Godwin Mong Kalu-Uka

Dr. Godwin Mong Kalu-Uka

Alex-Ekwueme Federal University, Ndufu-Alike, Ebonyi State, Nigeria
+1
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 November 2020 in Materials
Verified
Journal Article
Open access
PDF file
MKMoses Kigozi
Moses Kigozi
RKRavi Kali
Ravi Kali
ABAbdulhakeem Bello
Abdulhakeem Bello
BPBalaji Padya
Balaji Padya
Godwin Mong Kalu-UkaGodwin Mong Kalu-Uka
Godwin Mong Kalu-Uka
NDNelson Dzade
Nelson Dzade
In this work, African maize cobs (AMC) were used as a rich biomass precursor to synthesize carbon material through a chemical activation process for application in electrochemical energy storage devices. The carbonization and activation were carried out with concentrated Sulphuric acid at three different temperatures of 600, 700 and 800 °C, respectively. The activated carbon exhibited excellent microporous and mesoporous structure with a specific surface area that ranges between 30 and 254 m2·g−1 as measured by BET analysis. The morphology and structure of the produced materials are analyzed through Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Boehm titration, X-ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. X-ray photoelectron spectroscopy indicates that a considerable amount of oxygen is present in the materials. The functional groups in the activated carbon enhanced the electrochemical performance and improved the material’s double-layer capacitance. The carbonized composite activated at 700 °C exhibited excellent capacitance of 456 F g−1 at a specific current of 0.25 A g−1 in 6 M KOH electrolyte and showed excellent stability after 10,000 cycles. Besides being a low cost, the produced materials offer good stability and electrochemical properties, making them suitable for supercapacitor applications.

13 January 2022 in Waste and Biomass Valorization
Verified
Journal Article
Closed access
PDF file
Godwin Mong Kalu-UkaGodwin Mong Kalu-Uka
Godwin Mong Kalu-Uka
SKShubham Kumar
Shubham Kumar
AKAbraham Chinedu Kalu-Uka
Abraham Chinedu Kalu-Uka
SVShruti Vikram
Shruti Vikram
GIGina Odochi Ihekweme
Gina Odochi Ihekweme
SKSandeep Kumar
Sandeep Kumar

1 March 2021 in Biomass and Bioenergy
Verified
Journal Article
Closed access
Godwin Mong Kalu-UkaGodwin Mong Kalu-Uka
Godwin Mong Kalu-Uka
SKSandeep Kumar
Sandeep Kumar
AKAbraham Chinedu Kalu-Uka
Abraham Chinedu Kalu-Uka
SVShruti Vikram
Shruti Vikram
OOOkore Okay Okorafor
Okore Okay Okorafor
AOAzikiwe Peter Onwualu
Azikiwe Peter Onwualu

12 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EAESTHER NNEKA ANOSIKE-FRANCIS
ESTHER NNEKA ANOSIKE-FRANCIS
Paschal Ateb UbiPaschal Ateb Ubi
Paschal Ateb Ubi
Ifeyinwa Ijeoma ObianyoIfeyinwa Ijeoma Obianyo
Ifeyinwa Ijeoma Obianyo
Godwin Mong Kalu-UkaGodwin Mong Kalu-Uka
Godwin Mong Kalu-Uka
ABAbdulhakeem Bello
Abdulhakeem Bello
POPeter Onwualu
Peter Onwualu
This study investigates the feasibility of creating a clay polymer-based composite using cowpea husk (CPH) as filler for production of roof tiles. Polymeric composites were fabricated by mixing unsaturated polyester (UPT) resin with cowpea husk at different filler weights and curing. A hybrid composite was produced with the addition of 3 wt.% clay and all samples produced were subjected to flexural, hardness and dynamic mechanical analysis (DMA) tests. The effect of clay addition on the mechanical and thermo-mechanical behaviour of formulated composites was investigated. The morphological analysis of the mono and hybrid system shows a rough and coarse inhomogeneous surface with voids created due to the addition of CPH filler for the mono reinforced and clay uniformly filling the voids that were created by the CPH in the hybrid composite. It is observed that hardness, tensile modulus and flexural modulus of hybrid composites increase with an increase in the CPH contents, while the strength and flexural strength all decrease with filler content. The optimal composition was obtained using Grey relational analysis (GRA) at 18% CPH for both mono and hybrid composite. The results imply that the composite combination can be used in making rooftiles and/or also in applications where low strength is required.

