The results of the high-field technique for obtaining and testing the carbyne strength in situ are presented. By using molecular dynamics simulation and ab initio calculations, a comprehensive analysis of the results is executed. High-field technique for experimental measurement of the carbyne strength in situ is briefly described. It is shown that the technique used gives a lower estimation for strength of carbyne, which equals 251 GPa at T = 77 K. This value is close to the strength 7.85 nN (250 GPa) of contact atomic bond between carbyne and graphene sheet, from which the monatomic chain is pulled. The strength of carbyne itself is determined by strength of an edge atomic bond and it is ≈ 12.35 nN (393 GPa) at T = 0 K. For carbynes containing more than 10 to 12 atoms, the coefficient of elasticity (k Y = 145.40 nN) and the elastic modulus (Y = 4631 GPa) are ascertain.
An approach is developed to predict stability of carbyne-based nanodevices. Within this approach, the thermo-fluctuation model of instability and break of contact bond in nanodevices, containing carbyne chains and graphene sheets, is offered. Unlike the conventional models, it does not include empirical constants. The results of DFT calculations are used as initial data for this model. Possibility of synergistic effect of temperature and mechanical load on stability and value of service time of carbyne-based nanodevices is predicted. It is ascertained, that this synergism results in a significant (by many orders of magnitude) decrease in the lifetime of nanodevices containing carbyne chains. The atomic mechanism of this phenomenon is outlined. Conditions of thermo-force loading are predicted at which a service time of these devices is sufficient for applications.
30 September 2004 in Theoretical and Applied Fracture Mechanics
Experimental value of strength of nano-sized crystal under uniform triaxial (hydrostatic) tension was obtained for the first time. Strength was measured by in situ high-field mechanical testing of tungsten defect-free nano-sized specimen carried out inside a field-ion microscope. At temperature 77 K, this strength is 28 ± 3 GPa. Based on the MD simulation findings, it is ascertained that under these conditions the instability of an entire nano-sized specimen (global instability) is initiated by the Bain transition within a local region of the specimen. The model of ‘fluctuation-induced Bain transition’ is offered. Within the framework of the model proposed, it is exhibited that possibility of realisation of such local Bain transition under global hydrostatic tension is due to the fluctuation of local tensile stresses. In general, it is shown that fluctuation-induced Bain transition governs the level of the strength of nano-sized bcc crystals under hydrostatic tension.
Regularities of the temperature effect on yield strength of nanosized tungsten crystals are ascertained. Experimental values of the yield strength of nanoneedles in the direction [1 1 0] are obtained using the high-field technology at the temperature range 17,4–862 K. It is found that in this range, decrease in strength of tungsten nanoneedles is about 30%. So low, compared with ordinary single crystals, susceptibility of nanoneedles’ strength to change in temperature is due to specific feature of mechanism of transition from elastic to plastic deformations in defect-free nanocrystals. To analyse this mechanism, molecular dynamic simulation of tensile of tungsten nanowire over the temperature range 3–2400 K has been utilized. The thermal fluctuation model of the temperature effect on the strength of nanosized crystals is offered.