At present, the world is committed to the development of environmentally friendly, sustainable and industrial safety. The effective treatment of industrial solid waste can be applied in the field of industrial safety. It is one of the ways to apply industrial solid waste to industrial safety to modify industrial solid waste and combine active powder to prepare industrial solid waste-based composite powder explosion inhibitors and apply it to underground coal dust explosion. This paper introduces the modification and preparation methods of industrial solid waste, and analyzes the good explosion suppression effect and good economic benefit of industrial solid waste-based composite powder explosion inhibitors on coal dust explosion. In this paper, four kinds of industrial solid wastes (red mud, slag, fly ash and sludge) were modified, and the modified solid waste materials with good carrier characteristics were obtained. Combined with a variety of active powders (NaHCO₃, KH₂PO₄ and Al(OH)₃), the industrial solid waste-based composite powder explosion inhibitors were obtained by solvent-crystallization (WCSC) and dry coating by ball milling (DCBM). Those kinds of explosion inhibitors can suppress the explosion of pulverized coal in 40–50% of cases. Compared with the powder explosion inhibitor commonly used in industry, it has a lower production cost and better explosion suppression effect. Those kinds of explosion inhibitors have a good industrial application prospect.

In this paper, a method for waste incineration slag is proposed. An incineration acidification alkalization modification was carried out based on the characteristics of the oxides (SiO₂, CaO, Al₂O₃, Fe₂O₃, and MgO) of waste incineration slag. With modified slag as the carrier and NaHCO₃ as the supporter, a slag-based composite powder explosion inhibitor was prepared with the solvent-crystallization wet coating (WCSC), ball milling dry coating (DCBM), and air impact dry coating (DCAI) methods. The advantages and disadvantages of the three methods were compared and analyzed. Explosion suppression experiments on oil shale dust were carried out, and the explosion suppression mechanism was described. The explosion suppression process of the modified slag–NaHCO₃ composite powder explosion inhibitor for oil shale dust was found to involve a synergy of physical and chemical inhibition. This explosion suppression mechanism indicates three requirements for the preparation and application of industrial solid waste-based composite powder explosion inhibitors. The feasibility of preparing composite powder explosion inhibitors from waste incinerator slag was discussed from the experimental point of view and its explosion suppression performance on oil shale dust was studied with the intention of providing a new form of resource utilization for waste incinerator slag.

The risk assessment index system is usually established in the coal mine system, and contributes of different indexes are reflected by their weights. AHP is one of the most common methods, but experts are difficult to make accurate judgment for the relative importance of indexes by 1 to 9, that the interval could be used to express relative importance of the assessment index instead of the precise is more easy and reasonable. In order to make full use of the interval information of the certainty and uncertainty, the calculation methods of interval certainty weights and interval uncertainty weights of the risk assessment index system are discussed by introducing GSPA, and a subjective weight based on GSPA-IAHP is proposed. Application shows that the interval information is discussed dialectically from the certainty and uncertainty embodies fully scientific and comprehensive.

A large amount of waste dust will be produced in the process of metal grinding, resulting in a waste of resources and environmental pollution. Therefore, we present a new method of inerting waste aluminum (Al) alloy dust for recycling purposes. Three natural high polymers—starch, pectin, and hydroxypropyl cellulose—were selected to inert waste metal dust in order to prevent the alloy from hydrolyzing and keep the dust pure enough for reuse. The particles of the Al base alloy before and after dust reaction were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infra-red (FTIR), and the relevant reaction mechanism was clarified. The hydrogen evolution test indicated that, across the temperature interval of 313–333 K, 0.75 wt% pectin inerted hydrogen evolution most efficiently (90.125%). XRD analysis indicated that the inerted product is composed of Al monomer and Al₃Mg₂, with no detectable content of Al hydroxide. The purity of the Al alloy dust was preserved. SEM and FTIR analyses indicated that the -OH, -COOH, and -COOCH₃ functional groups in the high polymer participated in the coordination reaction by adsorbing on the surface of the waste Al alloy particles to produce a protective film, which conforms to Langmuir’s adsorption model. Verification of the inerted Al alloy dust in industrial production confirmed the possibility of reusing waste Al alloy dust. This study provides a simple and effective method for recycling waste Al alloy dust.