1 April 2021 in Science Progress
Verified
Journal Article
Open access
PDF file
GIGINA IHEKWEME
GINA IHEKWEME
Ifeyinwa Ijeoma ObianyoIfeyinwa Ijeoma Obianyo
Ifeyinwa Ijeoma Obianyo
KOKingsley Ikechukwu Orisekeh
Kingsley Ikechukwu Orisekeh
Godwin Mong Kalu-UkaGodwin Mong Kalu-Uka
Godwin Mong Kalu-Uka
INIheoma C Nwuzor
Iheoma C Nwuzor
AOAzikiwe Peter Onwualu
Azikiwe Peter Onwualu
Plasticity is an essential property of clay that determines its suitability for water filtration. There are no published works on the plastic behavior of clays from the study locations. The plastic behavior of seven Nigerian clays was examined using plasticity indices and compressive stress parameters in relation to chemical compositions and moisture content. The objective is to determine plastic behavior of some Nigerian clays and their suitability in production of Expanded Clay Aggregates (ECA) for water filters. Compressive stresses and deformation parameters were determined experimentally and compared theoretically. Atterberg limits (D 4318) were used to determine the plasticity indices. Chemical compositions of the samples were examined with XRF and correlated with plasticity and mineral contents of the clays. The clays are aluminosilicates with SiO2/Al2O3 ratio of 1.61 to 3.03 and plastic indices of 8 to 49. Low plastic indices (8–11) and low compressive stresses parameters were observed for kaolinite clays (0.002 MPa) due to their low affinity for water while zeolite rich clays showed high plastic indices (46 and 49) for Obowo and Minna and sharp difference in their compressive stresses parameters (0.15 and 0.03 MPa) at optimum moisture contents of 57% and 53%, respectively. Despite varying moisture content, chemical and mineral compositions, all curves showed similar trends apart from kaolinites at 40% moisture content. Relationships exist among microstructural properties, chemical composition, moisture content, compressive strength, and plasticity indices of the clays. The plastic behaviors show they are suitable for development of ECA for water filters.

1 January 2022 in International Journal of Renewable Energy Research
Verified
Journal Article
Open access
PDF file
KAKafayat Adeyemi
Kafayat Adeyemi
VEVictor Eniola
Victor Eniola
MZMusa Tanko Zarmai
Musa Tanko Zarmai
MUMuhammad Uthman
Muhammad Uthman
Godwin Mong Kalu-UkaGodwin Mong Kalu-Uka
Godwin Mong Kalu-Uka
EBEli Jidere Bala
Eli Jidere Bala
Solar power grid integration has increased tremendously in the global electricity market. However, further increase in solar power grid integration has been restricted by the intermittent nature of solar energy supply. For this reason, researchers have developed different mathematical models which could predict the available solar energy radiation and the actual solar photovoltaic energy generated at a given location. Hence, the present study proposes a novel (enhanced multilayer perceptron neural network, MLPNN) model for predicting the daily solar energy generated by a 1.2 MW PV power plant. The stability of the MLPNN model was compared with results obtained from the multiple nonlinear regression (MNR) model and the generalized regression neural network (GRNN) model. The results showed that the enhanced MLPNN model outpaced the MNR and the GRNN models by presenting the lowest normalized root mean square error (nRMSE), the lowest minimum absolute percentage error (MAPE), and the best coefficient of determination (RSQ) for both the rainy [6.09, 5.93, 93.53]% and the dry [6.12, 4.16, 90.77]% seasons, respectively.