Paschal Ateb Ubi

Mr. Paschal Ateb Ubi

University of Calabar, Calabar, Cross River, Nigeria
+1
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EAESTHER NNEKA ANOSIKE-FRANCIS
ESTHER NNEKA ANOSIKE-FRANCIS
Paschal Ateb UbiPaschal Ateb Ubi
Paschal Ateb Ubi
Ifeyinwa Ijeoma ObianyoIfeyinwa Ijeoma Obianyo
Ifeyinwa Ijeoma Obianyo
Godwin Mong Kalu-UkaGodwin Mong Kalu-Uka
Godwin Mong Kalu-Uka
ABAbdulhakeem Bello
Abdulhakeem Bello
POPeter Onwualu
Peter Onwualu
This study investigates the feasibility of creating a clay polymer-based composite using cowpea husk (CPH) as filler for production of roof tiles. Polymeric composites were fabricated by mixing unsaturated polyester (UPT) resin with cowpea husk at different filler weights and curing. A hybrid composite was produced with the addition of 3 wt.% clay and all samples produced were subjected to flexural, hardness and dynamic mechanical analysis (DMA) tests. The effect of clay addition on the mechanical and thermo-mechanical behaviour of formulated composites was investigated. The morphological analysis of the mono and hybrid system shows a rough and coarse inhomogeneous surface with voids created due to the addition of CPH filler for the mono reinforced and clay uniformly filling the voids that were created by the CPH in the hybrid composite. It is observed that hardness, tensile modulus and flexural modulus of hybrid composites increase with an increase in the CPH contents, while the strength and flexural strength all decrease with filler content. The optimal composition was obtained using Grey relational analysis (GRA) at 18% CPH for both mono and hybrid composite. The results imply that the composite combination can be used in making rooftiles and/or also in applications where low strength is required.

8 November 2022 in Nigerian Journal of Technology
Verified
Journal Article
Open access
PDF file
Paschal Ateb UbiPaschal Ateb Ubi
Paschal Ateb Ubi
PAPatrick Adah
Patrick Adah
NAN. A. Ademoh
N. A. Ademoh
ASAbdulrahman Salawu
Abdulrahman Salawu
AHAbdulkadir Hassan
Abdulkadir Hassan
SOSalami Oyeyemi
Salami Oyeyemi
Rice husks are a major agricultural residue with growing volume in Nigeria in recent times owing to the country’s drive for self-sufficiency in rice production. Rice husks have great potential for use as fillers in biocomposites for applications in the manufacture of engineering products. However, the hydrophilic nature of this agricultural residue limits its choice as fillers in biocomposites. This study focused on the modification of the hydrophilic property of rice husks through treatment with benzene diazonium salts in different media (pH levels of 7, 9, 10.5 and 12) to attain the most suitable treatment media for processing rice husks. The treated samples were burned in a furnace at a temperature of 600oC for 6 hours. The compounding of the rice husk ash, CV-60 natural rubber and additives were done on a two-roll mill at a speed ratio of 1:1.25 with rollers temperature of 70oC and cured in a hydraulic press at 130oC for 20 minutes at 2.5 MPa. The composites were developed using rice husk ash as the filler with loadings of 30, 34, 38, 42, 46 and 50 phr. Characterizations and tests carried out include Fourier transform infrared spectroscopy (FTIRS), X-ray fluorescence (XRF), shore A hardness, compressive strength and tensile strength. The composites developed using pH 10.5 treated rice husks yielded the highest silica content and showed better adhesion characteristics. The sample with 42 phr loading gave better mechanical properties with tensile strength, compressive strength, and tensile modulus of 18.5 MPa, 39.72 MPa and 7.87 MPa respectively with a corresponding shore A hardness of 45.32. The rice husk ash filled natural rubber composites can find application in the development of vibration isolation mounts.

