Physical and mechanical properties of timber components are the basis of developing the technical measures for the conservation and restoration of historical timber structural buildings. By means of integrating on-site investigation (such as a visual survey, moisture content test, micro-drilling resistance test, and material samples collection of historical timber components) and laboratory tests, this study proposed a series of methodologies for comprehensively evaluating the physical and mechanical properties of timber. This method can be quickly mastered by various non-professionals and can help the cross-learning of various disciplines engaged in the research of architectural heritage protection. As a trial, the methodologies were applied to survey and assess a typical historical Chinese timber structural building named the Fujiu Zhou house (the house is located in No. 19, Qinglian lane, Yangzhou city, Jiangsu province, China). The paper studies the 224 components of the main structure of the building, including 128 columns and 96 beams. With the help of the components’ defects and damage status, GB/T13942.2-1992 and the National Lumber Grades Authority (NLGA), the grade of timber components was distinguished. The modulus of elasticity (MOE), modulus of rupture (MOR), and other related material properties parameters of timber components were also obtained. The trial results verify that the proposed methodologies are reasonable, and they can be helpful for the conservation of a historical timber structural building.
Vibration responses of building structure closely related to the structural health status. In this paper, wavelet singular spectrum entropy (WSSE) is proposed to evaluate the damage condition of building structure. A 1/3 scaled model of a Chinese ancient timber structure has been constructed, and three damage conditions and one restored condition of the structure are simulated. The acceleration responses for undamaged and the four simulated damaged and restored conditions are measured and analyzed by employing WSSE to identify the location at which the structure has incurred damage. Results show that (1) the relative variation rate of WSSE for the damaged position changes significantly; (2) the relative variation rate of WSSE of the point that is damaged more severely would become higher; and (3) signals of North-South and East-West directions are required for further identification. Moreover, a finite element modeling analysis of the timber structure under different damage conditions is performed, and the results verify the applicability of the method proposed.
Timber structural performance is significantly influenced by natural knots, which serve as critical indicators in ancient architectural heritage preservation and modern sustainable building design. However, existing studies lack a comprehensive quantitative analysis of how the randomness of timber knot parameters relates to load-bearing capacity degradation. This study introduces a multiscale evaluation framework that integrates physical testing, probabilistic modeling, and data-driven techniques. Firstly, static tests on full-scale timber beams with artificially introduced knots reveal the failure mechanisms and load capacity reduction associated with knots in the tension zone. Subsequently, a three-dimensional Monte Carlo simulation, modeling random distributions of knot position and size, demonstrates that the midspan region is most sensitive to knot effects, with load capacity loss being more pronounced on the tension side than on the compression side. Finally, a predictive model based on a fully connected neural network is developed; feature analysis indicates that the longitudinal position of knots exerts a stronger nonlinear influence on load capacity than radial depth or diameter. The results establish a mapping between knot characteristics, stress field distortion, and ultimate load capacity, providing a theoretical basis for safety evaluation of historic timber structures and the design of defect-tolerant timber beams in modern engineering.