Recently, the reconfigurable intelligent surface (RIS), benefited from the breakthrough on the fabrication of programmable meta-material, has been speculated as one of the key enabling technologies for the future six generation (6G) wireless communication systems scaled up beyond massive multiple input multiple output (Massive-MIMO) technology to achieve smart radio environments. Employed as reflecting arrays, RIS is able to assist MIMO transmissions without the need of radio frequency chains resulting in considerable reduction in power consumption. In this paper, we investigate the joint design of transmit beamforming matrix at the base station and the phase shift matrix at the RIS, by leveraging recent advances in deep reinforcement learning (DRL). We first develop a DRL based algorithm, in which the joint design is obtained through trial-and-error interactions with the environment by observing predefined rewards, in the context of continuous state and action. Unlike the most reported works utilizing the alternating optimization techniques to alternatively obtain the transmit beamforming and phase shifts, the proposed DRL based algorithm obtains the joint design simultaneously as the output of the DRL neural network. Simulation results show that the proposed algorithm is not only able to learn from the environment and gradually improve its behavior, but also obtains the comparable performance compared with two state-of-the-art benchmarks. It is also observed that, appropriate neural network parameter settings will improve significantly the performance and convergence rate of the proposed algorithm.

Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low-power configuration, which has increased potential in enabling massive connectivity and low-latency communications. Accurate and low-overhead channel estimation in RIS-based systems is one of the most critical challenges due to the usually large number of RIS unit elements and their distinctive hardware constraints. In this paper, we focus on the uplink of a RIS-empowered multi-user Multiple Input Single Output (MISO) uplink communication systems and propose a channel estimation framework based on the parallel factor decomposition to unfold the resulting cascaded channel model. We present two iterative estimation algorithms for the channels between the base station and RIS, as well as the channels between RIS and users. One is based on alternating least squares (ALS), while the other uses vector approximate message passing to iteratively reconstruct two unknown channels from the estimated vectors. To theoretically assess the performance of the ALS-based algorithm, we derived its estimation Cramér-Rao Bound (CRB). We also discuss the downlink achievable sum rate computation with estimated channels and different precoding schemes for the base station. Our extensive simulation results show that our algorithms outperform benchmark schemes and that the ALS technique achieves the CRB. It is also demonstrated that the sum rate using the estimated channels always reach that of perfect channels under various settings, thus, verifying the effectiveness and robustness of the proposed estimation algorithms.

A revolutionary technology relying on Stacked Intelligent Metasurfaces (SIM) is capable of carrying out advanced signal processing directly in the native electromagnetic (EM) wave regime. An SIM is fabricated by a sophisticated amalgam of multiple stacked metasurface layers, which may outperform its single-layer metasurface counterparts, such as reconfigurable intelligent surfaces (RIS) and metasurface lenses. We harness this new SIM for implementing holographic multiple-input multiple-output (HMIMO) communications without requiring excessive radio-frequency (RF) chains, which is a substantial benefit compared to existing implementations. First of all, we propose an HMIMO communication system based on a pair of SIM at the transmitter (TX) and receiver (RX), respectively. In sharp contrast to the conventional MIMO designs, SIM is capable of automatically accomplishing transmit precoding and receiver combining, as the EM waves propagate through them. As such, each spatial stream can be directly radiated and recovered from the corresponding transmit and receive port. Secondly, we formulate the problem of minimizing the error between the actual end-to-end channel matrix and the target diagonal one, representing a flawless interference-free system of parallel subchannels. This is achieved by jointly optimizing the phase shifts associated with all the metasurface layers of both the TX-SIM and RX-SIM. We then design a gradient descent algorithm to solve the resultant non-convex problem. Furthermore, we theoretically analyze the HMIMO channel capacity bound and provide some fundamental insights. Finally, extensive simulation results are provided for characterizing our SIM-aided HMIMO system, which quantifies its substantial performance benefits, e.g., 150% capacity improvement over both conventional MIMO and its RIS-aided counterparts.

Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication systems is the concept of the holographic multiple-input multiple-output (HMIMO), which will actualize holographic radios with reasonable power consumption and fabrication cost. The HMIMO is facilitated by ultra-thin, extremely large, and nearly continuous surfaces that incorporate reconfigurable and sub-wavelength-spaced antennas and/or metamaterials. Such surfaces comprising dense electromagnetic (EM) excited elements are capable of recording and manipulating impinging fields with utmost flexibility and precision, as well as with reduced cost and power consumption, thereby shaping arbitrary-intended EM waves with high energy efficiency. The powerful EM processing capability of HMIMO opens up the possibility of wireless communications of holographic imaging level, paving the way for signal processing techniques realized in the EM-domain, possibly in conjunction with their digital-domain counterparts. However, in spite of the significant potential, the studies on HMIMO communications are still at an initial stage, its fundamental limits remain to be unveiled, and a certain number of critical technical challenges need to be addressed. In this survey, we present a comprehensive overview of the latest advances in the HMIMO communications paradigm, with a special focus on their physical aspects, their theoretical foundations, as well as the enabling technologies for HMIMO systems. We also compare the HMIMO with existing multi-antenna technologies, especially the massive MIMO, present various promising synergies of HMIMO with current and future candidate technologies, and provide an extensive list of research challenges and open directions for future HMIMO-empowered wireless applications.

In this paper, the problem of wireless resource allocation and semantic information extraction for energy efficient semantic communications over wireless networks with rate splitting is investigated. In the considered model, a base station (BS) first extracts semantic information from its large-scale data, and then transmits the small-sized semantic information to each user which recovers the original data based on its local common knowledge. At the BS side, the probability graph is used to extract multi-level semantic information. In the downlink transmission, a rate splitting scheme is adopted, while the private small-sized semantic information is transmitted through private message and the common knowledge is transmitted through common message. Due to limited wireless resource, both computation energy and transmission energy are considered. This joint computation and communication problem is formulated as an optimization problem aiming to minimize the total communication and computation energy consumption of the network under computation, latency, and transmit power constraints. To solve this problem, an alternating algorithm is proposed where the closed-form solutions for semantic information extraction ratio and computation frequency are obtained at each step. Numerical results verify the effectiveness of the proposed algorithm.