The article presents the results of research on the efficiency of photovoltaic (PV) modules cooled with water. The aim of the experiment was to improve the working conditions of solar modules. A temperature decrease was obtained for the PV module by pouring cool tap water onto the upper surface of the modules, either in imitation of rain or as a water film. The power of the cooled and non-cooled devices were then compared. The temperature of the cooled modules dropped to almost 25 °C, whilst the temperature of the non-cooled module was 45 °C. The best results were achieved by cooling modules with a water film, since there were no water splashes, and the continuous cooling of the surface leads to a 20% increase in power. During the test, the non-cooled module attained a maximum power of 105.3 W/m2, compared to 125.5 W/m2 for its cooled counterpart. Cooling the module, therefore, resulted in a power increase of 20.2 W/m2. The results of the work may be of particular interest for small installations, especially because it cleans the modules while providing an increase in power.
28 October 2022 in Geology, Geophysics and Environment
In this study, optical microscopic analyses were applied to evaluate the thermal maturity, characteristics of solid bitumen, and other organic matter finely dispersed in Oligocene shales of the Menilite Formation in the Iwonicz-Zdrój–Rudawka Rymanowska Fold (IRF) and Bóbrka–Rogi Fold (BRF) of the Central Carpathian Synclinorium of the Silesian Nappe, Outer Carpathians, Poland. The investigation was carried out at two-unit depths of the shallow and deeper D-1 sections (430 m – IRF and 4,300 m – BRF) and outcrop samples (BRF). The mean random huminite reflectance values indicate immature conditions with respect to hydrocarbon generation in samples from the D-1 shallow section (VRo≈0.40%) and in the outcrop samples (VRo=0.36%). The degree of thermal maturity of the organic matter from a depth of about 4,300 m – BRF based on random vitrinite (VRo≈0.80%) and solid bitumen (BRo≈0.65%) reflectance measurements is associated with the “oil window” for petroleum generation. The organic components dispersed in the examined Menilite Formation samples are typical for hydrocarbon-prone organic matter, suggesting the dominant kerogen type II. The potential precursor maceral for solid bitumen occurring in the examined samples from the deeper D-1 sections is largely the alginite maceral.
In this paper, we present a detailed analysis of the possibility of using unsupervised machine learning techniques for reservoir interpretation based on the parameters obtained from geophysical measurements that are related to the elastic properties of rocks. Four different clustering algorithms were compared, including balanced iterative reducing and clustering using hierarchies, the Gaussian mixture model, k-means, and spectral clustering. Measurements with different vertical resolutions were used. The first set of input parameters was obtained from the walkaway VSP survey. The second one was acquired in the well using a full-wave sonic tool. Apart from the study of algorithms used for clustering, two data pre-processing paths were analyzed in the context of matching the vertical resolution of both methods. The validation of the final results was carried out using a lithological identification of the medium based on an analysis of the drill core. The measurements were performed in Silurian rocks (claystone, mudstone, marly claystone) lying under an overburdened Zechstein formation (salt and anhydrite). This formation is known for high attenuating seismic signal properties. The presented study shows results from the first and only multilevel walkaway VSP acquisition in Poland.
Important factors controlling the effective utilization of geothermal energy are favorable reservoir properties of rock formations, which determine both the availability and the transfer opportunities of reservoir fluids. Hence, crucial to the successful utilization of a given reservoir is the preliminary recognition of distribution of reservoir parameters as it enables the researchers to select the prospective areas for localization of future geothermal installations and to decide on their characters. The objectives of this paper are analyses and discussion of the properties of quartz sandstones buried down to a depth interval from about 3000 to under 5000 m below surface. These sandstones belong to Ediacaran–Lowery Cambrian Łeba, Kluki and Żarnowiec formations. The source data from the Słupsk IG-1 provided the basis for 1D reconstruction of burial depth and paleothermal conditions as well as enabled the authors to validate of the results of 2D models. Then, porosity distribution within the reservoir formation was determined using the modelings of both the mechanical and chemical compactions along the 70 km-long B’-B part of the A’-A cross-section Bornholm-Słupsk IG-1 well. The results confirmed the low porosities and permeabilities as well as high temperatures of the analyzed rock formations in the Słupsk IG-1 well area. Towards the coast of the Baltic Sea, the porosity increases to more than 5%, while the temperature decreases, but is still relatively high, at about 130 °C. This suggests the application of an enhanced geothermal system or hot dry rocks system as principal methods for using geothermal energy.
For many years, geothermal energy has been successfully used for both energy as well as balneological, healing, and recreational purposes. It should be emphasized that, along with the great interest in geothermal investments, the development of other economic sectors (i.e., tourism, cosmetology, food production, and many other sectors related directly or indirectly to geothermal waters) are also noted in this paper. That kind of development is seen both in regions where centers using geothermal energy are created, as well as in their immediate vicinity. An important aspect of the use of geothermal energy is also its positive impact on the environment by reducing the emission of pollutants that could end up in the environment as a result of using conventional energy sources, namely coal or natural gas. Given the high level of air pollution in Poland, according to data from the European Environment Agency, 12 Polish cities are among the 20 most polluted cities in Europe (data for 2021–2022), and this aspect seems to be key for achieving sustainability while maintaining economic balance. In this article, a new approach to the development of geothermal water utilization in the context of identifying and meeting the social needs of local communities in the Mogilno–Łódź Trough region is described.