Distance computation between two input vectors is a widely used computing unit in several pattern recognition, signal processing and neuromorphic applications. However, the implementation of such a functionality in conventional CMOS design requires expensive hardware and involves significant power consumption. Even power-efficient current-mode analog designs have proved to be slower and vulnerable to variations. In this paper, we propose an approximate mixed-signal design for the distance computing core by noting the fact that a vast majority of the signal processing applications involving this operation are resilient to small approximations in the distance computation. The proposed mixed-signal design is able to interface with external digital CMOS logic and simultaneously exhibit fast operating speeds. Another important feature of the proposed design is that the computing core is able to compute two variants of the distance metric, namely the (i) Euclidean distance squared ( norm) and (ii) Manhattan distance ( norm). The performance of the proposed design was evaluated on a standard K-means clustering algorithm on the “Iris flower dataset”. The results indicate a throughput of 6 ns per classification and ∼2.3× lower energy consumption in comparison to a synthesized digital CMOS design in commercial 45 nm CMOS technology.
Sampling-based PLLs have become a new research trend due to the possibility of removing the frequency divider (FDIV) from the feedback path, where the FDIV increases the contribution of in-band noise by the factor of dividing ratio square (N2). Between two possible sampling methods, sub-sampling and reference-sampling, the latter provides a relatively wide locking range, as the slower input reference signal is sampled with the faster VCO output signal. However, removal of FDIV makes the PLL not feasible to implement fractional-N operation based on varying divider ratios through random sequence generators, such as a Delta-Sigma-Modulator (DSM). To address the above design challenges, we propose a reference-sampling-based calibration-free fractional-N PLL (RSFPLL) with a phase-interpolator-linked sampling clock generator (PSCG). The proposed RSFPLL achieves fractional-N operations through phase-interpolator (PI)-based multi-phase generation instead of a typical frequency divider or digital-to-time converter (DTC). In addition, to alleviate the power burden arising from VCO-rated sampling, a flexible mask window generation method has been used that only passes a few sampling clocks near the point of interest. The prototype PLL system is designed with a 65 nm CMOS process with a chip size of 0.42 mm2. It achieves 322 fs rms jitter, −240.7 dB figure-of-merit (FoM), and −44.06 dBc fractional spurs with 8.17 mW power consumption.
A hybrid control method using a comparator and a charge control method is proposed for a single-inductor multiple-output (SIMO) DC-DC converter. SIMO DC-DC converters have the weaknesses relating to cross-regulation, as all the output channels share the energy stored in a single inductor. Although multiple control methods such as Time-Multiplexing Control (TMC) and Ordered Power Distributing Control (OPDC) have been proposed to prevent cross-regulation or to improve load capability, effective use of limited resources appears to have not yet been achieved. This paper introduces a hybrid control topology that (1) utilizes comparator-based regulations for most outputs and (2) uses a new charge control loop method for the last output to reduce cross-regulation with low hardware complexity. In addition, the proposed scheme efficiently reuses the system’s redundant energy by adaptively controlling the freewheeling switch that opens the path to the input battery to store the surplus energy resources again. The proposed SIMO DC-DC converter was designed and validated with a 0.18 μm 3.3 V CMOS process. The converter has four regulated outputs of 0.9, 1.2, 1.5, and 2.2 V, and as a result of the simulation, it was found that the cross-regulation was estimated to be 0.4 mV/mA when the output current changes by ~200 mA. In addition, estimated peak power conversion efficiency of 88.5% was achieved at a total output power of 405 mW.
Recent healthcare systems based on human body communication (HBC) require human interaction sensors. Due to the conductive properties of the human body, capacitive sensors are most widely known and are applied to many electronic gadgets for communication. Capacitance fluctuations due to the fact of human interaction are typically converted to voltage levels using some analog circuits, and then analog-to-digital converters (ADCs) are used to convert analog voltages into digital codes for further processing. However, signals detected by human touch naturally contain large noise, and an active analog filter that consumes a lot of power is required. In addition, the inclusion of ADCs causes the system to use a large area and amount of power. The proposed structure adopts a digital-based moving average filter (MAF) that can effectively operate as a low-pass filter (LPF) instead of a large-area and high-power consumption analog filter. In addition, the proposed ∆C detection algorithm can distinguish between human interaction and object interaction. As a result, two individual digital signals of touch/release and movement can be generated, and the type and strength of the touch can be effectively expressed without the help of an ADC. The prototype chip of the proposed capacitive sensing circuit was fabricated with commercial 65 nm CMOS process technology, and its functionality was fully verified through testing and measurement. The prototype core occupies an active area of 0.0067 mm2, consumes 7.5 uW of power, and has a conversion time of 105 ms.