With their relative ease of production and coupled strong surface functionality and electrical conductivity properties, graphene oxide (GO) and reduced graphene oxide (rGO) are exciting, yet overlooked, graphene-like additive prospects for activated carbon (AC) electrodes in supercapacitors. In this work, we incorporated small amounts of synthesized GO and rGO in AC electrodes via a simple mixing procedure to explore their effects. In addition to materials characterizations, symmetric supercapacitors were made from these electrodes and tested across current densities ranging from 0.1–10 A g−1 and across 10,000 additional charge-discharge cycles at 2 A g−1. Performance measurements indicate that GO and rGO enhance the rate resistance and capacity, respectively, of AC electrodes, but these effects are modest and do not prevent increases in internal resistance over the course of 10,000 cycles. The overall ineffectuality of GO and rGO is reasoned to be due to their isolation and infrequency as a result of the relatively impotent distribution method used.
All-solid-state batteries (ASSBs) are gaining traction in the arena of energy storage due to their promising results in producing high energy density and long cycle life coupled with their capability of being safe. The key challenges facing ASSBs are low conductivity and slow charge transfer kinetics at the interface between the electrode and the solid electrolyte. Garnet solid-state electrolyte has shown promising results in improving the ion conductivity but still suffers from poor capacity retention and rate performance due to the interfacial resistance between the electrodes. To improve the interfacial resistance, we prepared a composite consisting of Li7La2.75Ca0.25Zr1.75Nb0.25O12 (LLCZN) garnet material as the ceramic, polyethylene oxide (PEO) as the polymer, and lithium hexafluorophosphate (LiPF6) as the salt. These compounds are mixed in a stoichiometric ratio and developed into a very thin disc-shaped solid electrolyte. The LLCZN provides a lithium-ion transport path to enhance the lithium-ion conduction during charging and discharging cycles, while the LiPF6 contributes more lithium ions via the transport path. The PEO matrix in the composite material aids in bonding the compounds together and creating a large contact area, thereby reducing the issue of large interfacial resistance. FESEM images show the porous nature of the electrolyte which promotes the movement of lithium ions through the electrolyte. The fabricated LLCZN/PEO/LiPF6 solid-state electrolyte shows outstanding electrochemical stability that remains at 130 mAh g−1 up to 150 charging and discharging cycles at 0.05 mA cm−2 current. All the specific capacities were calculated based on the mass of the cathode material (LiCoO2). In addition, the coin cell retains 85% discharge capacity up to 150 cycles with a Coulombic efficiency of approximately 98% and energy efficiency of 90% during the entire cycling process.
Pyrite (FeS2) thin films have attracted significant attention as promising cathode materials for lithium-ion batteries due to their high theoretical capacity, natural abundance, and environmental benignity. However, due to sulfur volatility during film deposition, achieving stoichiometric FeS2 remains challenging. In this study, we investigate the effects of post-deposition sulfurization treatment on the chemical composition, crystal structure, and electrochemical performance of FeS2 thin films synthesized by RF magnetron sputtering. The as-deposited films exhibit notable sulfur deficiency, with an S: Fe atomic ratio of 0.27:1, while a 4-hour sulfurization process improves the ratio to 1.97:1, approaching ideal stoichiometry. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirm the formation of the pyrite phase, and X-ray diffraction (XRD) and field effect emission scanning electron microscopy (FESEM) reveal enhanced crystallinity and polycrystalline growth. Electrochemical analysis using cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) demonstrates that sulfurized films deliver superior initial and long-term (100-cycle) discharge specific capacities compared to as-deposited samples. The improved performance is attributed to optimized surface stoichiometry, increased reducibility, and the formation of stable intermediate phases. These findings underscore the critical role of sulfurization in tuning the structural and electrochemical properties of FeS2 thin-film cathodes and present a viable strategy for enhancing the performance and stability of conversion-type cathodes in lithium-ion batteries.