Tangerine (Citrus reticulata. CRP) and grapefruit (Citrus paradisi. CPP) pectins obtained by ultrasound-assisted extraction (UAE) and conventional extraction (CE) using citric acid were characterized to establish their potential uses as an alternative source of commercial pectin. The pectins obtained by UAE and CE presented a pseudoplastic fluid characteristic with shear thinning behavior, a high esterification degree (CRP 82.30–71.81% and CPP 84.25–72.15%) and were of commercial quality based on galacturonic acid content (CRP 76.03% and CPP 76.03–71.01%). CPP presented greater viscosimetric molecular weight than CRP. Meanwhile, CRP presented greater polyphenol and protein content with respect CPP. The functional properties were influenced by citrus source and extraction method. UAE favored greater yields in a shorter time (CPP: 26.05%, 30 min; CRP: 13.46%, 15 min) compared to CE. UAE combined with the use of citric acid offers an effective alternative for obtaining high-quality pectins with lower polluting effluent, time and energy requirements.

Background: Coastal ecosystems are prone to hydrocarbon pollution due to human activities, and this issue has a tremendous impact on the environment, socioeconomic consequences, and represents a hazard to humans. Bioremediation relies on the ability of bacteria to metabolize hydrocarbons with the aim of cleaning up polluted sites.Methods: The potential of naturally occurring microbial communities as oil degraders was investigated in Sisal and Progreso, two port locations in the southeast Gulf of Mexico, both with a low level of hydrocarbon pollution. To do so, we determined the diversity and composition of bacterial communities in the marine sediment during the dry and rainy seasons using 16S rRNA sequencing. Functional profile analysis (PICRUTSt2) was used to predict metabolic functions associated with hydrocarbon degradation.Results: We found a large bacterial taxonomic diversity, including some genera reported as hydrocarbon-degraders. Analyses of the alpha and beta diversity did not detect significant differences between sites or seasons, suggesting that location, season, and the contamination level detected here do not represent determining factors in the structure of the microbial communities. PICRUTSt2 predicted 10 metabolic functions associated with hydrocarbon degradation. Most bacterial genera with potential hydrocarbon bioremediation activity were generalists likely capable of degrading different hydrocarbon compounds. The bacterial composition and diversity reported here represent an initial attempt to characterize sites with low levels of contamination. This information is crucial for understanding the impact of eventual rises in hydrocarbon pollution.

Hydrogen, electric energy production, and metal toxic bioremediation are some of the biotechnological applications of sulfate-reducing organisms, which potentially depend on the sulfide produced. In this study, offshore of Yucatan, the capacity to produce hydrogen sulfide using microbial consortia from marine sediment (SC469, PD102, SD636) in batch reactors was evaluated. Kinetic tests were characterized by lactate oxidation to acetate, propionate, CO₂ and methane. The inoculum SC469, located in open-ocean, differed strongly in microbial diversity and showed better performance in substrate utilization with the highest hydrogen sulfide production (246 mmolg⁻¹ VSS) at a specific hydrogen sulfide rate of 113 mmol g⁻¹ VSS d⁻¹ with a 0.79 molar ratio of sulfate/lactate. Sulfate-reducing microbial consortia enriched in the laboratory from marine sediments collected offshore in Yucatan and with a moderate eutrophication index, differed strongly in microbial diversity with loss of microorganisms with greater capacity for degradation of organic macromolecules. The sulfate-reducing microorganisms were characterized using Illumina MiSeq technology and were mainly Desulfomicrobium, Clostridium and Desulfobacter.

Currently, there is increasing interest and effort directed to developing sustainable processes, including in waste management and energy production and storage, among others. In this research, corn cobs were used as a substrate for the cultivation of Pleurotus djamor, a suitable feedstock for the management of these agricultural residues. Revalorization of this fungus, as an environmentally friendly carbon precursor, was executed by taking advantage of the intrinsic characteristics of the fungus, such as its porosity. Obtaining fungus-derived porous carbons was achieved by hydrothermal activation with KOH and subsequent pyrolysis at 600, 800, and 1000 °C in an argon atmosphere. The morphologies of the fungal biomass and fungus-derived carbons both exhibited, on their surfaces, certain amorphous similarities in their pores, indicating that the porous base matrix of the fungus was maintained despite carbonization. From all fungus-derived carbons, PD1000 exhibited the largest superficial area, with 612 m²g⁻¹ and a pore size between 3 and 4 nm recorded. Electrochemical performance was evaluated in a three-electrode cell, and capacitance was calculated by cyclic voltammetry; a capacitance of 60 F g⁻¹ for PD1000 was recorded. Other results suggested that PD1000 had a fast ion-diffusion transfer rate and high electronic conductivity. Ultimately, Pleurotus djamor biomass is a suitable feedstock for obtaining carbon in a sustainable way, and it features a defined intrinsic structure for potential energy storage applications, such as electrodes in supercapacitors.

This experiment aims to study the potential use of biochar derived from Sargassum spp. as an innovative ingredient in homemade soap, focusing on its antibacterial activity. The pyrolysis process was conducted at 700 °C with a heating rate of 10 °C min^-1 for 2 h under a nitrogen atmosphere with KOH chemical activation. The physicochemical properties of the biochar were investigated using XRD, FTIR, Raman, BET surface analysis, and SEM. Highly porous biochar was successfully synthesised, achieving a large specific surface area of 1600 m² g^-1 and a well-developed microporous structure distributed across the surface of the biochar. Klebsiella pneumoniae, Staphylococcus aureus, and Salmonella choleraesuis were used as model pathogens to evaluate the antibacterial activity of biochar-enriched homemade soap using Müeller-Hinton Agar and the Kirby-Bauer test. The antibacterial evaluations demonstrated that the incorporation of biochar into homemade soap partially inhibited the growth of these model pathogens bacteria.