The urbanization process contributes to the growth of solid waste generation and causes an increase in environmental impacts and failures in the management of solid waste. The number of dumps is a concern due to the limited implementation and safe disposal of this waste. The interest in sustainable techniques has been growing in relation to waste management, which is largely absorbed by the civil construction sector. This work aimed to review plastic waste, especially polyethylene terephthalate (PET), that can be incorporated with construction materials, such as concrete, mortars, asphalt mixtures, and paving. The use of life-cycle assessment (LCA) is related, as a tool that allows the sustainability of products and processes to be enhanced in the long term. After analyzing the recent literature, it was identified that studies related to plastic wastes in construction materials concentrate sustainability around the alternative destination of waste. Since the plastic waste from different production chains are obtained, it was possible to affirm the need for a broader assessment, such as the LCA, providing greater quantification of data making the alternative processes and products more sustainable. The study contributes to enhance sustainability in alternative building materials through LCA.

Geopolymer materials have been gaining ground in the civil construction sector not only for having superior physical properties when compared to conventional cement, but also for being less harmful to the environment, since the synthesis of the geopolymer does not release toxic gases or require high energy costs. On the other hand, geopolymer materials like cementitious matrices have low flexural strength and have fragile breakage. To overcome these deficiencies, the insertion of fibers in geopolymeric matrices has been evaluated as a solution. Although most research on this practice focuses on the use of synthetic fibers, the use of natural fibers has been growing and brings as an advantage the possibility of producing an even more ecological material, satisfying the need to create eco-friendly materials that exists today in society. Thus, this paper aimed to, through the evaluation of research available in the literature, understand the behavior of fibers in geopolymer matrices, identify similarities and differences between the performance of geopolymer composites reinforced with natural and synthetic fibers and, understanding that it is possible, point out ways to optimize the performance of these composites.

This review article proposes the identification and basic concepts of materials that might be used for the production of high-performance concrete (HPC) and ultra-high-performance concrete (UHPC). Although other reviews have addressed this topic, the present work differs by presenting relevant aspects on possible materials applied in the production of HPC and UHPC. The main innovation of this review article is to identify the perspectives for new materials that can be considered in the production of novel special concretes. After consulting different bibliographic databases, some information related to ordinary Portland cement (OPC), mineral additions, aggregates, and chemical additives used for the production of HPC and UHPC were highlighted. Relevant information on the application of synthetic and natural fibers is also highlighted in association with a cement matrix of HPC and UHPC, forming composites with properties superior to conventional concrete used in civil construction. The article also presents some relevant characteristics for the application of HPC and UHPC produced with alkali-activated cement, an alternative binder to OPC produced through the reaction between two essential components: precursors and activators. Some information about the main types of precursors, subdivided into materials rich in aluminosilicates and rich in calcium, were also highlighted. Finally, suggestions for future work related to the application of HPC and UHPC are highlighted, guiding future research on this topic.

The use of natural lignocellulosic fibers has become popular all over the world, as they are abundant, low-cost materials that favor a series of technological properties when used in cementitious composites. Due to its climate and geographic characteristics, Brazil has an abundant variety of natural fibers that have great potential for use in civil construction. The objective of this work is to present the main concepts about lignocellulosic fibers in cementitious composites, highlighting the innovation and advances in this topic in relation to countries such as Brazil, which has a worldwide prominence in the production of natural fibers. For this, some common characteristics of lignocellulosic fibers will be observed, such as their source, their proportion of natural polymers (biological structure of the fiber), their density and other mechanical characteristics. This information is compared with the mechanical characteristics of synthetic fibers to analyze the performance of composites reinforced with both types of fibers. Despite being inferior in tensile and flexural strength, composites made from vegetable fibers have an advantage in relation to their low density. The interface between the fiber and the composite matrix is what will define the final characteristics of the composite material. Due to this, different fibers (reinforcement materials) were analyzed in the literature in order to observe their characteristics in cementitious composites. Finally, the different surface treatments through which the fibers undergo will determine the fiber–matrix interface and the final characteristics of the cementitious composite.

The use of plant fibers in cementitious composites has been gaining prominence with the need for more sustainable construction materials. It occurs due to the advantages natural fibers provide to these composites, such as the reduction of density, fragmentation, and propagation of cracks in concrete. The consumption of coconut, a fruit grown in tropical countries, generates shells that are improperly disposed of in the environment. The objective of this paper is to provide a comprehensive review of the use of coconut fibers and coconut fiber textile mesh in cement-based materials. For this purpose, discussions were conducted on plant fibers, the production and characteristics of coconut fibers, cementitious composites reinforced with coconut fibers, cementitious composites reinforced with textile mesh as an innovative material to absorb coconut fibers, and treatments of coconut fiber for improved product performance and durability. Finally, future perspectives on this field of study have also been highlighted. Thus, this paper aims to understand the behavior of cementitious matrices reinforced with plant fibers and demonstrate that coconut fiber has a high capacity to be used in cementitious composites instead of synthetic fibers.

The Alkali-Activated Materials (AAM) are defined as materials obtained through the reaction between precursors and activators, and are separated into two classes depending on the products formed in the reaction, those rich in calcium, as the blast furnace slag, whose Ca/(Si+Al) ratio is higher than 1; and poor in calcium, which is the geopolymers subclass. In this review article, some bibliographical aspects were discussed regarding the discovery of these materials, through research conducted by Victor Glukhovsky and through the characterization of historical monuments by Davidovits, which began in the 50s and 60s and persist to the present day. The main products obtained in the alkaline activation reaction were also addressed, using the definition of polysialates and zeolites, in the case of geopolymers, and the tobermorite structure, in the case of materials rich in calcium. The main steps of the alkali-activated reaction, such as dissolution, condensation, polycondensation, crystallization, and hardening, were discussed. Some techniques for characterizing the AA reaction products were also examined, such as X-ray diffraction (XRD), nuclear magnetic resonance spectrometry (NMR), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Finally, the main factors that interfere in the kinetics of AA reactions were explored, in which the type of cure and the activating solution used in the alkali-activated materials production stands out.