The work presented in this paper is part of a research project aiming for the development of a performance-based approach for sustainable design, focusing on the efficient use of natural resources over the lifetime of buildings. The proposed approach requires the set of benchmarks to provide a consistent and transparent yardstick for the environmental performance of buildings and to strive towards an effective reduction in the use of resources and relative environmental impacts in the building sector. This paper focuses on the development of the framework for the quantification of the benchmarks. Additionally, a review of available benchmarks is provided, showing a huge diversity of values. One of the main factors contributing to such diversity is the lack of a reliable model for the quantification of the benchmarks. To overcome this problem, a consistent model for life-cycle assessment (LCA) is adopted, which is based on a standardized framework and enables comparability of results. Based on the proposed approach, a preliminary set of benchmarks for residential buildings is defined, leading to values in the range of 5–12 kg CO2/m2.yr and 68–186 MJ/m2.yr, for life-cycle global warming and total primary energy, respectively.
Novel fibrous cellulosic substrates impregnated with meta-polybenzimidazole (PBI)-stabilized carbon nanotubes/zinc oxide with different weight content of ZnO and with the use of dimethylacetamide as dispersant media. The pristine ZnO nanoparticle powder was prepared by plant extract-mediated synthesis using Vaccinium vitis-idaea L. The green synthesized ZnO possesses an average crystallite size of 15 nm. The formation of agglomerates from ZnO NPs with size 250 nm–350 nm in the m-PBI@CNTs/ZnO was determined. The prepared materials were investigated by PXRD analysis, XPS, SEM, EDS, AFM, and TEM in order to establish the phase and surface composition, structure, and morphology of the hybrids. The potential of the synthesized hybrid composites to degrade methylene blue (MB) dye as a model contaminant in aqueous solutions under UV illumination was studied. The photocatalytic results show that in the course of the photocatalytic reaction, the m-PBI@CNTs/ZnO 1:3 photocatalyst leads to the highest degree of degradation of the methylene blue dye (67%) in comparison with the other two studied m-PBI@CNTs/ZnO 1:1 and 1:2 composites (48% and 41%). The antibacterial activity of ZnO nanoparticles and the hybrid CNT materials was evaluated by the RMDA and the dynamic contact method, respectively. The profound antibacterial effect of the m-PBI@CNTs/ZnO hybrids was monitored for 120 h of exposition in dark and UV illumination regimes. The photocatalytic property of ZnO nanoparticles significantly shortens the time for bactericidal action of the composites in both regimes. The m-PBI@CNTs/ZnO 1:2 combination achieved complete elimination of 5.105 CFU/mL E. coli cells after 10 min of UV irradiation.
Novel AB-Polybenzimidazole (AB-PBI)/TiO2 nanocomposite membranes have been prepared using a synthetic green chemistry approach. Modified Eaton’s reagent (methansulfonic acid/P2O5) was used as both reaction media for microwave-assisted synthesis of AB-PBI and as an efficient dispersant of partially agglomerated titanium dioxide powders. Composite membranes of 80 µm thickness have been prepared by a film casting approach involving subsequent anti-solvent inversion in order to obtain porous composite membranes possessing high sorption capacity. The maximal TiO2 filler content achieved was 20 wt.% TiO2 nanoparticles (NPs). Titania particles were green synthesized (using a different content of Mentha Spicata (MS) aqueous extract) by hydrothermal activation (150 °C), followed by thermal treatment at 400 °C. The various methods such as powder X-ray diffraction and Thermogravimetric analyses, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Energy-dispersive X-ray spectroscopy, Electronic paramagnetic resonance, Scanning Electron Microscopy and Transmission Electron Microscopy have been used to study the phase and surface composition, structure, morphology, and thermal behavior of the synthesized nanocomposite membranes. The photocatalytic ability of the so-prepared AB-Polybenzimidazole/bio-TiO2 membranes was studied for decolorization of Reactive Black 5 (RB5) as a model azo dye pollutant under UV light illumination. The polymer membrane in basic form, containing TiO2 particles, was obtained with a 40 mL quantity of the MS extract, exhibiting the highest decolorization rate (96%) after 180 min of UV irradiation. The so-prepared AB-Polybenzimidazole/TiO2 samples have a powerful antibacterial effect on E. coli when irradiated by UV light.
The nickel ferrite-activated carbon samples NiFe2O4/Activated carbon and NixFe3−xO4/Fe2O3/AC, x = 0.25; 0.5 obtained by co-precipitation followed by thermal treatment in inert atmosphere, were studied for discoloration of Bromocresol Purple (BCP), B...