrolyte coating, covering each individual fibre. This material has not been evaluated for effective thermal conductivity, specific heat and thermal behaviour on the microscale before. Therefore, boundary conditions, motivated from applications, are applied and joule heating by the carbon fibres is included as heat source by an electro-thermal coupling. The resulting temperature field is discussed towards its effect on the mechanical behaviour of the material. Especially the temperature gradient is pronounced in thickness direction, leading to a temperature drop of 1 °Cmm, which needs to be included in thermal stress analysis in future thermo-mechanically coupled models. Another important emphasis is the identification of suitable homogenization and model reduction strategies in order to reduce the numerical effort spent on the thermal problem. Therefore, traditional analytical homogenization methods as well as a newly proposed “Two-Level Lewis-Nielsen” approach are discussed in comparison to virtually measured effective quantities. This extensive comparison of analytical and numerical methods is original compared to earlier works dealing with PeCCF composites. In addition, the accuracy of the new Two-Level Lewis-Nielsen method is found to fit best compared to classical methods. Finally, a first efficient and accurate 2D representation of the thermal behaviour of the PeCCF composite is shown, which reduces computational cost by up to 97%. This benefit comes with a different Temperature drop prediction in thickness direction of 1.5 °Cmm. In the context of future modelling of multifunctional PeCCF composite materials with multiphysical couplings, this deviation is acceptable with respect to the huge benefit for computational cost.

1 March 2010 in Noise & Vibration Worldwide
Verified
Journal Article
Closed access
KKK. Kochan
K. Kochan
TKThomas Kletschkowski
Thomas Kletschkowski
DSDelf Sachau
Delf Sachau
HBH. Breitbach
H. Breitbach
An active noise control system is developed for the loadmaster area of a propeller driven transport aircraft. The loadmaster area is a small semi-enclosed volume connected to the large cargo hold. This coupling of a small room with a large room yields to new questions when an active noise control system is designed: Which effects does the coupling have on the noise field inside the small loadmaster area? Which influence do these effects have on the active noise control system? How complex is the uncertainty induced by the coupling to the large cargo? The analysis of this coupling was done in two ways. The first one, an energy based method, is used to analyze the acoustical energy flow between the loadmaster area and the cargo hold. The second one, a substructure technique, is used to study the influence on the eigenfrequencies and eigenmodes of such a coupled system. Afterwards, the theoretic results were confirmed with an experimental forced vibration analysis. The most important result is that the shape of the noise field inside the loadmaster area is less sensitive in spite of the large cargo hold. Moreover, an active noise controller was developed to handle the controller tasks. First experimental control results are given in the last section. These results have shown successful noise reduction up to 23 dB without any controller optimization.

11 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YWYi Wang
Yi Wang
TKThomas Kletschkowski
Thomas Kletschkowski
A smart exciter coupled to cabin panels can be used as a new type of loudspeaker for emergency announcements in the aircraft cabin. The same device can also be used as a semi-active vibration control system which is effective in reducing the amplitude of structural vibration. The objective of this paper is to investigate the potential of vibration reduction using a smart exciter in combination with an optimized resistive-inductive shunt circuit, which serves as an absorbing network. First, the vibration reduction effect has been analyzed numerically using a simulation framework realized with COMSOL and MATLAB/Simulink. In a second step, the reduction effect of the smart exciter together with a resistive-inductive shunt circuit, which is produced by the Center of Applied Aeronautical Research (Zentrum für Angewandte Luftfahrtforschung GmbH, Hamburg, Germany), has been investigated experimentally. The results presented here prove that the smart exciter together with a resistive-inductive shunt can be highly effective in reducing structural vibrations.

30 November 2023 in Vibration
Verified
Journal Article
Open access
PDF file
TKThomas Kletschkowski
Thomas Kletschkowski
Theoretical and non-dimensional investigations have been performed to study the vibration control potential of approaches that are not only based on viscoelastic but also on endochronic elements. The latter are known from the endochronic theory of plasticity and provide the possibility of establishing rate-independent schemes for vibration control. The main question that has to be answered is: Can rate-independent damping be efficiently used to reduce mechanical vibrations? To answer this question, non-dimensional models for dynamical systems are derived and analyzed numerically in the time domain as well as in the frequency domain. The results are used to compare the performance of an optimally tuned endochronic absorber to the performance of an optimally tuned dynamic absorber with viscoelastic damping. Based on a novel closed-form representation for non-linear systems with endochronic elements, it has been possible to prove that the rate-independent control of vibration results in an overall control profit that is close to the control profit obtained by the application of well-established approaches. It has also been found that the new concept is advantageous if anti-resonances have to be considered in broadband vibration control. Based on these novel findings, a practical realization in the context of active vibration control is proposed in which the rate-independent control law is implemented with an appropriate signal processing hardware.

7 April 2024 in Dynamics
Verified
Journal Article
Open access
PDF file
TKThomas Kletschkowski
Thomas Kletschkowski
For many engineering applications, it is sufficient to use the concept of simple materials. However, higher gradients of the kinematic variables are taken into account to model materials with internal length scales as well as to describe localization effects using gradient theories in finite plasticity or fluid mechanics. In many approaches, length scale parameters have been introduced that are related to a specific micro structure. An alternative approach is possible, if a thermodynamically consistent framework is used for material modeling, as shown in the present contribution. However, even if sophisticated and thermodynamically consistent material models can be established, there are still not yet standard experiments to determine higher order material constants. In order to contribute to this ongoing discussion, system identification based on the method of self-adaptive filtering is proposed in this paper. To evaluate the effectiveness of this approach, it has been applied to second-order gradient materials considering longitudinal vibrations. Based on thermodynamically consistent models that have been solved numerically, it has been possible to prove that system identification based on self-adaptive filtering can be used effectively for both narrow-band and broadband signals in the field of second-order gradient materials. It has also been found that the differences identified for simple materials and gradient materials allow for condition monitoring and detection of gradient effects in the material behavior.

17 February 2025 in J
Verified
Journal Article
Open access
PDF file
TKThomas Kletschkowski
Thomas Kletschkowski
The reduction of noise and vibration is possible with passive, semi-active and active control strategies. Especially where self-adaptive control is required, it is necessary to evaluate the noise reduction potential before the control approach is applied to the real-world problem. This evaluation can be based on a virtual model that contains all relevant sub-systems, transfer paths and coupling effects on the one hand. On the other hand, the complexity of such a model has to be limited to focus on principal findings such as convergence speed, power consumption, and noise reduction potential. The present paper proposes a fully coupled electro-vibro-acoustic model for the evaluation of self-adaptive control strategies. This model consists of discrete electrical and mechanical networks that are applied to model the electro-acoustic behavior of noise and anti-noise sources. The acoustic field inside a duct, terminated by these electro-acoustic sources, is described by finite elements. The resulting multi-physical model is capable of describing all relevant coupling effects and enables an efficient evaluation of different control strategies such as the local control of sound pressure or active control of acoustic absorption. It is designed as a benchmark model for the benefit of the scientific community.