Jae-Soub Han

Mr. Jae-Soub Han

Chung-Ang University, Seoul, South Korea
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 April 2020 in Sensors
Verified
Journal Article
Open access
PDF file
KSKiho Seong
Kiho Seong
DJDong-Kyu Jung
Dong-Kyu Jung
DYDong-Hyun Yoon
Dong-Hyun Yoon
Jae-Soub HanJae-Soub Han
Jae-Soub Han
JKJu-Eon Kim
Ju-Eon Kim
KBKwang-Hyun Baek
Kwang-Hyun Baek
Ultra-wideband (UWB) wireless communication is prospering as a powerful partner of the Internet-of-things (IoT). Due to the ongoing development of UWB wireless communications, the demand for high-speed and medium resolution analog-to-digital converters (ADCs) continues to grow. The successive approximation register (SAR) ADCs are the most powerful candidate to meet these demands, attracting both industries and academia. In particular, recent time-interleaved SAR ADCs show that multi-giga sample per second (GS/s) can be achieved by overcoming the challenges of high-speed implementation of existing SAR ADCs. However, there are still critical issues that need to be addressed before the time-interleaved SAR ADCs can be applied in real commercial applications. The most well-known problem is that the time-interleaved SAR ADC architecture requires multiple sub-ADCs, and the mismatches between these sub-ADCs can significantly degrade overall ADC performance. And one of the most difficult mismatches to solve is the sampling timing skew. Recently, research to solve this timing-skew problem has been intensively studied. In this paper, we focus on the cutting-edge timing-skew calibration technique using a window detector. Based on the pros and cons analysis of the existing techniques, we come up with an idea that increases the benefits of the window detector-based timing-skew calibration techniques and minimizes the power and area overheads. Finally, through the continuous development of this idea, we propose a timing-skew calibration technique using a comparator offset-based window detector. To demonstrate the effectiveness of the proposed technique, intensive works were performed, including the design of a 7-bit, 2.5 GS/s 5-channel time-interleaved SAR ADC and various simulations, and the results prove excellent efficacy of signal-to-noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) of 40.79 dB and 48.97 dB at Nyquist frequency, respectively, while the proposed window detector occupies only 6.5% of the total active area, and consumes 11% of the total power.

17 May 2022 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
DYDong-Hyun Yoon
Dong-Hyun Yoon
DJDong-Kyu Jung
Dong-Kyu Jung
KSKiho Seong
Kiho Seong
Jae-Soub HanJae-Soub Han
Jae-Soub Han
KCKeun-Yong Chung
Keun-Yong Chung
KBKwang-Hyun Baek
Kwang-Hyun Baek
This article proposes a 3.2-GHz subsampling phase-locked loop (SSPLL)-based injection-locked clock multiplier (ILCM) using a subsampling delay-locked loop (SSDLL). The proposed ILCM achieves a superior noise reduction effect at low offset frequency because of the high feedback gain of SSPLL. Also, SSDLL is proposed for background phase calibration between SSPLL and injection. Since SSPLL and SSDLL use identical SSCP, the power consumption of the frequency and phase calibration is only 1.32 mW. This work is fabricated in a 65-nm CMOS process, and the 10-kHz phase noise is improved by 8.6 dB. The rms jitter from 10 kHz to 30 MHz is 178 fs. The chip-to-chip variations (20 chips) are 17 and 169 fs with/without SSDLL, respectively. The measured results show that FoM 1 , FoM 2 , and total power consumption are −245.1, −260.1 dB, and 9.85 mW, respectively.

4 July 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
KSKiho Seong
Kiho Seong
Jae-Soub HanJae-Soub Han
Jae-Soub Han
YSYong Shim
Yong Shim
KBKwang-Hyun Baek
Kwang-Hyun Baek
This brief presents the on-chip background offset and timing-skew calibration of the 1-then-2b/cycle time-interleaved successive-approximation-register analog-to-digital converter (TI SAR ADC). For timing-skew between sub-ADC’s sampling clocks, a comparator offset-based window detector (WD) is used to adjust the clock edge misalignment. In addition, comparator offset calibration is considered both in terms of 1) global offset (between the offset-free reference comparator and the local reference comparator in each sub-ADC) and 2) local offset (between the local reference comparator and the rest of the comparators in the same sub-ADC). The proposed calibration sufficiently suppresses noise floor and spurs, and all calibrations are performed in the background without interfering with normal ADC operation. The prototype 5-way TI SAR ADC is fabricated in a 28 nm CMOS process and occupies a 0.03 mm2 area including on-chip calibration. With the proposed calibration, the prototype achieves SNDR of 40 dB at Nyquist input and consumes 7.57 mW, leading to the Walden figure of merit ( ${\text {FoM}_{W}}$ ) of 37.2 fJ/conversion-step.

