The application of concrete containing mineral admixtures was attempted in Northwest China in this study, where the environment has the characteristics of low humidity and large temperature variation. The harsh environment was simulated by using an environmental chamber in the laboratory and four types of concrete were prepared, including ordinary concrete and three kinds of mineral admixture concretes with different contents of fly ash and blast-furnace slag. These concretes were cured in the environmental chamber according to the real curing conditions during construction. The compression strength, fracture properties, SEM images, air-void characteristics, and X-ray diffraction features were researched at the early ages of curing before 28 d. The results showed that the addition of fly ash and slag can improve the compression strength and fracture properties of concrete in the environment of low humidity and large temperature variation. The optimal mixing of mineral admixture was 10% fly ash and 20% slag by replacing the cement in concrete, which can improve the compression strength, initial fracture toughness, unstable fracture toughness, and fracture energy by 23.9%, 25.2%, 45.3%, and 22.6%, respectively, compared to ordinary concrete. Through the analysis of the microstructure of concrete, the addition of fly ash and slag can weaken the negative effects of the harsh environment of low humidity and large temperature variation on concrete microstructure and cement hydration.

The large temperature difference condition in Northwest China threatens a myriad of concrete structures during construction, with the daily temperature varying by around 40 °C. To investigate the macro-mechanical properties and microstructural characteristics of concrete containing different amounts of mineral admixtures under such harsh conditions, this investigation used an environmental chamber to simulate a saline soil erosion environment with a large temperature difference. Four types of concrete containing different proportions of fly ash and slag were prepared and exposed in the environmental chamber with a daily temperature change of −5~40 °C to investigate their compressive strength, flexural strength, and fracture properties. Moreover, the X-ray diffraction (XRD) characteristics, microscopic morphological characteristics, pore structure characteristics, and post-erosion chloride ion distribution characteristics were also observed and recorded. Results showed that the mineral admixture could improve the early strength development of the concrete and effectively improve the fracture performance of the concrete. The average compressive strength growth rate of concrete from day 3 to day 14 was 83.25% higher than that of ordinary concrete (OC) when 15% fly ash and 15% slag were added. In addition, the fracture energy of the concrete was maximized when 15% fly ash and 20% slag were added, which was 50.67% higher than that of OC; furthermore, the internal compactness and pore structure were optimized, and the resistance to saline soil erosion was strong. This provides a basis for the practical application of compounded mineral admixture-modified concrete in an arid environment with a large temperature difference and saline soil erosion.

The dramatic increase in urban construction waste poses severe environmental challenges. Utilizing waste concrete to produce recycled aggregates (RA) for manufacturing recycled concrete (RC) represents an effective strategy for resource utilization. However, inherent defects in RA, such as high porosity, microcracks, and adherent old mortar layers, lead to significant performance degradation of the resulting RC, limiting its widespread application. Traditional methods for enhancing RA often suffer from limitations, including high energy consumption, increased costs, or the introduction of new pollutants. MICP offers an innovative approach for enhancing RC performance. This technique employs the metabolic activity of specific microorganisms to induce the formation of a three-dimensionally interwoven calcium carbonate gel network within the pores and on the surface of RA. This gel network can improve the inherent defects of RA, thereby enhancing the performance of RC. Compared to conventional techniques, this approach demonstrates significant environmental benefits and enhances concrete compressive strength by 5–30%. Furthermore, embedding mineralizing microbial spores within the pores of RA enables the production of self-healing RC. This review systematically explores recent research advances in microbial mineral gel network for improving RC performance. It begins by delineating the fundamental mechanisms underlying microbial mineralization, detailing the key biochemical reactions driving the formation of calcium carbonate (CaCO₃) gel, and introducing the common types of microorganisms involved. Subsequently, it critically discusses the key environmental factors influencing the effectiveness of MICP treatment on RA and strategies for their optimization. The analysis focuses on the enhancement of critical mechanical properties of RC achieved through MICP treatment, elucidating the underlying strengthening mechanisms at the microscale. Furthermore, the review synthesizes findings on the self-healing efficiency of MICP-based RC, including such metrics as crack width healing ratio, permeability recovery, and restoration of mechanical properties. Key factors influencing self-healing effectiveness are also discussed. Finally, building upon the current research landscape, the review provides perspectives on future research directions for advancing microbial mineralization gel techniques to enhance RC performance, offering a theoretical reference for translating this technology into practical engineering applications.

Sorption-based Atmospheric water harvesting (AWH) technology can produce clean water even under low relative humidity (RH) conditions, providing a new direction for the development of future water production technologies. Beyond material innovation, advanced structural engineering is an important strategy to improve the performance of SAWH. In this study, we designed and fabricated a three-dimensional porous hydrogel composed of sodium alginate, gelatin, and carbon nanotubes loaded with lithium chloride (DSGC) in a customized grid architecture via 3D printing. By optimizing the grid dimensions, the hydrogel exhibited significantly improved water uptake and desorption performance compared to its bulk counterpart. Under 70% RH, the hydrogel achieved an sorption capacity reached 2.81 g g-1 within 12 h, and the desorption rate reached 1.89 kg m-2 within 2.5 h. After 7 cycles of sorption-desorption, the water sorption rate of the hydrogel showed no obvious decline, revealing great excellent repeatability. The hydrogel could realize atmospheric water harvesting in natural environments, and the collected water could promote the germination of lettuce seeds, exhibiting no significant biotoxicity. This excellent hydrogel structural design opens up a new avenue for improving water harvesting capacity.