Zinc (Zn) ion supercapacitors (ZISCs) have attracted considerable attention as a viable energy storage technology because they are cost-effective, safe, and environmentally friendly. However, cathode materials with suitable properties are rare and need to be explored. In this regard, metal carbides (MXenes) are a good choice for capacitive energy storage, but they exhibit low capacitance. The energy storage performance of MXenes can be bossed using functionalization with heteroatom doping, e.g., nitrogen (N), to simultaneously modify ZISCs’ fundamental characteristics and electrochemical properties. Herein, we present an in-situ N-functionalization of Ti3C2Tx-MXene via a hydrothermal reaction with urea (denoted as N-Ti3C2Tx-MXene). N-functionalization into Ti3C2Tx-MXene raised Ti3C2Tx-MXene’s interlayer spacing and boosted the Zn-ion storage in 1 M ZnSO4 electrolyte. The N-Ti3C2Tx-MXene electrode delivered an excellent specific capacitance of 582.96 F/g at 1 A/g and retained an outstanding cycle stability of 94.62% after 5000 cycles at 10 A/g, which is 1.8 times higher than pristine Ti3C2Tx-MXene at identical conditions. Moreover, the N-Ti3C2Tx-MXene//Zn device demonstrated a maximum capacitance of 153.55 F/g at 1 A/g, retained 92% of its initial value after 5000 cycles, and its Coulombic efficiency was ~100%. This strategy considerably reduced Ti3C2Tx-MXene nanosheet restacking and aggregation and enhanced electrochemical performance. Further, this research elucidated N-Ti3C2Tx-MXene’s charge–storage process and offered a fresh approach to the rational design of novel electrode materials for ZISCs.
The advancement of using the cryogenic energy storage (CES) system has enabled efficient utilization of abandoned wind and solar energy, and the system can be dispatched in the peak hours of regional power load demand to release energy. It can fill the demand gap, which is conducive to the peak regulation of the power system and can further promote the rapid development of new energy. This study optimizes the various types of energy complementary to the CES system using hybrid gravitational search algorithm-local search optimization (hGSA-LS). First, the mathematical model of the energy storage system (ESS) including the CES system is briefly described. Second, an economic scheduling optimization model of the IES is constructed by minimizing the operating cost of the system. Third, the hGSA-LS methods to solve the optimization problem are proposed. Simulations show that the hGSA-LS methodology is more efficient. The simulation results verify the feasibility of CES compared with traditional systems in terms of economic benefits, new energy consumption rate, primary energy saving rate, and carbon emissions under different fluctuations in energy prices. Optimization of the system operation using the proposed hGSA-LS algorithm takes 5.87 s; however, the GA, PSO, and GSA require 12.56, 10.33, and 7.95 s, respectively. Thus, the hGSA-LS algorithm shows a comparatively better performance than GA, PSO, and GSA in terms of time.
Three new inorganic–organic hybrid nanocomposites (In–WO 3 @rGO, Mo–WO 3 @rGO, and Mn–WO 4 @rGO) were synthesized by hydrothermal method and applied for recoverable and efficacious ODS process of real oil. The physicochemical analysis of novel nanocatalysts was conducted by various techniques, i.e. , powder X-ray diffraction, fourier transform infrared spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy and thermogravimetric analysis. XRD and SEM analyses depicted that the nanoparticles (In–WO 3 , Mn–WO 4 , and Mo–WO 3 ) were well embellished on the exterior of reduced GO with an amazing morphology, having a crystallite size of less than 40 nm. The catalytic activity of nanocomposites was scrutinized for real fuel (diesel and kerosene) and model fuel (DBT) using the radical initiator mechanism of the ODS pathway. Excellent efficiency can be obtained under optimized conditions using 0.1 g catalyst, 1 mL oxidant (H 2 O 2 ), and100 ppm DBT at 40°C with a time duration of 180 min. Various factors such as time, DBT concentration, catalyst amount, oxidant amount, and temperature that affect catalytic activity directly or indirectly were also studied. A pseudo-first-order kinetics model was followed, and due to spontaneous reaction, a negative value of Δ G was observed with an activation energy of 6.54 kJ/mol for Mo–WO 3 @rGO, which is lower than that of the other two hybrids. The synthesized nanohybrids showed remarkable durability and recovery up to five times for the ODS process without significant change in proficiency.