This study investigates the feasibility of creating a clay polymer-based composite using cowpea husk (CPH) as filler for production of roof tiles. Polymeric composites were fabricated by mixing unsaturated polyester (UPT) resin with cowpea husk at different filler weights and curing. A hybrid composite was produced with the addition of 3 wt.% clay and all samples produced were subjected to flexural, hardness and dynamic mechanical analysis (DMA) tests. The effect of clay addition on the mechanical and thermo-mechanical behaviour of formulated composites was investigated. The morphological analysis of the mono and hybrid system shows a rough and coarse inhomogeneous surface with voids created due to the addition of CPH filler for the mono reinforced and clay uniformly filling the voids that were created by the CPH in the hybrid composite. It is observed that hardness, tensile modulus and flexural modulus of hybrid composites increase with an increase in the CPH contents, while the strength and flexural strength all decrease with filler content. The optimal composition was obtained using Grey relational analysis (GRA) at 18% CPH for both mono and hybrid composite. The results imply that the composite combination can be used in making rooftiles and/or also in applications where low strength is required.
The escalating energy consumption rates and the alarming environmental impacts associated with fossil fuel usage have driven global attention towards alternative energy sources. While nuclear power has emerged as one such alternative, concerns about past reactor accidents and the health effects of radiation release have limited its widespread adoption. Renewable energy, on the other hand, offers a promising solution with minimal environmental harm compared to nuclear power. However, the intermittent nature of renewable energy sources and their inability to consistently supply power present significant challenges for nations aiming to harness these abundant resources. To address these challenges, the integration of simulation technology into energy generation processes has proven instrumental. By employing simulation tools, it becomes possible to identify, control, and even eliminate factors that may hinder energy generation and efficiency. Furthermore, simulation technology enables accurate predictions of the expected energy output from renewable sources. This paper presents a comprehensive review of the recent advancements and applications of simulation technology in renewable energy generation. It elucidates how simulation technology has been successfully integrated into renewable energy systems and discusses its potential to enhance the efficiency of renewable energy generation.
The adverse effects of the combustion of fossil fuels on humanity and the environment have made it vital to discover eco-friendly, sustainable, and renewable energy alternatives. Globally, there exists loose biomass, which is agricultural and cultural waste that can be utilised to produce briquettes, a type of solid fuel. Briquettes have played a significant role in the energy generation economies of both developing and developed nations. The production of briquettes involves a series of activities, including collection, transportation, storage, processing, and densification of the feedstock to meet predetermined quality parameters. Rice husk, corn stalk, wheat straw, cassava stalk, groundnut shell, olive husk, palm kernel shell and coconut shell are among the feedstocks for briquettes. In order to increase the cohesive strength of the briquettes, binders are incorporated during the densification process. This study aims to investigate the current state of research regarding the utilisation of biomass-derived briquettes as a viable substitute for traditional fuels. To achieve this objective, a comprehensive analysis of recent literature published between 2017 and 2023 is conducted. This study encompasses essential subtopics, including the accessibility of biomass, the selection of binders, the parameters of the briquette process, and the equipment used for briquetting.
The expansion of the global population has increased the demand for renewable and environmentally friendly energy. This resulted in the search for alternative energy sources, especially those that utilise industrial refuse, such as biomass. Biomass can be converted into biofuels and bioenergy that meet the requirements of society while also having a lower environmental impact, and the materials are frequently inexpensive and easily accessible. Utilising biomass as a source of energy has the added benefit of generating employment opportunities in underdeveloped and undeveloped regions worldwide. This review examines the current energy situation and methods for transforming biomass into energy, underscoring the significance of understanding the properties of biomass materials in order to reduce dependence on fossil fuels.