With their relative ease of production and coupled strong surface functionality and electrical conductivity properties, graphene oxide (GO) and reduced graphene oxide (rGO) are exciting, yet overlooked, graphene-like additive prospects for activated carbon (AC) electrodes in supercapacitors. In this work, we incorporated small amounts of synthesized GO and rGO in AC electrodes via a simple mixing procedure to explore their effects. In addition to materials characterizations, symmetric supercapacitors were made from these electrodes and tested across current densities ranging from 0.1–10 A g−1 and across 10,000 additional charge-discharge cycles at 2 A g−1. Performance measurements indicate that GO and rGO enhance the rate resistance and capacity, respectively, of AC electrodes, but these effects are modest and do not prevent increases in internal resistance over the course of 10,000 cycles. The overall ineffectuality of GO and rGO is reasoned to be due to their isolation and infrequency as a result of the relatively impotent distribution method used.
All-solid-state batteries (ASSBs) are gaining traction in the arena of energy storage due to their promising results in producing high energy density and long cycle life coupled with their capability of being safe. The key challenges facing ASSBs are low conductivity and slow charge transfer kinetics at the interface between the electrode and the solid electrolyte. Garnet solid-state electrolyte has shown promising results in improving the ion conductivity but still suffers from poor capacity retention and rate performance due to the interfacial resistance between the electrodes. To improve the interfacial resistance, we prepared a composite consisting of Li7La2.75Ca0.25Zr1.75Nb0.25O12 (LLCZN) garnet material as the ceramic, polyethylene oxide (PEO) as the polymer, and lithium hexafluorophosphate (LiPF6) as the salt. These compounds are mixed in a stoichiometric ratio and developed into a very thin disc-shaped solid electrolyte. The LLCZN provides a lithium-ion transport path to enhance the lithium-ion conduction during charging and discharging cycles, while the LiPF6 contributes more lithium ions via the transport path. The PEO matrix in the composite material aids in bonding the compounds together and creating a large contact area, thereby reducing the issue of large interfacial resistance. FESEM images show the porous nature of the electrolyte which promotes the movement of lithium ions through the electrolyte. The fabricated LLCZN/PEO/LiPF6 solid-state electrolyte shows outstanding electrochemical stability that remains at 130 mAh g−1 up to 150 charging and discharging cycles at 0.05 mA cm−2 current. All the specific capacities were calculated based on the mass of the cathode material (LiCoO2). In addition, the coin cell retains 85% discharge capacity up to 150 cycles with a Coulombic efficiency of approximately 98% and energy efficiency of 90% during the entire cycling process.
18 July 2020 in Atlas Journal of Materials Science
Li2FeMn3O8 (LFMO) nanocomposite material for Li-ion battery is synthesized using chemical combustion method. To fabricate a hybrid nanostructure electrode, LFMO is coated on tin oxide (SnO2) nanorods (NR), which is grown using a vapor-liquid solid (VLS) technique on a steel substrate. The surface morphology of the hybrid nanostructure electrode confirms that, single crystalline SnO2 nanorods are grown vertically with spine-like structures, a few microns in length, as evident from field emission scanning electron microscope image. The electrochemical performance of SnO2/LFMO shows very interesting characteristic with enormous charge storage capability. The coin cell shows improved capacity with a higher number of charging and discharging cycles. This SnO2/LFMO hybrid composite electrode shows better specific capacitance value as compared to the pristine SnO2 electrode.