Anne-Julie Tinet

Dr. Anne-Julie Tinet

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 August 2019 in Soil Research
Verified
Journal Article
Closed access
PDF file
CDC. Duwig
C. Duwig
BPB. Prado
B. Prado
ATAnne-Julie Tinet
Anne-Julie Tinet
PDPatrice Delmas
Patrice Delmas
NFNicola Dal Ferro
Nicola Dal Ferro
FMF. Morari
F. Morari
Volcanic soils are important resources because of their unique mineralogical and physical characteristics, and allophanic Andosols represent some of the world’s most fertile soils. However, their unique properties can be lost when cultivated. Most soils in the Central Valley, Mexico, are derived from volcanic materials. This valley encompasses one of the largest water supply systems in the world by volume, but is affected by soil degradation and deforestation. Sustainably managing volcanic soils requires understanding how land use affects their hydrodynamic properties. Gas adsorption and mercury intrusion porosimetry, water retention curves, tension infiltrometry and X-ray tomography were used to describe pore structure characteristics. Two volcanic soils (one Andosol and one derived from indurated tuff – Tepetates), three land uses (maize monoculture, maize–wheat rotation and fallow) and two horizons (Ap and A2 for maize monoculture and maize–wheat rotation) were studied. Tillage affected topsoil by increasing the sand fraction by 38% and decreasing total porosity and macroporosity by 23% and 40% respectively. Macropore size was reduced and the number of isolated macropores was higher in the tilled layer under maize, compared with untilled subsoil. The plot under maize–wheat rotation had lower allophane content, and saturated hydraulic conductivity was reduced by nearly an order of magnitude and water retention by half, compared with maize and fallow plots. Compared with Andosols, Tepetates showed differences in mineralogical composition with lower contents of amorphous compounds and in its porous network characteristics with twice the total and percolating macroporosity compared with the maize plot. Its high content of organic carbon (3.5%) seemed beneficial for its hydrodynamic properties. Sustainable agricultural management of these volcanic soils requires reducing mechanised tillage, avoiding periods when soil is bare, not applying maize–wheat rotation and applying maize–fallow rotation allowing natural vegetation growth.

19 November 2020 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Open access
PDF file
AAA. W. A. Ahoulou
A. W. A. Ahoulou
ATAnne-Julie Tinet
Anne-Julie Tinet
COC. Oltéan
C. Oltéan
FGFabrice Golfier
Fabrice Golfier
Predicting the instabilities that occur during the chemical reaction between a percolating fluid and a soluble rock leading to the development of macroscopic channels called wormholes is a key for understanding many geological processes. Their shape and their spatial distribution depend on two dimensionless numbers, namely Damköhler (Da) and Péclet (Pe) numbers. Although the dissolution phenomenon has been extensively studied both in the context of acid stimulation of oil wells in carbonate rocks and carbon capture and storage, few works have focused on the influence of the physical properties of fluids on wormhole patterns. Consequently, through interpretation of images acquired during the injection of pure water into a 2‐D reconstituted salt massif and considering different configurations of injection, we illustrate the buoyancy effects on wormhole formation. Contrarily to observation in fractures, experimental results suggest that dissolution regimes can still be described by the classical dimensionless numbers Da and Pe. As for the regime diagram, it remains practically unchanged for strong Péclet and weak Damköhler and undergoes a slowdown of the propagation of the dissolution front when the number of Richardson's increases. Analysis of morphological descriptors such as area, interface, and tortuosity shows that density contrast has an influence on intermediate‐ to high‐Richardson dissolution regimes that may be explained by the existence of buoyancy effects.

15 September 2021 in Technologies
Verified
Journal Article
Open access
PDF file
RBRomain Bedell
Romain Bedell
AHAlaa HASSAN
Alaa HASSAN
ATAnne-Julie Tinet
Anne-Julie Tinet
Javier A Arrieta-EscobarJavier A Arrieta-Escobar
Javier A Arrieta-Escobar
DDDelphine Derrien
Delphine Derrien
Joshua M. PearceJoshua M. Pearce
Joshua M. Pearce
Three-dimensional (3D) printing in soil science is relatively rare but offers promising directions for research. Having 3D-printed soil samples will help academics and researchers conduct experiments in a reproducible and participatory research network and gain a better understanding of the studied soil parameters. One of the most important challenges in utilizing 3D printing techniques for soil modeling is the manufacturing of a soil structure. Until now, the most widespread method for printing porous soil structures is based on scanning a real sample via X-ray tomography. The aim of this paper is to design a porous soil structure based on mathematical models rather than on samples themselves. This can allow soil scientists to design and parameterize their samples according to their desired experiments. An open-source toolchain is developed using a Lua script, in the IceSL slicer, with graphical user interface to enable researchers to create and configure their digital soil models, called monoliths, without using meshing algorithms or STL files which reduce the resolution of the model. Examples of monoliths are 3D-printed in polylactic acid using fused filament fabrication technology with a layer thickness of 0.20, 0.12, and 0.08 mm. The images generated from the digital model slicing are analyzed using open-source ImageJ software to obtain information about internal geometrical shape, porosity, tortuosity, grain size distribution, and hydraulic conductivities. The results show that the developed script enables designing reproducible numerical models that imitate soil structures with defined pore and grain sizes in a range between coarse sand (from 1 mm diameter) to fine gravel (up to 12 mm diameter).

