This paper focuses on a wear evaluation conducted for prototype spur and herringbone gears made from PET-G filament using additive manufacturing. The main objective of this study is to verify if 3D-printed gears can be considered a reliable choice for long-term exploitation in selected mechanical systems, specifically automated retail kiosks. For this reason, two methods were applied, utilizing: (1) vision-based inspection of the gears’ cross-sectional geometry and (2) the statistical characterization of the selected kinematic parameters and torques generated by drives. The former method involves destructive testing and allows for identification of the gears’ operation-induced geometric shape evolution, whereas the latter method focuses on searching for nondestructive kinematic and torque-based indicators, which allow tracking of the wear. The novel contribution presented in this paper is the conceptual and experimental application of the identification of the changes of 3D-printed parts’ geometric properties resulting from wear. The inspected exploited and non-exploited 3D-printed parts underwent encasing in resin and a curing process, followed by cutting in a specific plane to reveal the desired shapes, before finally being subjected to a vision-based geometric characterization. The authors have experimentally demonstrated, in real industrial conditions, on batch production parts, the usefulness of the presented destructive testing technique providing valid indices for wear identification.
Over the last decade, a constantly growing trend of the popularization of self-service automated stores has been observed. Vending machines have been expanded into fully automated stores, the offer of which is comparable to small, conventional stores. One of the basic reasons for the popularization of modern automated stores is the reduction in a store’s energy consumption while ensuring a comparable range of products offered. The research into possibilities of reducing greenhouse gases emission is important in terms of the environment and climate protection. The research presented in the paper concerns the development of a model for determining electricity consumption, operating costs and CO2 emission of an automated store designed and developed by Delfin company. In the developed model, the potential location of the store, prevailing climatic conditions and expected product sales are taken into account. Estimated energy demand for the store is the information of key importance for the potential investors and the manufacturer of the automated store. It is worth emphasizing that the average annual electrical energy consumption evaluated for a grocery store of an area of 70 m2 amounted to approximately 38.4 MWh, while for an automated store of an area of 9 m2 and a comparable product range, the electricity consumption was approximately 10.1 MWh, i.e., 74% smaller.