Jakub Bryła

Mr. Jakub Bryła

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 August 2021 in Machines
Verified
Journal Article
Open access
PDF file
JBJakub Bryła
Jakub Bryła
Adam MartowiczAdam Martowicz
Adam Martowicz
The work deals with the investigation of the variation of the selected 3D printing process properties that originate from the choice of a slicer. Specifically, the main aim of the present study was to assess the induced changes of the kinematic and geometric properties considered by the slicer for the printing process making use of the G-code readings. The paper provides adequate definitions and formulas required to characterize the slicer’s configuration. Next, the selected cases of the process parameters’ changes were studied, primarily taking into account varying layer height and infill. The authors performed a detailed analysis regarding the geometric implications at the mesoscale due to the slicer’s settings. Appropriate modifications of the slicer’s properties were also proposed and verified, making it possible to match the geometric and kinematic characteristics of the printed part.

23 April 2019 in Nonlinear Dynamics
Verified
Journal Article
Open access
PDF file
Adam MartowiczAdam Martowicz
Adam Martowicz
JBJakub Bryła
Jakub Bryła
WSWieslaw Jerzy Staszewski
Wieslaw Jerzy Staszewski
MRMassimo Ruzzene
Massimo Ruzzene
Tadeusz UhlTadeusz Uhl
Tadeusz Uhl
The work is primarily devoted to the peridynamic model elaborated for a solid body made of shape memory alloys (SMAs). The superelasticity effect is taken into consideration as well as its practical applications. Hence, the numerical simulations, making use of the phenomena of superelasticity, are carried out for the model of an SMA wire to investigate mechanical energy dissipation. The nonlocal peridynamic model of an SMA component is derived based on the theory proposed by Lagoudas—introduced to describe the phenomenon of solid phase transitions that occur in SMA. The results of the conducted experimental work are applied by the authors to validate the elaborated model. Moreover, an alternative verification of the peridynamic model is also performed using other numerical tool—the finite element code based on the analytical approach for modeling SMA, developed by Auricchio. The hysteretic character of the stress–strain relationship for the modeled SMA component, which undergoes the superelasticity effect, is shown using quasi-static peridynamic simulations. Finally, the capability of energy dissipation when cyclic loading for the elaborated nonlocal model is investigated via dynamic simulations. The numerical results obtained for the studied case are discussed to show the applicability of the presented modeling approach in the field of structural dynamics. A particular focus is placed on the available structural stiffness control functionality in mechanical systems equipped with SMA and efficiency of energy dissipation in SMA-based dampers, which may be effectively applied to suppress mechanical vibrations. Both mentioned application areas for SMA are of the authors’ special concern in the designing process of the nonlinear supporting structure in gas foil bearings, which is also discussed in the final part of the paper to highlight the practical aspects of the conducted research.

6 January 2021 in Meccanica
Verified
Journal Article
Closed access
PDF file
Adam MartowiczAdam Martowicz
Adam Martowicz
SKSławomir Kantor
Sławomir Kantor
LPLukasz Jacek Pieczonka
Lukasz Jacek Pieczonka
JBJakub Bryła
Jakub Bryła
Jakub RoemerJakub Roemer
Jakub Roemer

10 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
JBJakub Bryła
Jakub Bryła
Adam MartowiczAdam Martowicz
Adam Martowicz
MPMaciej Petko
Maciej Petko
KGKonrad Gac
Konrad Gac
KKKonrad Kobus
Konrad Kobus
AKArtur Kowalski
Artur Kowalski
This paper focuses on a wear evaluation conducted for prototype spur and herringbone gears made from PET-G filament using additive manufacturing. The main objective of this study is to verify if 3D-printed gears can be considered a reliable choice for long-term exploitation in selected mechanical systems, specifically automated retail kiosks. For this reason, two methods were applied, utilizing: (1) vision-based inspection of the gears’ cross-sectional geometry and (2) the statistical characterization of the selected kinematic parameters and torques generated by drives. The former method involves destructive testing and allows for identification of the gears’ operation-induced geometric shape evolution, whereas the latter method focuses on searching for nondestructive kinematic and torque-based indicators, which allow tracking of the wear. The novel contribution presented in this paper is the conceptual and experimental application of the identification of the changes of 3D-printed parts’ geometric properties resulting from wear. The inspected exploited and non-exploited 3D-printed parts underwent encasing in resin and a curing process, followed by cutting in a specific plane to reveal the desired shapes, before finally being subjected to a vision-based geometric characterization. The authors have experimentally demonstrated, in real industrial conditions, on batch production parts, the usefulness of the presented destructive testing technique providing valid indices for wear identification.

1 January 2014 in Mechanics and Control
Verified
Journal Article
Open access
PDF file
JBJakub Bryła
Jakub Bryła
Adam MartowiczAdam Martowicz
Adam Martowicz
SHAPE-MEMORY MATERIALS AS CONTROL ELEMENTS USED IN DOT BRAILLE ACTUATOR

27 June 2024
Verified
Book Chapter
Closed access
PDF file
JBJakub Bryła
Jakub Bryła
JTJan Tuptoński
Jan Tuptoński
KWKrzysztof Więcek
Krzysztof Więcek
MBMaciej Bogacz
Maciej Bogacz
Adam MartowiczAdam Martowicz
Adam Martowicz