In this paper, we propose an improved clustering algorithm for wireless sensor networks (WSNs) that aims to increase network lifetime and efficiency. We introduce an enhanced fuzzy spider monkey optimization technique and a hidden Markov model-based clustering algorithm for selecting cluster heads. Our approach considers factors such as network cluster head energy, cluster head density, and cluster head position. We also enhance the energy-efficient routing strategy for connecting cluster heads to the base station. Additionally, we introduce a polling control method to improve network performance while maintaining energy efficiency during steady transmission periods. Simulation results demonstrate a 1.2% improvement in network performance using our proposed model.
The life and efficiency of electric vehicle batteries are susceptible to temperature. The impact of cold climate dramatically decreases battery life, while at the same time increasing internal impedance. Thus, a battery thermal management system (BTMS) is vital to heat and maintain temperature range if the electric vehicle’s batteries are operating in a cold climate. This paper presents an induction heater-based battery thermal management system that aims to ensure thermal safety and prolong the life cycle of Lithium-ion batteries (Li-Bs). This study used a standard simulation tool known as GT-Suite to simulate the behavior of the proposed BTMS. For the heat transfer, an indirect liquid heating method with variations in flow rate was considered between Lithium-ion batteries. The battery and cabin heating rate was analyzed using the induction heater powers of 2, 4, and 6 kW at ambient temperatures of −20, −10, and 0 °C. A water and ethylene glycol mixture with a ratio of 50:50 was considered as an operating fluid. The findings reveal that the thermal performance of the proposed system is generally increased by increasing the flow rate and affected by the induction heater capacity. It is evident that at −20 °C with 27 LPM and 6 kW heater capacity, the maximum heat transfer rate is 0.0661 °C/s, whereas the lowest is 0.0295 °C/s with 2 kW heater capacity. Furthermore, the proposed BTMS could be a practical approach and help to design the thermal system for electric vehicles in the future.
The requirement for energy is increasing worldwide as populations and economies develop. Reasons for this increase include global warming, climate change, an increase in electricity demand, and paucity of fossil fuels. Therefore, research in renewable energy technology has become a central topic in recent studies. In this study, a solar-assisted house heating system with a seasonal underground thermal energy storage tank is proposed based on the reference system to calculate the insulation thickness effect, the collector area, and an underground storage tank volume on the system performance according to real weather conditions at Jeju Island, South Korea. For this purpose, a mathematical model was established to calculate its operating performance. This mathematical model used the thermal response factor method to calculate the heat load and heat loss of the seasonal underground thermal energy storage tank. The results revealed that on days with different weather conditions, namely, clear weather, intermittent clouds sky, and overcast sky, the obtained solar fraction was 45.8%, 17.26%, and 0%, respectively. Using this method, we can save energy, space, and cost. This can then be applied to the solar-assisted house heating system in South Korea using the seasonal underground thermal energy storage tank.
1 August 2021 in Case Studies in Thermal Engineering
Accurate forecasting of photovoltaic (PV) power generation is essential for mitigating weather-induced variability and maintaining power-system stability. This study aims to improve PV power forecasting accuracy by enhancing the quality of numerical weather prediction (NWP) inputs rather than modifying forecasting model structures. Specifically, systematic errors in temperature, wind speed, and solar radiation data produced by the Unified Model–Local Data Assimilation and Prediction System (UM-LDAPS) are corrected using a Model Output Statistics (MOS) approach. A case study was conducted for a 20 kW rooftop PV system in Buan, South Korea, comparing forecasting performance before and after MOS application using a random forest-based PV forecasting model. The results show that MOS significantly improves meteorological input accuracy, reducing the root mean square error (RMSE) of temperature, wind speed, and solar radiation by 38.1–62.3%. Consequently, PV power forecasting errors were reduced by 70.0–78.7% across lead times of 1–6 h, 7–12 h, and 19–24 h. After MOS correction, the normalized mean absolute percentage error (nMAPE) remained consistently low at approximately 7–8%, indicating improved forecasting robustness across the evaluated lead-time ranges. In addition, an economic evaluation based on the Korean renewable energy forecast-settlement mechanism estimated an annual benefit of approximately 854 USD for the analyzed 20 kW PV system. A complementary valuation using an NREL-based framework yielded an annual benefit of approximately 296 USD. These results demonstrate that improving meteorological data quality through MOS enhances PV forecasting performance and provide measurable economic value.