Industrial activities produce a variety of pollutants that may not be easily treated using centralized wastewater treatment systems based on a single treatment unit. The variability of the pollutants brings the importance of industrial-specific integrated wastewater treatment plants such as integrated membrane filtration systems. However, the performance of a membrane filtration process can be highly affected by the presence of high amounts of suspended particles in the raw wastewater. Therefore, proper selection of a pre-treatment unit prior to a membrane filtration wastewater treatment system is a key aspect of its performance. This study investigated the performance of an integrated membrane filtration treatment system connected to an electrochemical process (pre-treatment) on the purification of a poultry slaughterhouse wastewater toward achieving a high-quality effluent. The industrial-scale treatment plant installed at the Izhevsk Production Corporative (PC) poultry farm in Kazakhstan is composed of an electrochemical, ultrafiltration (UF), and reverse osmosis (RO) as the main treatment units. From the analysis results, the electrochemical pre-treatment unit was observed to be highly effective for the removal of some physicochemical parameters such as turbidity, color, total suspended solids, total iron, aluminum, chemical oxygen demand, and biochemical oxygen demand; with removal efficiency ranging from 71 to 85%. The low removal efficiency of the pre-treatment system was also observed from free and total chlorine, nitrites, nitrates, phosphates, and ammonium nitrogen; with removal efficiency ranging from 4 to 45%. While in general, the overall treatment train was observed to be highly efficient for some physicochemical parameters such as turbidity, color, total suspended solids, as well as chemical and biochemical oxygen demand; maintaining almost 100% removal efficiency throughout the study period. Also, the high removal efficiency of the electrochemical pre-treatment processes led to a relatively low rate of cake formation on the membrane filters.

The efficiency of a wastewater treatment process may be affected by several factors including the scale at which the system is operating. This study aimed at investigating the influence of scale on a poultry slaughterhouse wastewater treatment process. The process is comprised of several units including electrolysis, membrane filtration, and ultraviolet irradiation. The results of the industrial-scale wastewater treatment plant of the Izevski poultry farm slaughterhouse in Kazakhstan were compared with those of a lab-scale wastewater treatment process under the same conditions. The traditional and water quality index (WQI) approaches were used to present the results and the drinking water quality standards of Kazakhstan were used as a reference. The industrial and lab-scale plants showed high purification efficiency for most of the studied water quality parameters. The comparative analysis based on the WQI showed that the industrial-scale wastewater treatment plant outperforms the lab-scale wastewater treatment process.

With the interest to reuse and recycle the wastewater for technological use, this project aims to test the treatment of wastewater from poultry slaughterhouse industry from three main sections of the poultry slaughtering process, defeathering, eviscerating and cooling processes. The samples for the project were obtained from Izhevskoe a Kazakhstani company. The technology used is a combination of electrocoagulation, ultrafiltration, and photochemical system and its goal is to provide treated water that can be re-utilized in the poultry industry for sterilization of technical equipment without contaminating and affecting the quality of the poultry products. The treatment of wastewater samples lasted in total for 40 min. From the results, it was found that indicators such as BOD, COD, and phosphates had removal efficiency of almost 100%, while the microbiological colonies were all eradicated from then wastewater making the treated water microbes free. Hence, proving this system to be effective for the treatment of poultry slaughterhouse wastewater and safe for technological reutilization.

The article presents the research results related to the influence of turbulence on the efficiency of the combustion chamber of gas turbine. An artificial increase in the intensity of turbulence is considered as a way to improve the formation of a fuel-air mixture. Turbulent flow is formed due to the installation of guide swirlers at the entrance to the device for creating a fuel-air mixture ? a micro module. The angle of rotation of the swirler blades is selected. Theoretical research, mathematical software modelling, as well as an aerodynamic experiment have been carried out. As a result, design solutions are provided that significantly increase the efficiency and reliability of the gas turbine combustion chamber. In the course of the study, guide vanes were selected, and their design was established. The recommended swing angle of the swirler guide vanes is 40?. The recommended depth of the fuel injector inside the chamber is 1.0 gauge.

According to the Bureau of National Statistics of the Republic of Kazakhstan, by the end of 2023, approximately 120 million tons of municipal solid waste (MSW) had been generated across over 3200 landfills in the country. About 4.5 million tons are generated annually, of which only about 15% are recycled. The accumulation of both unsorted and sorted waste poses significant environmental risks, primarily through the generation of methane, a greenhouse gas that is 28 times more dangerous than carbon dioxide in contributing to the planet’s greenhouse effect over a century and 84 times more effective over a 20-year timeframe. The objective of this research is to examine the physicochemical composition, as well as the physical and thermal-chemical properties, of municipal solid waste from six cities in Kazakhstan: Astana, Almaty, Shymkent, Aktobe, Karaganda, and Ust-Kamenogorsk. Unlike existing studies, this study has a uniform waste sample, which includes the complete emptying of dozens of containers from different areas of the cities under consideration. Thus, the average composition of solid waste across the cities was maintained. Analysis of the physicochemical composition was conducted for both unsorted and sorted municipal solid waste from all cities, determining the total and analytical moisture content, ash content, and volatile matter, as well as the higher and lower calorific values. The calorific value of unsorted waste by city was as follows, in kJ/kg: Astana,8850.37; Almaty, 9244.57; Atobe, 9596.41; Shymkent, 9425.48; Karaganda, 8902.8; Ust-Kamenogorsk, 9669.07. The calorific value of sorted waste was as follows, in kJ/kg: Astana, 11,922.79; Almaty, 11,692.31; Atobe, 11,913.13; Shymkent, 12,494.38; Karaganda, 11,671.92; Ust-Kamenogorsk, 12,462.52. The efficiency of sorting was estimated as the first stage of MSW processing. The efficiency factor of the manual sorting process in practice was 0.4–0.8. The results obtained enable the evaluation of technologies for the effective management of municipal solid waste and facilitate experimental investigations into semi-industrial pyrolysis, combustion, plasma processing, and composting facilities.