The objective of this paper is to review the current knowledge on the development of nanostructured zirconia-based ceramics and composites suitable for application in dentistry. Isi Web of Science, Science Direct, Scientific.net databases, and Google were searched electronically for the period of 1980 to the present, matching the keywords “nano” with the keywords: “Zirconia, ZrO₂, Y-TZP, and dental, dentistry”. A total of 74 papers were found, with the majority coming from Asia, indicating a more active scientific interest on the topic in this geographic area, followed by Europe, South America, and North America. The research shows, even though the scientific activity on nanostructured ceramics was intense in the last fifteen years, the development of fully dense zirconia-based nanoceramics is yet at an initial stage, most of all from the point of view of the clinical applications. It has been demonstrated that nanostructured ceramics can show improved properties because of the reduction of the grain size to the nanoscale. This is also true for zirconia-based nanoceramics, where some improvements in mechanical, optical, as well as resistance in low-temperature degradation have been observed. Potential applications of this class of material in the dental field are discussed, summarizing the results of the latest scientific research.

The present work shows the path towards the industrial production of ceramic tiles containing a high amount of recycling materials in the substitution of natural raw materials. Starting from the applied research at laboratory scale, which is able to demonstrate the work feasibility, other important milestones consist of pilot scale production until the proper industrial production. Finally, when all these steps are positively achieved, the practice is consolidated and it is possible to reach the concrete sustainability benefits (social, environmental and economic). The results of an industry driven project that aimed to produce porcelain stoneware tiles containing 85% of recycled materials were selected to show this path. This innovative ceramic product—containing soda-lime scrap glass from urban-separated collection (post-consumer waste) and unfired scrap tiles from industrial ceramic process (pre-consumer waste)—was sintered about 200 °C lower than a traditional porcelain stoneware tile. It maintains high technical performances belonging to class BIa of the International Standard of ceramic tile classification (EN ISO 14411). Moreover, this product fulfils the standard requirements for dry-pressed ceramic tiles with low water absorption (≤0.5%), and it obtained the certification UNI Keymark. The LCA study was also performed and the results showed a significantly lower environmental impact of this innovative product compared to a traditional porcelain stoneware tile.

Plasma vitrification is a safe technique for eliminating the environmental impact of asbestos-containing materials. Additional advantages may arise from the obtainment of valuable ceramics from vitrified waste, if low cost treatments, comparable to those applied to traditional ceramics, are feasible. In the present paper the application of a fast heating rate (40°C/min) to produce dense sinter-crystallized materials from vitrified asbestos-containing waste, having a strength in excess of 100 MPa, is discussed. Sinter-crystallization, with fast heating processes, constituted also the basis of cellular glass-ceramics and a new type of stoneware, with waste glass replacing conventional feldspar fluxes

Ceramic tiles are bacteriostatic materials; however, the COVID-19 emergency has pushed tile producers to improve surfaces’ antibacterial properties. The aim of this work was to validate a silver-based antibacterial treatment applied to porcelain stoneware tiles based on natural and waste materials, thus correlating surface functionalization to tile composition and relevant physical, microstructural, and textural parameters. The treatment was applied before firing, with and without a polymeric primer. Antibacterial activity tests, stain resistance tests, and contact angle measurements were carried out on fired tiles. Further investigations were made by SEM and optical profilometry in order to study the morphological–structural profile of tile surfaces. Results showed strong antibacterial activities for all the functionalized tiles, which were mainly correlated to the morphological and textural parameters of ceramic surfaces, as well as the presence of the polymeric primer.