1 February 2024 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
NANathan Amrofel
Nathan Amrofel
MDMagdalena Dymitrowska
Magdalena Dymitrowska
AOAmaël Obliger
Amaël Obliger
ATAnne-Julie Tinet
Anne-Julie Tinet
FGFabrice Golfier
Fabrice Golfier
Understanding drying processes in nanoporous media is of great importance in many technological and industrial situations. To better understand how gas moves through clayey rocks, of interest for underground disposal of radioactive wastes, we propose using pore-scale direct numerical simulations. In this study, we use the Smoothed Particle Hydrodynamics method, which has proved to be an effective approach for simulating complex fluid dynamics within porous media at the nanoscale. Our simulations consider capillary-dominated two-phase flow with evaporation and condensation at liquid–gas interfaces, coupled to the diffusion of water vapor in the gas phase, as well as the Kelvin effect, which is a specific feature of nanopores. Our evaporation-condensation model is validated against analytical solutions. The size of the compact support of kernel function and the particle density required to obtain accurate and stable results of capillary pressure are investigated. Drying regimes, capillary-driven and evaporated-driven, are explored. A specific effort is made to highlight the influence of the Kelvin effect on desaturation and the creation of preferential paths for gas flow as well as its impact on drying rate. The role of condensation due to local vapor concentration conditions is also emphasized.

22 February 2019 in Soil Research
Verified
Journal Article
Closed access
PDF file
KMKarin Mueller
Karin Mueller
CDCéline Duwig
Céline Duwig
ATAnne-Julie Tinet
Anne-Julie Tinet
AGAlfonso Gastelum-Strozzi
Alfonso Gastelum-Strozzi
LSLorenzo Spadini
Lorenzo Spadini
PCPascal Charrier
Pascal Charrier
Sustainable horticulture depends on the integrity of soil functions, which directly depend on soil architecture affecting aggregation, root growth, as well as liquid and gas permeability. We hypothesised that changes in soil architecture resulting from feedback mechanisms between management, soil organic carbon contents (SOC), biota and vegetation can be captured with X-ray computed tomography (CT), and that these affect the soil filtering function, which thus, can be manipulated through orchard management. We compared the transport of copper, a widely used fungicide, through intact soil cores from vine rows of kiwifruit orchards under organic and integrated management. We first derived 3D-macropore characteristics from CT-images, followed by leaching a pulse of copper and a tracer through the same cores. The organic orchard soil had a significantly higher SOC content than the integrated orchard soil, and this was positively correlated with total porosity. Macropores (>92 µm) were larger with a higher connectivity, but significantly fewer in the organic than the integrated orchard soil. This resulted in a lower macroporosity and a better copper filtering capacity of the organic than the integrated orchard soil. Copper distribution was reasonably predicted when combining SOC contents, pH and macropore characteristics. Significant relationships between soil parameters and indicators of the strength of preferential flow verified that CT-derived macropore characteristics can be used to predict functional solute transport parameters. The relevance of our results and relationships observed between macropore characteristics, functional indicators of preferential flow and the fate of copper needs verification with samples representing more soils and sites.

30 March 2026
Verified
Thesis
Closed access
ATAnne-Julie Tinet
Anne-Julie Tinet
Les Installations de Stockage des Déchets Non Dangereux modernes nécessitent pour satisfaire les enjeux environnementaux, sanitaire et / ou économiques une gestion contrôlée des effluents liquides et gazeux. Le travail réalisé dans cette thèse porte sur la compréhension et la modélisation numérique des phénomènes de transferts de fluides avec une attention particulière pour les différents procédés mis en oeuvre durant l'exploitation des sites (injection de liquide, récupération de liquide et gaz). Pour chacune des trois applications étudiées, les phénomènes physiques majeurs sont identifiés ainsi que les échelles de temps et d'espace associées de manière à pouvoir proposer des versions simplifiées d'un modèle général. Ceci permet en particulier de renseigner ces modèles par des données principalement expérimentales. Un attachement particulier est porté au caractère hétérogène et déformable du matériau déchet. La description fine de l'injection de lixiviat nécessite une description de type double milieu associée à un modèle d'écoulements préférentiels. Ce type d'écoulement est peu favorable à une augmentation de l'humidité du milieu en conditions gravitaires. Concernant le pompage, le milieu semble réagir comme un milieu homogène mais un comportement hystérétique spécifique au matériau est mis en évidence. Enfin, la prise en compte de la déformabilité du déchet conduit à la prédiction d'une structure d'écoulement originale lors du captage de biogaz.