Ahmed Elsherbiny

Mr. Ahmed Elsherbiny

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
SFSiegfried Fürtauer
Siegfried Fürtauer
MHMostafa Hassan
Mostafa Hassan
AEAhmed Elsherbiny
Ahmed Elsherbiny
SGshaimaa kamel gabal
shaimaa kamel gabal
Sherif MehannySherif Mehanny
Sherif Mehanny
HAHatem Abushammala
Hatem Abushammala
Recent developments in the application of lignocellulosic materials for oil spill removal are discussed in this review article. The types of lignocellulosic substrate material and their different chemical and physical modification strategies and basic preparation techniques are presented. The morphological features and the related separation mechanisms of the materials are summarized. The material types were classified into 3D-materials such as hydrophobic and oleophobic sponges and aerogels, or 2D-materials such as membranes, fabrics, films, and meshes. It was found that, particularly for 3D-materials, there is a clear correlation between the material properties, mainly porosity and density, and their absorption performance. Furthermore, it was shown that nanocellulosic precursors are not exclusively suitable to achieve competitive porosity and therefore absorption performance, but also bulk cellulose materials. This finding could lead to developments in cost- and energy-efficient production processes of future lignocellulosic oil spillage removal materials.

1 May 2020 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
AEAhmed Elsherbiny
Ahmed Elsherbiny
MEMohamed K. El-Fawkhry
Mohamed K. El-Fawkhry
ASAhmed Y. Shash
Ahmed Y. Shash
TET. El-Hossany
T. El-Hossany

1 April 2019 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
AEAhmed Elsherbiny
Ahmed Elsherbiny
Ahmed Yehia ShashAhmed Yehia Shash
Ahmed Yehia Shash
MEMohamed Kamal El-Fawkhry
Mohamed Kamal El-Fawkhry
TETarek M. El-Hossainy
Tarek M. El-Hossainy
TMTaha Mattar
Taha Mattar
TRIP effect containing steel was well reputed by its high mechanical properties among the 1st generation of Advanced High Strength Steel. High Silicon content was well established as an inhibitor for cementite precipitation at para-equilibrium condition. However, the effect of manganese as a powerful stabilizer for retained austenite was not much studied in TRIP-Steel. Thereby, the effect of high manganese content on the TRIP containing steel is studied in this research. As been observed from OM, and XRD results, it was found that as long as increasing Manganese content, the fraction of retained austenite increases. No doubt that enrichment of retained austenite throughout the matrix, beers a great impact on the plastic deformation character of the investigated steels, which was proved by using a uniaxial tensile test and determining the strain hardening exponent.

1 March 2020 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
AEAhmed Elsherbiny
Ahmed Elsherbiny
MEMohamed Kamal El-Fawkhry
Mohamed Kamal El-Fawkhry
Ahmed Yehia ShashAhmed Yehia Shash
Ahmed Yehia Shash
TETarek M. El-Hossainy
Tarek M. El-Hossainy
AFAyman Mohamed Fathy
Ayman Mohamed Fathy
TMTaha Mattar
Taha Mattar
Despite that the conventional CSiMn TRIP steel has a promissing mechanical attributes, it has a limitations on the galvanizability of such grades of steel due to Silicon. Thus, aluminum as a strong candidate for substituting silicon has been introduced in this study accompanied by vanadium as a microalloying element. Microstructure of the studied steel was observed by using OM, and SEM. X-ray diffraction analysis, and tent-etching technique carried out on the studied steel to identify the fractions of the retained Austenite after thermal mechanical process, as well as its morphology. In addition, the mechanical properties in term of strength, ductility, strain hardening, and the rate of strain hardening were studied to define the influenced parameters throughout this alteration. The results refer to the possibility of complete replacement of silicon in TRIP steel with aluminum at the presence of vanadium as a micro alloying element.

10 May 2021 in Solid State Phenomena
Verified
Journal Article
Closed access
PDF file
MEMohamed Kamal El-Fawkhry
Mohamed Kamal El-Fawkhry
AFAyman Mohamed Fathy
Ayman Mohamed Fathy
AEAhmed Elsherbiny
Ahmed Elsherbiny
Tempcore process considers the widest process that is being used in the production of reinforced steel rebar. The normal tempcore process is fundamentally dependent on the amount of latent heat in the core of the steel rebar, and the cooling rate of the rebar cross-section. Cooled water box and the cooling bed have a powerful effect on the cooling rate of the steel rebar. This research has been designed to monitor the continuous cooling transformation CCT diagram of steel rebar with different two contents of residual elements. Moreover, the effect of the cooling bed’s conditions has been simulated to identify the effect of cooling rate at the cooling bed step on the microstructure, as well as the hardness value of the produced steel rebar. It was found that the cooling rate at the cooling bed step has a great powerful effect on the produced steel rebar in term of bainite phase increment, and the hardness value as well.

Verified
Journal Article
Open access
PDF file
AEAhmed Elsherbiny
Ahmed Elsherbiny
AMAbdullah Mohiuddin
Abdullah Mohiuddin
SDShirin Dehgahi
Shirin Dehgahi
Pierre MertinyPierre Mertiny
Pierre Mertiny
AQAhmed Jawad Qureshi
Ahmed Jawad Qureshi
Fused filament fabrication (FFF) is a widely used additive manufacturing technique that enables the rapid, layer-by-layer creation of parts. However, its traditional planar deposition approach can produce strong material anisotropy in terms of moduli and strengths, especially when fiber-reinforced polymers are processed. These characteristics limit the application of FFF in high-performance fields. This study introduces a novel FFF printing technique, termed z-stitching, which incorporates interlocking stitch patterns to enhance interlayer interaction and reduce anisotropy. A z-stitching algorithm was developed to explain the toolpath and material deposition. Using polymer filaments, samples employing the z-stitching technique were produced as a proof of concept. Moreover, experiments were conducted to explore the mechanical properties of samples made using z-stitching. Test results in terms of moduli and strengths in different principal material directions, as well as an isotropy ratio, were contrasted with the mechanical properties of samples made using traditional FFF. The experiments showed an overall enhanced mechanical performance of parts made using z-stitching. A printing time analysis was also performed, revealing that z-stitching printing time is approximately 14% longer than that of the comparable traditional FFF processes. This study establishes a foundation for the further optimization of z-stitching and its adoption in industrial-scale additive manufacturing for structures in high-performance applications.