8 November 2021 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
DJDong-Kyu Jung
Dong-Kyu Jung
KSKiho Seong
Kiho Seong
Jae-Soub HanJae-Soub Han
Jae-Soub Han
YSYong Shim
Yong Shim
KBKwang-Hyun Baek
Kwang-Hyun Baek
This brief presents a low-power asynchronous 10-bit 2-then-1b/cycle successive approximation register (SAR) analog-to-digital converter (ADC). With partial adoption of 2b/cycle mode only for higher-order bit conversions, additional area and power consumption could be minimized while maintaining fast conversion rate. Moreover, unlike the previous 2b/cycle conversion architecture, where two capacitive digital-to-analog converters (C-DACs) and multiple analog comparators are unavoidable, the proposed 2-then-1b/cycle conversion is implemented with only one C-DAC and one analog comparator by utilizing a digital-based time-domain reference. The speed of 1b/cycle conversion for lower-order bits is improved with a dual-mode comparator. With the aforementioned techniques, the prototype 10-bit SAR ADC is fabricated in 65 nm CMOS process. The ADC core occupies an active area of 0.0142 mm 2 and consumes power of 3.8 $\boldsymbol{\mu }\text{W}$ at 0.5 V supply voltage and 3 MS/s conversion rate. The SNDR measured at a Nyquist-rate input frequency is 56.41 dB, resulting in a figure of merit (FoM) is 2.33 fJ/c.-s.

14 October 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Jae-Soub HanJae-Soub Han
Jae-Soub Han
TETae-Hyeok Eom
Tae-Hyeok Eom
SCSeong-Wook Choi
Seong-Wook Choi
KSKiho Seong
Kiho Seong
DYDongHyun Yoon
DongHyun Yoon
YSYong Shim
Yong Shim
Sampling-based PLLs have become a new research trend due to the possibility of removing the frequency divider (FDIV) from the feedback path, where the FDIV increases the contribution of in-band noise by the factor of dividing ratio square (N2). Between two possible sampling methods, sub-sampling and reference-sampling, the latter provides a relatively wide locking range, as the slower input reference signal is sampled with the faster VCO output signal. However, removal of FDIV makes the PLL not feasible to implement fractional-N operation based on varying divider ratios through random sequence generators, such as a Delta-Sigma-Modulator (DSM). To address the above design challenges, we propose a reference-sampling-based calibration-free fractional-N PLL (RSFPLL) with a phase-interpolator-linked sampling clock generator (PSCG). The proposed RSFPLL achieves fractional-N operations through phase-interpolator (PI)-based multi-phase generation instead of a typical frequency divider or digital-to-time converter (DTC). In addition, to alleviate the power burden arising from VCO-rated sampling, a flexible mask window generation method has been used that only passes a few sampling clocks near the point of interest. The prototype PLL system is designed with a 65 nm CMOS process with a chip size of 0.42 mm2. It achieves 322 fs rms jitter, −240.7 dB figure-of-merit (FoM), and −44.06 dBc fractional spurs with 8.17 mW power consumption.

11 February 2026 in IEEE Access
Verified
Journal Article
Open access
JLJoohee Lee
Joohee Lee
Jae-Soub HanJae-Soub Han
Jae-Soub Han
JSJonghyun Seo
Jonghyun Seo
DYDong-Hyun Yoon
Dong-Hyun Yoon
KBKwang-Hyun Baek
Kwang-Hyun Baek
A type-I reference-sampling injection-locked phase-locked loop (RS-ILPLL) for low-jitter clock generation is presented. For the first time, the proposed architecture integrates a reference-sampling PLL (RSPLL) with an injection-locked PLL (IL-PLL), combining the wide lock range and inherent stability of the RSPLL with the noise-suppression capability of injection locking. An RSPD-based injection timing calibration loop is also introduced to precisely align the phase between the PLL and injection paths by compensating intrinsic delay mismatches. Fabricated in a 65-nm CMOS process, the prototype occupies a core area of 0.24 mm² and consumes 5.78 mW at 2.4-GHz. The RS-ILPLL achieves a 9.1 dB phase-noise improvement and an integrated RMS jitter of 92.6 fs (FoM1 = –253 dB, FoM2 = –266.8 dB), corresponding to a 72 % reduction compared with a conventional type-I RSPLL. Owing to its stable loop dynamics and compact implementation, the proposed RS-ILPLL demonstrates fast locking, low power, and robust low noise performance without requiring an auxiliary FLL. These features make it highly suitable for next-generation high-speed clocking applications.