Compare the accuracy of intraoral digital impression in full-arch implant-supported fixed dental prosthesis acquired with eight different intraoral scanner (Ios). A polymethyl methacrylate acrylic model of an edentulous mandible with six scan-abutment was used as a master model and its dimensions measured with a coordinate measuring machine. Eight different Ios were used to generate digital impression: True Definition, Trios, Cerec Omnicam, 3D progress, CS3500, CS3600, Planmeca Emelard and Dental Wings. Fifteen digital impressions were made. A software called "Scan-abut" was developed to analyse and compare the digital impression with the master model, obtaining the scanning accuracy. The three-dimensional (3D) position and distance analysis were performed. Mean value of the 3D position analysis showed that the True Definition (31 μm ± 8 μm) and Trios (32 μm ± 5 μm) have the best performance of the group. The Cerec Omnicam (71 μm ± 55 μm), CS3600 (61 μm ± 14 μm) have an average performance. The CS3500 (107 μm ± 28 μm) and Planmeca Emelard (101 μm ± 38 μm) present a middle-low performance, while the 3D progress (344 μm ± 121 μm) and Dental Wings (148 μm ± 64 μm) show the low performance. The 3D distance analysis showed a good linear relationship between the errors and scan-abutment distance only with the True Definition and CS3600. Not all scanners are suitable for digital impression in full-arch implant-supported fixed dental prosthesis and the weight of the output files is independent from the accuracy of the Ios.

The objective of this paper is to review the current knowledge on the development of nanostructured zirconia-based ceramics and composites suitable for application in dentistry. Isi Web of Science, Science Direct, Scientific.net databases, and Google were searched electronically for the period of 1980 to the present, matching the keywords “nano” with the keywords: “Zirconia, ZrO₂, Y-TZP, and dental, dentistry”. A total of 74 papers were found, with the majority coming from Asia, indicating a more active scientific interest on the topic in this geographic area, followed by Europe, South America, and North America. The research shows, even though the scientific activity on nanostructured ceramics was intense in the last fifteen years, the development of fully dense zirconia-based nanoceramics is yet at an initial stage, most of all from the point of view of the clinical applications. It has been demonstrated that nanostructured ceramics can show improved properties because of the reduction of the grain size to the nanoscale. This is also true for zirconia-based nanoceramics, where some improvements in mechanical, optical, as well as resistance in low-temperature degradation have been observed. Potential applications of this class of material in the dental field are discussed, summarizing the results of the latest scientific research.

The aim of this technical procedure was to use a fully digital technique (FDT) for full-arch implant support rehabilitation. The FDT was used to transfer the provisional restoration parameters to definitive restorations using intraoral scanners. Three sets of digital impressions were obtained. Through the first set, standard tessellation language 1 (STL1), provisional restorations screwed to implants and the surrounding gingival tissue was captured. STL2 consisted of intraoral scans of standardized scanbodies screwed to implants to collect 3D positioning data of implants. STL3 included the digital impression of provisional restoration out of the mouth in order to capture the gingival architecture and the peri-implant soft tissue that was not possible to transfer with the previous impressions. STL1, STL2, and STL3 were combined using computer-aided design (CAD) functions into a single file, STL4. Thus, STL4 contained information on the 3D implant positions, soft tissue architectures, occlusal relationships, correct occlusal vertical dimension and aesthetic features. Using STL4, the master models with implant analogues were 3D printed. Computer-aided design and computer-aided manufacturing milled (CAD/CAM-milled) aluminium bars and a resin prototype were produced to test the accuracy and the functional and aesthetic parameters. Titanium frameworks were digitally designed using STL4, milled using CAD/CAM, and finalized with pink resin and resin teeth. The FDT provided an effective fully digital protocol to capture all information for provisional full-arch implant restorations using an intraoral scanner and transfer that information to definitive restorations.