Large area highly crystalline MoS2 and WS2 thin films were successfully grown on different substrates using radio-frequency magnetron sputtering technique. Structural, morphological and thermoelectric transport properties of MoS2, and WS2 thin films have been investigated systematically to fabricate high-efficient thermal energy harvesting devices. X-ray diffraction data revealed that crystallites of MoS2 and WS2 films are highly oriented in 002 plane with uniform grain size distribution confirmed through atomic force microscopy study. Surface roughness increases with substrate temperature and it plays a big role in electron and phonon scattering. Interestingly, MoS2 films also display low thermal conductivity at room temperature and strongly favors achievement of higher thermoelectric figure of merit value of up to 1.98. Raman spectroscopy data shows two distinct MoS2 vibrational modes at 380 cm−1 for E12g and 410 cm−1 for A1g. Thermoelectric transport studies further demonstrated that MoS2 films show p-type thermoelectric characteristics, while WS2 is an n-type material. We demonstrated high efficient pn-junction thermoelectric generator device for waste heat recovery and cooling applications.
The addition of suitable metallic dopants into the indium or zinc oxide matrix is essential to obtain transparent conducting oxide (TCO) thin films for high-performance optoelectronics devices. However, scarcity of indium is one of the major challenges for the common use of indium doped tin oxide (ITO) as a TCO material for future state-of-the-art devices. To overcome the challenge, doped zinc oxide is used an alternative material for traditional ITO and retains both high transparency and electrical conductivity. One such potential material is gallium-doped zinc oxide (GZO). GZO thin films were deposited onto glass as well as Kapton substrates using the pulsed laser deposition technique. Structural, optical, and electro-thermal properties of these films were studied to assess the performance of the films as thin-film transparent heaters. The samples show a good transmittance value greater than 85% in the visible range of the electromagnetic spectrum. At room temperature, the electrical resistivity of GZO films showed a value of 110.46 × 10−4 cm on glass and 2.90 × 10−4 cm on the Kapton substrate, followed by a Joule heating effect, with temperatures reaching more than 120 °C at an applied voltage of ∼12 V. This high transparency, cost-effectiveness, low sheet resistance, and small surface roughness make GZO a unique and potential candidate for various practical applications not only as a transparent electrode but also as an indium free thin-film transparent heater and an affordable transparent conducting oxide in displays.
Recent advancements in computing technologies coupled with the need to make sense of large amounts of raw data have renewed much interest in data-driven materials design and discovery. Traditional materials science research relies heavily on experimental data to gauge the properties of materials. However, this paradigm is purely based on trial and error and ongoing research can take decades to discover new materials. Data-driven modeling tools such as machine learning and its proven libraries can help speed up the materials’ discovery process through the implementation of powerful algorithms on readily available material datasets mined from the ever-increasing private- and government-funded material databases. In this Perspective, we applied various machine learning models on tens of hundreds of thermoelectric compounds obtained from density functional theory calculation results. In our preliminary analysis, we made use of pymatgen and the powerful materials science library matminer to add and explore key material features that have the propensity to accurately predict our achievable target output. We evaluated the accuracy and performance of our models with the coefficient of determination (R2), the root mean square error, and K-fold cross-validation metrics and identified the most important descriptors for our materials. Finally, we reviewed the current state-of-the-art in data-driven thermoelectric materials’ design and discovery, its current challenges, and prospects.
With their relative ease of production and coupled strong surface functionality and electrical conductivity properties, graphene oxide (GO) and reduced graphene oxide (rGO) are exciting, yet overlooked, graphene-like additive prospects for activated carbon (AC) electrodes in supercapacitors. In this work, we incorporated small amounts of synthesized GO and rGO in AC electrodes via a simple mixing procedure to explore their effects. In addition to materials characterizations, symmetric supercapacitors were made from these electrodes and tested across current densities ranging from 0.1–10 A g−1 and across 10,000 additional charge-discharge cycles at 2 A g−1. Performance measurements indicate that GO and rGO enhance the rate resistance and capacity, respectively, of AC electrodes, but these effects are modest and do not prevent increases in internal resistance over the course of 10,000 cycles. The overall ineffectuality of GO and rGO is reasoned to be due to their isolation and infrequency as a result of the relatively impotent distribution method used.
The metal-to-insulator transition (MIT) closest to room temperature of 68–70 °C as shown by vanadium oxide (VO2), compared with other transition metal oxides, makes it a potential candidate for smart window coating. We have successfully fabricated a potential smart window device after the optimum design of a multilayered thin film structure made out of transparent conducting oxide (aluminum doped zinc oxide) and pure VO2 using pulsed laser deposition technique. This comprehensive study is based on two different configurations for multi-layered structure approach, with the intention to reduce the transition temperature, as well as to maintain the MIT properties that would strengthen the potential of the structure to be used for a smart window device. By creating a multi-layered structure, we were able to create a low powered device that can operate less than 15 V that leads to significant decline in the infrared transmission by a magnitude of over 40% and provided sufficient heat to trigger the MIT at a temperature around 60 °C, which is almost 10 °C lower than its bulk counterpart. This finding would positively impact the research on VO2 thin films, not only as smart windows but also for numerous other applications like bolometers, infrared detectors, Mott transistors and many more.