The urbanization process contributes to the growth of solid waste generation and causes an increase in environmental impacts and failures in the management of solid waste. The number of dumps is a concern due to the limited implementation and safe disposal of this waste. The interest in sustainable techniques has been growing in relation to waste management, which is largely absorbed by the civil construction sector. This work aimed to review plastic waste, especially polyethylene terephthalate (PET), that can be incorporated with construction materials, such as concrete, mortars, asphalt mixtures, and paving. The use of life-cycle assessment (LCA) is related, as a tool that allows the sustainability of products and processes to be enhanced in the long term. After analyzing the recent literature, it was identified that studies related to plastic wastes in construction materials concentrate sustainability around the alternative destination of waste. Since the plastic waste from different production chains are obtained, it was possible to affirm the need for a broader assessment, such as the LCA, providing greater quantification of data making the alternative processes and products more sustainable. The study contributes to enhance sustainability in alternative building materials through LCA.

The ever-growing consumption and improper disposal of non-biodegradable plastic wastes is bringing worrisome perspectives on the lack of suitable environmentally correct solutions. Consequently, an increasing interest in the circular economy and sustainable techniques is being raised regarding the management of these wastes. The present work proposes an eco-friendly solution for the huge amount of discarded polyethylene terephthalate (PET) wastes by addition into soil-cement bricks. Room temperature molded 300 × 150 × 70 mm bricks were fabricated with mixtures of clay soil and ordinary Portland cement added with up to 30 wt.% of PET waste particles. Granulometric analysis of soil indicated it as sandy and adequate for brick fabrication. As for the PET particles, they can be considered non-plastic and sandy. The Atterberg consistency limits indicated that addition of 20 wt.% PET waste gives the highest plasticity limit of 17.3%; moreover, with PET waste addition there was an increase in the optimum moisture content for the compaction and decrease in specific weight. Standard tests showed an increase in compressive strength from 0.83 MPa for the plain soil-cement to 1.80 MPa for the 20 wt.% PET-added bricks. As for water absorption, all bricks displayed values between 15% and 16% that attended the standards and might be considered an alternative for non-structural applications, such as wall closures in building construction.

Cementitious materials cause a great impact on the environment due to the calcination of clinker and the extraction of non-renewable mineral resources. In this work, the replacement of quartz sand from the river by PET sand was evaluated at levels of 10%, 20%, and 30%. Tests were performed in the fresh state through consistency, air retention, density, and incorporated air and in the hardened state for compressive strength, flexural strength, density, capillarity, and water absorption. The results show that PET sand is viable in contents of up to 10%, improving the mechanical properties of the mortar and without compromising its workability and incorporated air properties. Above that level, the loss of properties is very excessive, mainly of workability and incorporated air. The incorporated air of the 30% composition, for example, reaches 24%, an excessive value that impacts the properties of the hardened state, making it impossible to use the material at levels greater than 20%. It is concluded that the use of recycled PET sand is a possibility that contributes to sustainable development, as it reduces the extraction of quartz sand from the river, a non-renewable mineral resource.

This study aimed to analyze potential industrial solid waste that can be added to soil-cement blocks. A narrative literature review was conducted in the Scopus academic database, using as the search criteria keywords related to the topic, such as soil-cement, building materials, soil-cement blocks, soil-cement bricks, physical and mechanical properties, solid waste, life cycle analysis, and civil construction. A variety of industrial solid waste that can be incorporated into soil-cement blocks was observed, such as waste rock, sludge from water treatment plants, wood sawdust, polyethylene terephthalate fibers (PET), vegetable fibers from loofah, hemp fibers, rice husks, brachiaria grass, poultry eggshells, sugar cane bagasse, wheat and barley straw, welding slag, foundry sand, waste from quartzite mining, construction, and demolition, mechanical turning, pulp industry grains, and steel mill co-products. Among the investigated wastes, those that improved the physical and mechanical properties of the soil-cement blocks were grains from the cellulose industry, rice husks, Brachiaria grass, steel by-products with granulated soil-cement blocks and blast furnace slag. The waste that produced no satisfactory results was sludge from a water treatment plant, sugarcane bagasse, and vegetable loofah. Through this research, it was possible to verify that the behavior of soil-cement blocks is influenced by several factors in their manufacture, mainly regarding the type and percentage of incorporated waste. However, it is important to be concerned with its application in waste blocks so as not to increase the environmental impacts in the long term.

The objective of this work was to evaluate the effect of partial replacement of soil by different percentages of coconut fiber powder in the manufacture of soil–cement bricks. The reference mix ratio of 10:1 (soil:cement) in volume was used for the manufacture of bricks, in addition to the partial replacement of soil mass by 5, 10, and 15% of coconut fiber. The characterization of the raw materials was performed with the analysis of the granulometry, together with technological tests, such as mechanical compressive strength and water absorption. As a result, it was observed that the soil has 34.30% clay and 62.80% sand, characterizing a sandy-clay soil type and the coconut fiber powder was characterized as a fine aggregate. The mechanical compressive strength tests showed a decrease in their average values according to the increase in the incorporation of coconut fiber into the bricks. It was concluded that the results of the mechanical compressive strength and some of the water absorption are in disagreement with the Brazilian technical standard. This conclusion corroborates other studies that show the difficulty in standardizing reference mixtures and working with soil, which is a highly heterogeneous material.