Slaughterhouses produce a large amount of wastewater, therefore, with respect to the increasing water scarcity, slaughterhouse wastewater (SWW) recycling seems to be a desirable goal. The emerging challenges and opportunities for recycling and reuse have been examined here. The selection of a suitable process for SWW recycling is dependent on the characteristics of the wastewater, the available technology, and the legal requirements. SWW recycling is not operated at a large scale up to date, due to local legal sanitary requirements as well as challenges in technical implementation. Since SWW recycling with single-stage technologies is unlikely, combined processes are examined and evaluated within the scope of this publication. The process combination of dissolved air flotation (DAF) followed by membrane bioreactor (MBR) and, finally, reverse osmosis (RO) as a polishing step seems to be particularly promising. In this way, wastewater treatment for process water reuse could be achieved in theory, as well as in comparable laboratory experiments. Furthermore, it was calculated via the methane production potential that the entire energy demand of wastewater treatment could be covered if the organic fraction of the wastewater was used for biogas production.
Anaerobic digestion for biomethane production is an important tool regarding sustainable energy production. The objective of this study was to investigate the effects of the substrate composition and operating parameters on biomethane production during anaerobic digestion, focusing on the use of flotates and slaughterhouse waste as substrates with a high organic content. A novelty here was the use of a moving bed biofilm reactor (MBBR) with circulation pump for the anaerobic treatment of flotates, slaughter waste (SW), and their mixture. Flotates and waste from slaughterhouses offer a substrate with a high organic content. In this work, it was shown that both substrates provide a high biochemical methane potential (BMP). The highest methane yield was achieved by mixing both substrates. In continuous operation, special challenges arose, due to the high nitrogen and fat content of the substrates. These could be overcome by mixing the substrates and using a circulation pump in the reactor for improved back-mixing. As a result, the highest average methane yield of 0.65 NLCH4·gTS eli−1 was achieved in mesophilic operation at an organic loading rate (OLR) of 4.2 gTS·L−1·d−1.
The pressure-driven membrane separation processes ultrafiltration (UF) and reverse osmosis (RO) enable the effective purification of wastewater, in particular in combination, allowing organic and inorganic contaminants to be separated from the wastewater. Consequently, this work investigates the suitability of this technology for slaughterhouse wastewater (SWW) recycling. This was investigated by means of laboratory and bench-scale plant membrane experiments, whereby slaughterhouse wastewater (SWW) pre-treated by flotation was first treated with UF and then further purified with RO. Through the process combination UF + RO in the bench scale experiment, a reduction of the parameters total organic carbon (TOC), chemical oxygen demand (COD) of more than 98% and 97% for the parameter total nitrogen (TN) could be achieved. This means that wastewater reuse without product contact can be guaranteed. For direct process water reuse, only the concentration limit for ammonium could not be reached. In addition, scanning electron microscopy (SEM) images and energy dispersive X-ray spectroscopy (EDX) analyses of the RO membrane were carried out before and after the experiment, which did not indicate any scaling effects.
The implementation of research results in industrial applications is a crucial step in the development of innovative technologies. In this work, slaughterhouse wastewater recycling was successfully realized. The system, comprising a process combination of flotation, membrane bioreactor, and reverse osmosis, was able to treat the wastewater from a medium-sized poultry slaughterhouse in northwestern Tunisia. The process managed to treat approximately one-third of the wastewater to the required standard for agricultural irrigation. An additional 35% was purified to drinking-water quality. The remaining water was discharged as concentrate, meeting the necessary limits for indirect discharge. As a result, the slaughterhouse’s fresh water consumption was reduced by 35% and the amount of wastewater by around 70%. With the combined system, average reductions of 99%, 98%, and 96% were achieved for the parameters COD, TN, and electrical conductivity, respectively.