6 February 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Paschal Ateb UbiPaschal Ateb Ubi
Paschal Ateb Ubi
NANuhu A. Ademoh
Nuhu A. Ademoh
EAEsther N. Anosike-Francis
Esther N. Anosike-Francis
ASAbdulrahman A. Salawu
Abdulrahman A. Salawu
Adekunle A. AdelekeAdekunle A. Adeleke
Adekunle A. Adeleke
FNFrederick Ngolemasango
Frederick Ngolemasango
The functional properties of engine mounts largely depend on the rubber compound formulation. This study proposes the use of rice husk–derived silica (RHS) blended with carbon black (N772) as an effective and environmentally friendly substitute for fillers used in rubber engine mounts (REMs). CV-60 natural rubber was filled with the blended fillers at various ratios, and their compatibility for use as rubber engine mounts (REMs) was assessed. Grey Relational Analysis was utilised to determine the optimal blend loading levels for use in rubber engine mounts, resulting in 40 phr of N772 and 20 phr of RHS cured at 130 °C and 2.5 MPa for 20 min. The developed REMs and conventional REMs had low vibration data variation during the performance assessment. Their resonance transmissibility was 5.03 and 3.74, corresponding to natural frequencies of 24.27 Hz and 26.94 Hz, respectively. The RHS/N772 REMs had excellent damping characteristics and lower transmissibility in the isolation zone of the vibration isolation curve, which is outside of the resonant frequency region. The efficiency curves showed that the blended fillers are a better and more effective material for REMs at all frequencies, balancing static deflection and vibration isolation.

29 February 2024 in Pure and Applied Chemistry
Verified
Journal Article
Closed access
OOOJONG Elias OJONG
OJONG Elias OJONG
OWOmeke Chimene Wosu
Omeke Chimene Wosu
AEAguma Emenike
Aguma Emenike
Paschal Ateb UbiPaschal Ateb Ubi
Paschal Ateb Ubi
The research considers the design and simulation of 30 000 tons per year of cumene plant using Aspen HYSYS as the simulation tool. The feed (material content) used is the characterized natural gas from Utorogu Gas Field with composition of 0.9019 methane, 0.0694 ethane, 0.0209 propane, 0.00361 n-butane, 0.00414 i-butane, 0.00005 n-pentane and 0.00007 i-pentane. The cumene plant consist of the cryogenic distillation column, de-hydrogenator (Continuous Stirred Tank Reactor), Alkylator (Plug Flow Reactor), storage tanks, separators, pumps, heat exchanger and mixers. The size/design models of basic plant units such as de-hydrogenator, alkylator, separators, storage tanks and distillation column were developed using the principles of mass and energy balance. The result of design or size specifications in terms of equipment diameter of basic plant units obtained from HYSYS simulation are 0.8 m and 0.319 m for the cryogenic and cumene columns; 1.931 m, 2.244 m and 1.366 m for the propane, propene and cumene storage tanks; 1.868 m and 2.076 m for the de-hydrogenator and alkylator; 1.931 m and 2.146 m for propene and cumene separators respectively. The power or capacity of propane and propene pumps configured in the plant are 0.02 kW and 0.005 kW respectively. The result of the reactor and distillation column thickness specification to withstand corrosion, pressure or stress during plant operation in terms of cylindrical shell and ellipsoidal doomed head are 17.36 mm and 4.31 mm respectively. The economic evaluation (overall cost) including the cost of utilities, catalyst, operating, and maintenance for entire plant is $ 3.004 M.

1 January 2022 in e-Prime - Advances in Electrical Engineering, Electronics and Energy
Verified
Journal Article
Open access
FAFidelis Abam
Fidelis Abam
BOBassey B. Okon
Bassey B. Okon
EEEkwe B Ekwe
Ekwe B Ekwe
JIJohn Isaac
John Isaac
SESamuel Oliver Effiom
Samuel Oliver Effiom
OOOlayinka S Ohunakin
Olayinka S Ohunakin