The viscosity of a fluid is one of its basic physico-chemical properties. The modelling of this property as a function of temperature has been the subject of intensive studies. The knowledge of how viscosity and temperature variation are related is particularly important for applications that use the intrinsic friction of fluids to dissipate energy, for example viscous torsional vibration dampers using high viscosity poly(dimethylsiloxane) as a damping factor. This article presents a new method for approximating the dynamic viscosity of poly(dimethylsiloxane). It is based on the three-parameter Weibull function that far better reflects the relationship between viscosity and temperature compared with the models used so far. Accurate mapping of dynamic viscosity is vitally important from the point of view of the construction of viscous dampers, as it allows for accurate estimation of their efficiency in the energy dissipation process.

Methods for the synthesis of urethane acrylates used as new crosslinking agents for hydrophobic UV-curable powder clear coatings were developed. In the synthesis of urethane acrylates, isophorone diisocyanate, glycerin, xylitol, polyethylene glycol and polysiloxane KF-6000, as well as 2-hydroxyethyl acrylate or 2-hydroxyethyl methacrylate, were used. In order to increase the functionality of urethane acrylates, glycerin and xylitol derived from renewable sources were introduced. The chemical structure of the urethane acrylates was verified by IR spectroscopy. UV-curable powder clear coatings were obtained through a combination of urethane acrylates with unsaturated polyester resins. The thermal behavior and crosslinking density were examined using DMA. The obtained coatings were evaluated by performing the following tests: roughness, gloss, scratch resistance, hardness, adhesion to steel and water contact angle. As part of this research, high hydrophobicity and scratch resistance of UV-curable powder clear coatings were developed, which are a VOC-free and economically attractive alternative method for low thermal resistance surface protection, such as for composites, wood and wood-based materials.

The influence of different solvents, including aqueous and nonaqueous types, on the physicochemical properties of V₂O₅ nanostructures was thoroughly investigated. Various characterization techniques, such as XRD, XPS, FTIR, Raman spectroscopy, UV-vis DRS, SEM, TEM, and BET, were employed to analyze the obtained materials. Additionally, the adsorption properties of the synthesized V₂O₅ nanostructures for methylene blue were examined, and kinetic parameters of adsorption were calculated. The results demonstrate that the morphology of the obtained crystals can be finely controlled by manipulating water concentration in the solution, showcasing its profound impact on both the structural characteristics and adsorption properties of the nanostructures. Furthermore, the structural changes of the resulting V₂O₅ material induced by solvents show strong impacts on its photocatalytic properties, making it a promising photocatalyst.

The paper presents new reactive materials, namely marl and travertine, and their thermal modifications and the Polonite^® material, analyzing their phosphorus removal from water and wastewater by sorption. Based on the experimental data, an analysis of the factors influencing the sorption capacity of the materials, such as the material dose, pH of the initial solution, process temperature, surface structure, and morphology, was performed. Adsorption isotherms and maximum sorption capacities were determined with the use of the Langmuir, Freundlich, Langmuir–Freundlich, Tóth, Radke–Praunitz, and Marczewski–Jaroniec models. The kinetics of the phosphorus sorption process of the tested materials were described using reversible and irreversible pseudo-first order, pseudo-second order, and mixed models. The natural materials were the most sensitive to changes in the process conditions, such as temperature and pH. The thermal treatment process stabilizes the marl and travertine towards materials with a more homogeneous surface in terms of energy and structure. The fitted models of the adsorption isotherms and kinetic models allowed for an indication of a possible phosphorus-binding mechanism, as well as the maximum amount of this element that can be retained on the materials’ surface under given conditions—raw marl (43.89 mg P/g), raw travertine (140.48 mg P/g), heated marl (80.44 mg P/g), heated travertine (282.34 mg P/g), and Polonite^® (54.33 mg P/g).

Excessive blood loss is a leading cause of mortality among soldiers and accident victims. The wound healing process typically ranges from three weeks to several months, with disruptions in healing stages potentially prolonging recovery time. Chronic wounds may persist for years, creating a favorable environment for microbial growth. Chitosan, a derivative of chitin—the second most abundant biopolymer in nature—is obtained through deacetylation and exhibits mucoadhesive, analgesic, antioxidant, biodegradable, non-toxic, and biocompatible properties. Due to its hemostatic and regenerative support capabilities, chitosan is widely applied in the food, cosmetic, and agricultural industries; environmental protection; and as a key component in dressings for chronic wound healing. Notably, its antibacterial properties make it a promising candidate for novel biomaterials to replace traditional antibiotics and prevent the emergence of drug-resistant strains. The primary aim of this study was the chemical cross-linking of chitosan with the amino acids L-aspartic and L-glutamic acid in the presence of periclase (magnesium oxide) under microwave radiation conditions. Subsequent research stages involved the analysis of the samples’ physicochemical properties using SEM, FT-IR, XPS, atomic absorption spectrometry, swelling behavior (in water, SBF, and blood), porosity, and density. Biological assessments included biodegradation, cytotoxicity, and antibacterial activity against Escherichia coli and Staphylococcus aureus. The obtained results confirmed the high potential of the newly developed hemostatic agents for effective hemorrhage management under non-sterile conditions.