Tao Fan

Dr. Tao Fan

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
QLQi Li
Qi Li
TFTao Fan
Tao Fan
XWXuhui Wen
Xuhui Wen
Iron loss resistance is widely used for rapid motor design and maximum efficiency control. However, the harmonic loss obviously increases during flux weakening, and even dominates in total iron loss, especially in deep flux weakening region. This paper presents an analytical calculation method of iron loss for an integral-slot interior permanent magnet synchronous machine (IPMSM) by iron loss resistance, considering harmonic effect during flux weakening. To predict the harmonic loss, both a harmonic loss voltage and a harmonic loss coefficient are employed into an iron loss resistance model, and the relation of harmonic loss to the harmonic voltage and coefficient are studied. The iron loss and efficiency of an integral-slot IPMSM are, respectively, obtained by the proposed model, the conventional model, the experiment, and finite-element analysis (FEA). The proposed model is validated by the comparison with FEA and experimental results.

9 May 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
HZHuixuan Zhang
Huixuan Zhang
TFTao Fan
Tao Fan
LMLiu Meng
Liu Meng
GJGuo Jing
Guo Jing
XWXuhui Wen
Xuhui Wen
This article presents an automatic parameter identification method based on ordinary least square (OLS) algorithm for deadbeat predictive current control (DPCC) to fulfill the purpose of high steady and dynamic performance in permanent magnet synchronous motor (PMSM) drives. Different from the conventional model, a novel model based on the polynomial estimation of flux linkage is constructed which takes the cross-saturation effects into account. First, the conventional mathematical model of PMSM and the proposed model are presented, respectively, and the inverter considering nonideal factors is also analyzed. Then the parameter identification method is investigated, in which the measurement procedure is delimited in advance and the automatic identification method is developed. Furthermore, a voltage reconstruction algorithm is applied to solve the inverter nonlinearities and the digital time-delay effect, so as to improve the accuracy of the identified parameters. Accordingly, a novel DPCC algorithm is presented based on the proposed model to achieve better performance. Finally, based on the concept and principles mentioned before, a detailed comparison of the DPCC based on the classical model considering the parameters’ variation and the modified model of the proposed method is carried out on a laboratory prototype.

16 August 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
XHXiaoshuang Hui
Xiaoshuang Hui
PNPuqi Ning
Puqi Ning
TFTao Fan
Tao Fan
YKYuhui Kang
Yuhui Kang
KWKai Wang
Kai Wang
YMYunhui Mei
Yunhui Mei
To meet stringent performance of electric vehicle controllers, it is highly needed to optimize the electrical and thermal performance for power semiconductor modules. As stacked DBC (Direct Bonded Copper) power modules have higher power density and enable the parallel of more chips, the demand for optimization is increasingly imperative. In this paper, an automated optimization method based on GA (genetic algorithm) and LBM (lattice Boltzmann method) was proposed for stacked DBC power modules with water-cooled PinFin heatsink. With proposed automatic generation method for electrical layout and heatsink structures, GA is used to select candidates. Because of the expanded optimization space, there is a growing requirement for faster and more precise evaluation methods. The proposed evaluation method based on LBM can assess layout parasitic inductance and the flow velocity and temperature distribution of power module with PinFin heatsink, which verifies an advantage in balancing speed and accuracy compared to traditional evaluation methods. According to optimization results, a 1200 V/ 1400 A, 16 chips in parallel, SiC MOSFET power module was fabricated in a standard EconoDUAL packaging size. Dynamic and static parameter testing as well as thermal testing were conducted, and experiment results demonstrate the effectiveness of proposed automatic optimization method.

Verified
Journal Article
Open access
PDF file
CSChengxu Sun
Chengxu Sun
QLQi Li
Qi Li
TFTao Fan
Tao Fan
Xuhui WenXuhui Wen
Xuhui Wen
YLYe Li
Ye Li
HLHongyang Li
Hongyang Li
Interior permanent magnet synchronous motors (IPMSMs) are widely applied as drive motors in electric vehicles because they have the advantages of high power density, high efficiency, and excellent dynamic performance. This paper introduces a framework for multi-objective optimization, tailored for the demands of V-Shaped IPMSMs, which involves high-dimensional variables. The framework is divided into three parts. Firstly, a proportional parametric finite element analysis (FEA) model for V-Shaped IPMSMs was established to reduce the probability of size interference among motor design parameters. Secondly, a surrogate model was trained using the design of experiments (DOE) approach and was utilized to substitute the FEA model. The accuracy of the surrogate model was then verified. Thirdly, the surrogate model was used as a fitness function, and a non-dominated sorting genetic algorithm II (NSGA-II) was employed as the optimization method to acquire the optimal goals rapidly. Based on the optimal design parameters, a prototype of the electrical motor was fabricated. Finally, the effectiveness of optimization was proven by experimental testing.

7 January 2022 in Symmetry
Verified
Journal Article
Open access
PDF file
GJGuo Jing
Guo Jing
TFTao Fan
Tao Fan
QLQi Li
Qi Li
Xuhui WenXuhui Wen
Xuhui Wen
An asymmetric, cross-coupling effect, as well as digital control delays, in a permanent-magnet synchronous motor (PMSM) will deteriorate its current-control performance in the high-speed range, especially for electric motors used in electric vehicles (EVs) with features such as high-power density and a low carrier/modulation frequency ratio. In this paper, an angle-compensating, complex-coefficient, proportional-integrator (ACCC-PI) controller is proposed, which aims to provide an excellent decoupling performance even with considerable digital control delay. Firstly, the current open and closed loop complex-coefficient transfer functions were established in the synchronous rotation coordinate system. The proposed method, along with existing ones, were then evaluated and theoretically compared. On this basis, the parameter-tuning method of the ACCC-PI controller was presented. Finally, simulation and experimental results proved the correctness of the theoretical analysis and the proposed method.

Verified
Journal Article
Open access
PDF file
YLYe Li
Ye Li
QLQi Li
Qi Li
TFTao Fan
Tao Fan
Xuhui WenXuhui Wen
Xuhui Wen
JXJunhui Xiong
Junhui Xiong
Ducted fan motors play a crucial role in promoting various applications of flying electric vehicles. In ducted fan motor systems, motor performance affects the speed of the fan, the flow field of the fan affects the thermal field of the motor, and the thermal field influences the performance of the motor. The coupling model between fan static thrust, motor power, and motor temperature rise is established in this paper. After confirming the external dimensions of the motor, three cooling schemes of the motor casing are designed. The casing forms are as follows: model 1 with smooth surface, model 2 with circular fins, and model 3 with longitudinal fins. The optimization work was carried out on the geometric dimensions of two types of fins for model 2 and model 3, and the static thrust and heat transfer performance of the motors were calculated. This study proposes that the ratio of thrust-to-temperature rise is an indicator for future optimization design of ducted fan motors. Model 3 with longitudinal fins has a higher thrust-to-temperature rise ratio. The thrust temperature rise in model 3 has increased by 24.77% compared to model 1.